Sennheiser e 600 DRUM KIT Product specification e 602-II
Sennheiser e 600 DRUM KIT Manual
View all Sennheiser e 600 DRUM KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser e 600 DRUM KIT manual content summary:
- Sennheiser e 600 DRUM KIT | Product specification e 602-II - Page 1
use with bass drums, bass guitar cabs, tubas and other low frequency instruments. DELIVERY INCLUDES • e 602-II • pouch • quick guide • safety guide SPECIFICATIONS Transducer principle dynamic Frequency response 20 - 16,000 Hz Pick-up pattern cardioid Sensitivity (free field) 0.9 mV/Pa (at - Sennheiser e 600 DRUM KIT | Product specification e 602-II - Page 2
PRODUCT SPECIFICATION 2/2 evolution wired e 602-II DIMENSIONS 153 6.02" ⌀59,53 2.34" 36,66 1.44" 96,89 3.81" 104,7 4.12" XLR 3 POLAR PATTERN 30° 60° 90° 0° 0° 0 5 10 15 20 25 dB 120° 150° 180° 180° 30° 125 Hz 60° 250 Hz 500 Hz 1,000 Hz 90° 2,000 Hz 4,000 Hz 8,000 Hz 120° 16,000 Hz 150°
PRODUCT SPECIFICATION
evolution wired
e 602-II
1/2
FEATURES
•
Rugged, lightweight aluminium body for stable positio-
ning on long microphone boom arms
•
Lightweight high-performance voice coil construction
•
Fast transient response
•
Low frequency extension
•
Ideal for direct use on the most problematic bass signal
sources
•
Frequency-independent directivity provides isolation
from other on-stage signals
•
Hum compensating coil
•
Integral stand mount
DELIVERY INCLUDES
•
e 602-II
•
pouch
•
quick guide
•
safety guide
The e 602-II is a cardioid instrument microphone especially
suitable for use with bass drums, bass guitar cabs, tubas
and other low frequency instruments.
SPECIFICATIONS
Transducer principle
dynamic
Frequency response
20 - 16,000 Hz
Pick-up pattern
cardioid
Sensitivity (free field)
0.9 mV/Pa (at 50 Hz)
0.25 mV/Pa (at 1 kHz)
Nominal impedance (at
1
kHz)
350 Ω
Min. terminating impedance
1 kΩ
Connector
XLR-3
Dimensions
⌀ 60 x 153 mm
Weight
318 g
ARCHITECT‘S SPECIFICATION
The microphone shall be a dynamic cardioid designed for
use with low frequency instruments. It shall have a rugged
aluminium body with an integral stand mount and shall be
fitted with a hum compensating coil.
The frequency response shall be 20 Hz – 16,000 Hz and
the sensitivity (free field, no load) shall be 0.25 mV/Pa at
1
kHz and 0.9 mV/Pa at 50 Hz. Nominal impedance shall be
350
Ω, with a min. terminating impedance of 1 kΩ.
The microphone shall provide a 3-pin XLR
connector. Di-
mensions shall be 60 x 153 mm
(2.36" x 6.02"). Weight shall
be 318
grams (11.22 oz).
The microphone shall be the Sennheiser e 602-II.