Seagate ST250LT003 Momentus Thin (.2-4K) SATA Product Manual
Seagate ST250LT003 Manual
View all Seagate ST250LT003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate ST250LT003 manual content summary:
- Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 1
Product Manual Momentus® Thin 7200-RPM ST model # - Part # Standard models ST320LT007 - 9ZV142 ST250LT007 - 9ZV14C ST160LT007 - 9ZV14D Free-Fall Sensor models ST320LT011 - 9ZVG42 ST250LT011 - 9ZVG4C ST160LT011 - 9ZVG4D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 2
or registered trademarks are the property of their respective owners. No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission. One gigabyte, or GB, equals one billion bytes and one terabyte - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 3
Seagate Technology support services 1 2.0 Introduction 2 2.1 About the Serial ATA interface 3 3.0 Drive 10 3.9.5 Power-management modes 11 3.10 Supported ATA commands 26 6.3.1 Identify Device command 28 6.3.2 Set Features command 32 6.3.3 S.M.A.R.T. commands 33 Momentus Thin Product Manual - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 4
ii Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 5
and end view 20 Mounting dimensions (for standard models) - top, side and end view 21 Example of FIPS tamper evidence labels 22 Momentus Thin Product Manual, Gen-2 Rev. D iii - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 6
- Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 7
-us/support/warranty_&_returns_assistance For information regarding Data Recovery Services, visit http://www.i365.com For Seagate OEM & Distribution partner portal, visit https://direct.seagate.com/portal/system For Seagate reseller portal, visit http://spp.seagate.com Momentus Thin Product Manual - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 8
™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the industry's most comprehensive protection for disk drives. • Support for S.M.A.R.T. drive monitoring and reporting. • Support for Read Multiple and Write Multiple commands. 2 Momentus Thin Product Manual, Gen-2 Rev - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 9
legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current manages two sets of shadow registers. This is not a typical Serial ATA environment. The Serial ATA host adapter and drive Product Manual, Gen-2 Rev. D 3 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 10
phrases the drive and this drive are used throughout this manual to 448 4096 488,397,168 Physical read/write heads 2 Disks Cache (MB) Recording density in BPI (bits/in transfer rate (Gb/s max) 3.0 ATA data-transfer modes supported SATA 1.0, Serial ATA Revision 2.6 PIO modes 0-4 Multiword DMA - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 11
Vibration, nonoperating Drive acoustics, sound hard power on/off cycles To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/www/en-us/support drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 12
billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating 100-103) for additional information about 48bit addressing support of drives with capacities over 137GB. 3.3 Default logical geometry disks 1 6 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 13
seek times Typical seek times (ms) Track-to-track Average Average latency Read 1.5 11 4.17 Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 14
of drives tested, under nominal conditions, at 25°C ambient temperature. These power measurements are done with Interface Power Management modes the drive spindle reaches operating speed. • Seek mode During seek mode, the read/write actuator arm moves toward a specific position on the disk surface - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 15
power to operational levels. **Standby power is measured at steady state (after 200ms from transition) Momentus Thin Product Manual, Gen-2 Rev. D 9 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 16
Deferred spinup Momentus Thin drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400.3 SATA Blade Server family of drives. 3.9.3 Conducted noise Input Voltage tolerance (including noise): 5V ± 10% 10 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 17
to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disk access is necessary. Momentus Thin Product Manual, Gen-2 Rev. D 11 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 18
temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Above 1000 feet (305 meters), the maximum temperature is derated linearly by 1°C ft) -304.8 m to 12,192 m (-1000 ft to 40,000+ ft) 12 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 19
These drives comply with level that the drive can experience level that the drive can experience without level that the drive can experience without drive is mounted securely with the input vibration applied at the drive vibration levels that the drive may experience while meeting that the drive may - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 20
levels for steady state, idle, and active seek modes of operation. Table 5: Drive A-weighted Sound Power Levels (SWL, BA) Idle* 2.3 bels (typ) is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to 14 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 21
on/off cycles 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance You will be asked to provide the - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 22
FCC verification These drives are intended device). As such, each drive is considered to be Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive manufacturer's instructions, may Television Interference Problems. This - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 23
by the China RoHS MCV Standard. "X RoHS MCV 3.16 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light materials near circuitry with sulfide-free alternatives. Momentus Thin Product Manual, Gen-2 Rev. D 17 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 24
needed to service the drive. Other labels are used to seal out dirt and contamination. 4.2 Configuring the drive Each drive on the jumpers on this drive for proper operation. If the host system does not support SATA 3Gb/s operation, place a jumper on pins 1 and 2 to limit the drive to 1.5Gb/s - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 25
drive or host. For direct backplane connection, the drive connectors are inserted directly into the host receptacle. The drive drive Drive mounting You can mount the drive around the entire perimeter of the drive for cooling. • Use only excessive drive hard errors Non-operating with no hard - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 26
Evident Stickers with the marking "Tamper Indicator - Do Not Remove". These stickers must remain attached to provide the tamper evidence throughout the life of the drive. Removing these stickers will indicate tampering and void the drive warranty. 20 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 27
Figure 5. Mounting dimensions (for standard models) - top, side and end view Momentus Thin Product Manual, Gen-2 Rev. D 21 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 28
components. Federal Information Processing Standard (FIPS) 140-2 Level 2 Certification requires drives to go through government agencies certifications to add requirements for physical tamper-evidence . Figure 6. Example of FIPS tamper evidence labels. 22 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 29
Note. May not represent actual drive. Momentus Thin Product Manual, Gen-2 Rev. D 23 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 30
input/output (PIO) modes 0-4; multiword DMA modes 0-2, and Ultra DMA modes 0-6. The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers. For detailed 2nd mate Key and spacing separate signal and power segments 24 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 31
each voltage is used for pre-charge when installed in a blind-mate backplane configuration. 4. All used voltage pins (Vx) must be terminated. Momentus Thin Product Manual, Gen-2 Rev. D 25 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 32
ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Disable Operations B0h/D9h S.M.A.R.T. Enable/Disable Autosave B0h/D2h 26 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 33
Sectors Write Sectors Extended 30h, 31h 34h Write Uncorrectable 45h ATA-standard power-management commands Check Power Mode E5h Idle E3h Idle Immediate E1h Sleep E6h Standby E2h Security Freeze Lock F5h Security Disable Password F6h Momentus Thin Product Manual, Gen-2 Rev. D 27 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 34
Parameters listed with an "x" are drive-specific or vary with the state of the drive. The following commands contain drive-specific features that may not Write multiple (16) Reserved Standard Standby timer, IORDY supported and may be disabled ATA-reserved PIO data-transfer cycle Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 35
related information). Retired Multiword DMA active and modes supported (see note following this table) Advanced PIO modes supported (modes 3 and 4 supported) Minimum multiword DMA transfer cycle time per word 4001H 4000H 30xxH 0001H 4000H xx7FH 0000H Momentus Thin Product Manual, Gen-2 Rev. D 29 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 36
reset value (see description following this table) Auto acoustic management setting ATA-reserved 100- 103 Total number of user-addressable LBA sectors available (see Section 3.2 for related information) These words are required for drives that support the 48-bit addressing feature. Maximum value - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 37
supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported 6 Ultra DMA mode 6 is supported cable detected, CBLID below VIL Momentus Thin Product Manual, Gen-2 Rev. D 31 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 38
and generates an interrupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features values of the features are as indicated above. 32 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 39
for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports Manual, Gen-2 Rev. D 33 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 40
34 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 41
4, 7 ATA commands 26 ATA data-transfer modes supported 4 Australia/New Zealand Standard AS/NZ CISPR22 16 Conducted noise 10 Conducted RF immunity 14 Configuring the drive 18 connectors 19 CSA60950-1 15 current 4 cycles 15 26 dimensions 20, 21 Disks 4 dissipation 8 Download Manual, Gen-2 Rev. D 35 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 42
temperature 12 Microcode 26 mounting 19 mounting screws 13 mounting the drive 18 36 N National Institute of Standards and Technology 22 NIST consumption 8 power dissipation 8 power management 11 power on/off cycles 15 Power specifications 8 Power-management modes 11 Power-on to Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 43
4 Start/stop times 8 Startup current 4 static-discharge 18 support services 1 Surge immunity 14 T tamper evident stickers 20 technical support services 1 temperature 5, 7, 12 Temperature gradient 5, 12 timers 11 TPI Extended 27 write uncorrectable 27 Momentus Thin Product Manual, Gen-2 Rev. D 37 - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 44
38 Momentus Thin Product Manual, Gen-2 Rev. D - Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 45
- Seagate ST250LT003 | Momentus Thin (.2-4K) SATA Product Manual - Page 46
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100625253, Rev. D
Product Manual
Momentus
®
Thin
7200-RPM
Gen-2
100625253
Rev. D
March 2011
ST model # - Part #
Standard models
ST320LT007 - 9ZV142
ST250LT007 - 9ZV14C
ST160LT007 - 9ZV14D
Free-Fall Sensor models
ST320LT011 - 9ZVG42
ST250LT011 - 9ZVG4C
ST160LT011 - 9ZVG4D
ST model # - Part #
SED model
ST320LT014 - 9YK142
ST250LT014 - 9YK14C
ST160LT014 - 9YK14D
SED (FIPS 140-2) models
ST320LT009 - 9WC142
ST250LT009 - 9WC14C
ST160LT009 - 9WC14D