Seagate Enterprise Capacity 3.5 HDD/Constellation ES Constellation ES.2 SAS Pr
Seagate Enterprise Capacity 3.5 HDD/Constellation ES Manual
View all Seagate Enterprise Capacity 3.5 HDD/Constellation ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate Enterprise Capacity 3.5 HDD/Constellation ES manual content summary:
- Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 1
Product Manual Constellation® ES.2 SAS Standard Model ST33000650SS Self-Encrypting Drive Model ST33000651SS SED FIPS 140-2 Model ST33000652SS 100628615 Rev. C March 2011 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 2
LLC All rights reserved. Publication number: 100628615, Rev. C March 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Constellation ES.2 and SeaTools are either trademarks or registered trademarks of - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 3
Contents 1.0 Seagate Technology support services 1 2.0 Scope Cache operation 12 5.5.1 Caching write data 13 5.5.2 Prefetch operation 13 6.0 Drive Self Test (DST 18 6.2.7 Product warranty 20 7.0 Physical/electrical specifications 21 7.1 Constellation ES.2 SAS Product Manual, Rev. C i - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 4
45 12.1.1 task management functions 45 12.1.2 task management responses 45 12.2 Dual port support 46 12.3 SCSI commands supported 47 12.3.1 Inquiry data 51 12.3.2 Mode Sense data 51 12.4 Miscellaneous operating features and conditions 54 ii Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 5
12.4.7 Power 59 12.5 Signal characteristics 59 12.5.1 Ready LED Out 59 12.5.2 Differential signals 60 12.6 SAS-2 Specification Compliance 60 12.7 Additional information 60 Constellation ES.2 SAS Product Manual, Rev. C iii - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 6
iv Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 7
. Figure 11. Figure 12. Figure 13. 3TB model current profiles 25 3TB models (3Gb) DC current and power vs. input/output operations per second 26 3TB models (6Gb) DC current and power vs. input/output (detail 57 SAS transmitters and receivers 59 Constellation ES.2 SAS Product Manual, Rev. C v - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 8
vi Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 9
/www/en-us/support/warranty_&_returns_assistance For information regarding Data Recovery Services, visit http://www.i365.com For Seagate OEM & Distribution partner portal, visit https://direct.seagate.com/portal/system For Seagate reseller portal, visit http://spp.seagate.com Constellation ES.2 SAS - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 10
2.0 Scope This manual describes Seagate Technology® LLC, Constellation® ES.2 SAS (Serial Attached SCSI) disk drives. Constellation ES.2 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 11
by bottom holes must meet the requirements of Section 11.3. 3.1 Standards The Constellation ES.2 family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate SAS Interface Manual, part number 100293071. The drives are recognized in accordance with UL - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 12
system with this Seagate model complies with the Constellation ES SAS • Certificate number: STX-ST33000650SS • Manufacturing date: July 2, 2010 (Date of Certification) • Manufacturer/nationality: USA, Singapore and China Taiwanese BSMI If this model Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 13
and materials that comply with the RoHS Directive. A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers defined by the China RoHS MCV Standard. "X RoHS MCV Constellation ES.2 SAS Product Manual, Rev. C 5 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 14
SAS-2) Standard (T10/1562-D) ISO/IEC 14776-xxx SCSI Architecture Model-3 (SAM-4) Standard (T10/1561-D) ISO/IEC 14776-xxx Seagate part number: 30553-001 In case of conflict between this document and any referenced document, this document takes precedence. 6 Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 15
the HDA and do not attempt to service items in the sealed enclosure (heads, media, actuator, etc.) as this requires special facilities. The drive does not contain user-replaceable parts. Opening the HDA for any reason voids your warranty. Constellation ES.2 drives use a dedicated load/unload zone at - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 16
Constellation ES.2 drives have the following standard features: • Perpendicular recording technology • 1.5 / 3.0 / 6.0 Gb Serial Attached SCSI (SAS) interface • Integrated dual port SAS controller supporting the SCSI protocol • Support for SAS expanders and fanout adapters • Firmware downloadable - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 17
standard Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.) • 5-year warranty 4.5 Formatted capacities Standard OEM models are formatted to 512 bytes per block. The block standard OEM drive shipped, but extra copies may be ordered. Constellation ES.2 SAS Product Manual, Rev. C 9 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 18
of temperature, voltage, and horizontal orientation as measured on a representative sample of drives. 4. Access time = controller overhead + average seek time and applies to all data transfer commands. Access to data = access time + latency time. 10 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 19
non-SED drive of the same capacity. 5.2.3 General performance characteristics Minimum sector interleave Data buffer to/from disk media (one 512-byte logical block)* Sustained transfer rate seconds. There is no power control switch on the drive. Constellation ES.2 SAS Product Manual, Rev. C 11 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 20
