Sealey PW1712 Instruction Manual

Sealey PW1712 Manual

Sealey PW1712 manual content summary:

  • Sealey PW1712 | Instruction Manual - Page 1
    PW1712 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS an authorised agent to service the unit. 99
  • Sealey PW1712 | Instruction Manual - Page 2
    , durable wheels and shoulder strap for easy transportation. 3. specification Model No PW1712 Battery Type Lead Acid Maximum Pressure 8.5bar/123psi Water Flow Rate 2.5ltr/min Motor the holes in the nozzle body (fig.7.A) © Jack Sealey Limited Original Language Version pW1712 | Issue 3 08/05/17
  • Sealey PW1712 | Instruction Manual - Page 3
    screws located on bottom of base, remove cover to access battery. Slide out battery and disconnect. Dispose of battery in an environmentally protective way. Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing
  • 1
  • 2
  • 3

INSTRUCTIONS FOR
RECHARGEABLE PRESSURE WASHER 12V
MODEL NO:
PW1712
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1.
SAFETY
1.1.
ELECTRICAL SAFETY
(with respect to mains chargers)
±
WARNING! It is the user’s responsibility to check the following:
9
You must check the AC adaptor to ensure that it is safe before using. You must inspect the power supply lead, plugs and all electrical
connections for wear and damage. You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices.
An RCCB (Residual Current Circuit Breaker) should be incorporated in the main distribution board. We recommend that an RCD
(Residual Current Device) is used with all electrical products. It is particularly important to use an RCD with portable products that plug
into an electrical supply not protected by an RCCB. If in doubt consult a qualified electrician. You can obtain a Residual Current Device
through your Sealey stockist. You must read and understand instructions concerning electrical safety.
9
The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified
person, using a Portable Appliance Tester (PAT), at least once a year.
9
The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and
the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician.
9
Ensure that the insulation on all cables and the product itself is safe before connecting to the mains power supply.
9
Ensure that cables are always protected against short circuit and overload.
9
Regularly inspect power supply, leads, plugs for wear and damage and power connections to ensure that none is loose.
9
Check product voltage is the same as power supply to be used.
1.2.
GENERAL SAFETY
±
WARNING! DO NOT
use the washer if any part of the unit, gun, nozzle, detergent bottle, hose or cables is damaged. Replace or
repair using genuine parts only. Unauthorised parts may be dangerous and will invalidate your warranty. Always check connections
are correctly secured and not cracked or damaged in any way before using the machine.
9
Always be aware of the potential hazards that may occur during use. Study the applications and limitations of the washer before use.
9
Keep the washer in good condition. Use an authorised agent to service the unit.
9
Wear adequate protective clothing, goggles and anti-slip rubber soled footwear.
9
Use where air can freely circulate around the washer to avoid the machine over-heating.
±
WARNING!
Ensure all persons and animals keep at a minimum distance of 15mtr from the washer when in use.
±
WARNING!
The pressure washer must only be used with clean water. Non-filtered water or corrosive chemicals must not be used as
they will damage the cleaner.
9
Release residual pressure before disconnecting hose.
9
Ensure the nozzle is aimed correctly at the working surface before activating the jet.
±
WARNING!
The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
±
WARNING! DO NOT
use the washer on any material containing asbestos as this may release hazardous asbestos particles
into the atmosphere.
8
DO NOT
touch charger with wet hands, to avoid the risk of electrocution. Keep all connections dry and off the ground.
8
DO NOT
direct jet against yourself, other persons or animals, electrical equipment or the machine itself.
8
DO NOT
use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT
use the washer with flammable or toxic liquids or any other product. Only use recommended detergent. Non-recommended
detergents may corrode the machine cover and accessories.
8
DO NOT
connect other appliances to the machine inlet or outlet.
8
DO NOT
move the unit by pulling the hoses or electrical cables. Use handle.
9
When not in use store in a frost proof, dry childproof location.
NOTE:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of
the appliance
in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
PW1712 | Issue 3 08/05/17
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection