Sennheiser TeamConnect Ceiling 2 TeamConnect Ceiling 2 and biamp TesiraFORTEr
Sennheiser TeamConnect Ceiling 2 Manual
 |
View all Sennheiser TeamConnect Ceiling 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser TeamConnect Ceiling 2 manual content summary:
- Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 1
TeamConnect Ceiling 2 System design guide for Microsoft Teams certified bundle of Sennheiser TeamConnect Ceiling 2 and biamp TesiraFORTÉ® AVB VT4 Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com AN 1255 v1.0 - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 2
be integrated to support a Large Meeting Room Space. In this document a large meeting room is defined as a meeting space about 4.5 m x 8.5 m (15' x 28'). Equipment list Below is the list of equipment used in this system configuration: 1 TeamConnect Ceiling 2 Ceiling microphone array 1 Microsoft - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 3
Application Note for TesiraFORTÉ TeamConnect Ceiling 2 Equipment installation The diagram below provides an example of all hardware. For assistance locating an integrator, please contact the Sennheiser Customer Service. Connect the hardware components as outlined in the diagram below. AN 1255 v1 - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 4
support the room design requirements. A single AEC input channel on the TesiraFORTÉ AVB VT4 will support the connection to the TeamConnect Ceiling 2 via the Dante to analog convertor. A single analog output channel Output block sends the microphone audio to the Microsoft Teams Room System for transmission to the far end - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 5
Application Note for TesiraFORTÉ TeamConnect Ceiling 2 Each C-IC6 loudspeaker will be connected directly to the AMP-450BP using standard CAT cable. A custom block with the recommended C-IC6 EQ curve has been added before the output. Each AMP-450BP channel will support up to two C-IC6 loudspeakers. - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 6
Application Note for TesiraFORTÉ TeamConnect Ceiling 2 Setting the audio device from the Teams Room System Setup and deployment of specific Microsoft Teams Rooms hardware may vary, please see manufacturer documentation for proper operation. The Biamp Tesira system enumerates as a USB audio - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 7
the EX-UBT USB Output block. By default, the Microsoft Teams Room System volume control will set to 50 when a meeting is started. This level will be reflected in the EX-UBT USB Input block as shown on the image to the right. The TeamConnect Ceiling 2 can be controlled by a 3rd party device - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 8
Ceiling 2 Setup and Configuration The TeamConnect Ceiling 2 is a ceiling mounted dynamic beamforming microphone. It supports both Dante (input/output) and auxiliary balanced analog (output) connections for audio transport. A PoE/Control connection and the Sennheiser Control Cockpit software manually - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 9
setup it is advisable to provide the AEC-reference signal (i.e. as being played back by the loudspeakers) to the TeamConnect Ceiling 2's reference-input-channel (1st Dante input-channel), so the beam-steering can be stabilized during far end speech. Use the Dante-Controller-Software in Sennheiser - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 10
for TesiraFORTÉ TeamConnect Ceiling 2 Networking Details This system deployment makes use of PoE+ powered endpoints. The TesiraCONNECT provides all necessary resources to support these communications. Setup Requirements: • The TesiraCONNECT TC-5 requires no configuration to support Tesira device - Sennheiser TeamConnect Ceiling 2 | TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 11
TeamConnect Ceiling 2 Microphone and speaker placement Microphone placement The laws of physics can't be ignored when deciding on the right placement of a microphone right spot for a microphone. An ideal positioning of multiple ceiling speakers will achieve an even SPL coverage and a good speech
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
TeamConnect Ceiling 2
System design guide for Microsoft Teams certified
bundle of Sennheiser TeamConnect Ceiling 2
and biamp TesiraFORTÉ® AVB VT4
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
AN 1255 v1.0