of the buffer. If the cache is enabled (see RCD bit in the SAS Interface Manual), data requested by the host with a read command is retrieved from the buffer, if possible, responds as it does for any attempt to change an unchangeable parameter. 12 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 21
if cache operation is disabled). Though the prefetch operation uses the buffer as a cache, finding the requested data in the buffer is a prefetch hit, not a cache operation hit. To enable Prefetch, use Mode a prefetch hit is not likely to occur. Constellation ES.2 SAS Product Manual, Rev. C 13 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 22
detected during read operations, but not caused by the read. If an unrecoverable data error is detected, a MEDIUM ERROR (03h) in the Sense Key will be reported. Multiple unrecoverable data errors resulting from the same cause are treated as 1 error. 14 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 23
data as transmitted by the device port connected to the receiver. The error may be detected as a running disparity error, illegal code, loss of word sync, or CRC error. 6.2 Reliability and service You can enhance the reliability of Constellation ES Constellation ES.2 SAS Product Manual, Rev. C 15 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 24
warning of a failure to allow you to back up the data before an actual failure occurs. Note. The drive's firmware monitors specific attributes for degradation over time but can't predict number of operations is referred to as the Interval Counter. 16 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 25
the drive is performing unacceptably for a period of time. The firmware keeps a running count of the number of times the error is reported in the FRU code field of mode sense data. You can use this information to determine if the warning Temperature Constellation ES.2 SAS Product Manual, Rev. C 17 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 26
drive fails the test, remove it from service and return it to Seagate for service. 6.2.6.1 DST failure definition The drive will of the number of retries required to recover the data. The following conditions are considered DST failure conditions: 18 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 27
self-test results log parameter section of the log page. Existing data will be moved to make room for the new parameter block a self-test is complete or has been aborted, the drive updates the Self-Test Results Value field in its SelfTest Results Log Constellation ES.2 SAS Product Manual, Rev. C 19 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 28
information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty. 20 Constellation ES.2 SAS Product Manual, Rev - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 29
command (OPERATION CODE 1Bh). This allows the host to directly transition the drive to any supported PowerChoice mode. If both the Power Condition mode page and START STOP UNIT command methods are values defined in the Power Condition mode page. Constellation ES.2 SAS Product Manual, Rev. C 21 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 30
Product Data (VPD) Page (VPD page 0x8A) • Supported power models. This represents a small additional drain on the 5V supply of about 30mA and a commensurate increase of about 150mW in power consumption. There is no additional drain on the 12V supply. 22 Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 31
Table 2: 3000GB drive (Standard & SED model) DC power requirements Notes 3.0Gb mode (Amps) (Amps) 6.0Gb mode (Amps) (Amps) Voltage Regulation Avg idle current DCX Advanced idle and that the drive is able to accept selection by the host initiator. Constellation ES.2 SAS Product Manual, Rev. C 23 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 32
20 KHz to 5 MHz. 7.3.2 Power sequencing The drive does not require power sequencing. The drive protects against inadvertent writing during power-up and down. 24 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 33
7.3.3 Current profiles The +12V (top) and +5V (bottom) current profiles for the Constellation ES drives are shown below. Figure 1. 3TB model current profiles Note: All times and currents are typical. See Table 2 for maximum current requirements. Constellation ES.2 SAS Product Manual, Rev. C 25 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 34
on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. Figure 2. 3TB models (3Gb) DC current and power vs. input/output operations per second Note. For power details about SED vs. non-SED drive, please refer to section 7.8. 26 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 35
watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. Figure 3. 3TB models (6Gb) DC current and power vs. input/output operations per second For power details about SED vs. non-SED drive, please refer to section 7.8. Constellation ES.2 SAS Product Manual, Rev. C 27 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 36
hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. Check Point Figure 4. Location of the HDA b. Non-operating 5% to 95% non-condensing relative humidity. 28 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 37
200 Gs at a maximum duration of 0.5ms (half sinewave) does not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis. Constellation ES.2 SAS Product Manual, Rev. C 29 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 38
less by Seagate for general freight shipment shall withstand a drop test from 48 in (1070 mm) against a concrete floor or equivalent. Z Y X X Z Y Figure 5. Recommended mounting Note. Image is for reference only, may not represent actual drive. 30 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 39
installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic Constellation ES.2 SAS Product Manual, Rev. C 31 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 40
eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. 7.5.8 Electromagnetic susceptibility See Section 3.1.1.1. 32 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 41
Form Factor Standard documented in SFF-8301 and SFF-8323, found at www.sffcommittee.org. in mm Breather Hole in mm Figure 6. Mounting configuration dimensions Constellation ES.2 SAS Product Manual, Rev. C in mm 33 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 42
for Cryptographic Modules". The initial publication was on May 25, 2001 and was last updated December 3, 2002. Purpose The National Institute of Standards and Technology (NIST) issued FIPS tamper evidence labels. Note. Does not represent actual drive. 34 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 43
to the Locking SP is available using the BandMasterX or EraseMaster passwords. Since the drive owner can define up to 16 data bands on the drive, each data band has its own password called BandMasterX where X is the number of the data band (0 through 15). Constellation ES.2 SAS Product Manual, Rev - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 44
the drive overwrites the old key with the new one, and keeps no history of key changes, the user data can never be recovered. This is tantamount to an instantaneous data erase and is very useful if the drive is to be scrapped or redispositioned. 36 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 45
) • Security Protocol In (A2h) 9.10 RevertSP The SED models will support RevertSP feature where it erases all data in all bands on the device and returns the contents of all SPs (Security Providers) on the device to their Original Factory State. Constellation ES.2 SAS Product Manual, Rev. C 37 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 46
Seagate provides the following technologies used to increase data Data command. Details of the SCSI commands supported by the drive are described in the SAS Interface Manual Recovery mode page. The drive firmware error recovery algorithms consist of 12 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 47
into service by the host system. On regular duty drives, if the host system makes use of the BMS Log Page, it can avoid placing data in suspect locations on the media. Unreadable and recovered error sites will be logged or reallocated per ARRE/AWRE settings. Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 48
immediately to service host commands data. DAR is most effective when AWRE and ARRE are enabled-this is the default setting from the Seagate data to the original location. If a verification of this rewrite fails, the sector is re-mapped to a spare location. 40 Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 49
part of the data transferred to the 3 - Seagate products do not support Type 3. supported and which PI fields the drive supports checking. Note. For further details with respect to PI, please refer to SCSI Block Commands - 3 (SBC-3) Draft Standard documentation. Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 50
feet). Slide the carrier or tray into the appropriate bay in your host system using the instructions provided by the host system. This connects the drive directly to your system's SAS connector. , which are the two preferred mounting orientations. 42 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 51
or in reverse direction (side to side) Figure 9. Air flow Above unit Under unit Note. Image is for reference only, may not represent actual drive. Constellation ES.2 SAS Product Manual, Rev. C 43 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 52
you do not provide the maximum surface area ground connection between system ground and drive ground. This is the system designer's and integrator's responsibility. 44 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 53
the interface requirements as implemented on Constellation ES.2 drives. Additional information is provided in the SAS Interface Manual (part number 100293071). 12.1 SAS features This section lists the SAS-specific features supported by Constellation ES.2 drives. 12.1.1 task management functions - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 54
drives support: • Concurrent port transfers-The drive supports receiving COMMAND, TASK management transfers on both ports at the same time. • Full duplex-The drive supports sending XFER_RDY, DATA and RESPONSE transfers while receiving frames on both ports. 46 Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 55
Behavior page (C3h) Firmware Numbers page (C0h) Implemented Operating Def page (81h) Jumper Settings page (C2h) Supported Vital Product Data page (00h) Unit 4Ch 4Dh Supported N N N N Y N Y Y Y Y Y N Y Y Y Y Y Y Y Y N Y Y N Y Y N N N Y Y Y N Y Y N Constellation ES.2 SAS Product Manual, Rev. C 47 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 56
supported FUA bit supported Read (12) A8h Read (16) 88h Read (32) 7Fh/0009h Read Buffer (modes 0, 2, 3, Ah and Bh supported) 3Ch Supported N N Y Y Y N Y Y Y Y Y Y [2] Y Y [2] Y Y Y Y Y Y N Y Y Y Y Y N Y Y Y N Y Y Y Y N Y N Y (non-SED drives only) 48 Constellation ES.2 SAS Product Manual - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 57
Constellation ES.2 SAS Product Manual, Rev. C Command code 25h 9Eh/10h 37h B7h 3Eh 9Eh/11h 07h 1Ch 17h 57h A0h 03h 16h 56h 01h 31h 30h 32h A2h B5h 0Bh 2Bh 1Dh 33h 1Bh 35h 91h 00h Supported Y Y Y Y Y (non-SED drives only) Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y N Y N N N Y (SED models only) Y (SED models - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 58
result in firmware corruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. 50 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 59
the SAS Interface Manual. Table 7: Bytes 0-15 16-31 32-47 48-63 64-79 80-95 96-111 112-127 128-143 Constellation ES.2 inquiry data Data (hex) 's PCB. These default values can be changed only by downloading a complete set of new firmware into the flash E-PROM. An initiator can request and receive - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 60
the data bytes returned by the drive in response to the Mode Sense command pages for SCSI implementation (see the SAS Interface Manual ). DEF = Default value. Standard OEM drives are shipped configured this way. CHG = Changeable bits; indicates if default value is changeable. 52 Constellation ES - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 61
and default values for 3TB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 01 5d 50 a3 b0 00 00 00 00 00 00 ff ff ff ff ff 00 00 DEF 80 06 00 80 0f 00 00 00 CHG 80 06 b7 c0 0f 00 00 00 Constellation ES.2 SAS Product Manual, Rev. C 53 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 62
bytes Table 10: Miscellaneous status Supported Y Y Y Y Y Y Y Y N N Status Good Check condition Condition met/good Busy Intermediate/good Intermediate/condition met/good Reservation conflict Task set full ACA active ACA active, faulted initiator 54 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 63
of the SAS connector. Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate's SAS drives are provided in the SAS Interface Manual. Figure 10. Physical interface Constellation ES.2 SAS Product Manual, Rev. C 55 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 64
1.27 (14X) 1.27 (6X) 5.08 B 0.84 0.05 (22X) 0.15 B 4.90 0.08 P15 P1 S1 S7 CL OF DATUM B Figure 11. SAS device plug dimensions 56 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 65
SURFACE FLUSH TO DATUM A 0.03 1.23 0.05 65 30 0.08 0.05 Detail 2 1.90 0.08 2.40 0.08 0.10 A D Figure 12. SAS device plug dimensions (detail) SECTION B - B Constellation ES.2 SAS Product Manual, Rev. C 57 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 66
S12* -Port B_out Diff output pair S13* +Port B_out S14 Port B Ground * - Short pin to support hot plugging NC - No connection in the drive. Pin Signal name Signal type P1* NC (reserved 3.3Volts) Volts charge P14* 12 Volts P15* 12 Volts 58 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 67
down Format in progress, each cylinder change Off On Blinks steadily (50% on and 50% off, 0.5 seconds on and off for 0.5 seconds) Toggles on/off Constellation ES.2 SAS Product Manual, Rev. C 59 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 68
layers of the SAS interface, refer to the Seagate SAS Interface Manual, part number 100293071. For more information about the SCSI commands used by Seagate SAS drives, refer to the Seagate SCSI Commands Reference Manual, part number 100293068. 60 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 69
/write 10 data rate internal 10 data transfer rate 11 DC power 58 requirements 22 Decision Feedback Equalizer 60 decrypt 35 default MSID password 36 defect and error management 38 defects 38 Deferred Auto-Reallocation 40 deferred error handling 54 DEK 35 Constellation ES.2 SAS Product Manual, Rev - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 70
minimum 11 intermediate/condition met/good status 54 intermediate/good status 54 internal data rate 10 internal defects/errors 38 internal drive characteristics 10 IRAW 40 J jumpers 42 K KCC 4 Korean Communications Commission 4 Korean KCC 4 62 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 71
average rotational 10, 11 Locking SP 35 LockOnReset 36 logical block Synchronized (locked) spindle operation 54 Zero latency read 54 miscellaneous status support ACA active 54 ACA active, faulted initiator 54 Busy 54 Check condition of data at rest 35 Constellation ES.2 SAS Product Manual, Rev. C 63 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 72
Manual support services 1 temperature 28, 43 limits 28 non-operating 28 regulation 3 See also cooling terminate task function 45 terminators 42 tracks per inch 10 tracks per surface 10 transmitters 59 transporting the drive 20 Trusted Computing Group 35 Type 1 PI format 41 64 Constellation ES - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 73
Type 2 PI format 41 U unformatted 9 Unrecoverable Errors 14 unrecovered media data 14 V vibration 29, 31 W warranty 20 Z zero latency read 54 Constellation ES.2 SAS Product Manual, Rev. C 65 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 74
66 Constellation ES.2 SAS Product Manual, Rev. C - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 75
- Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES.2 SAS Pr - Page 76
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100628615, Rev. C
Product Manual
Constellation
®
ES.2 SAS
100628615
Rev. C
March 2011
Standard Model
ST33000650SS
Self-Encrypting Drive Model
ST33000651SS
SED FIPS 140-2 Model
ST33000652SS