Pyle PSTND14 PSTND14 Manual 1
Pyle PSTND14 Manual
 |
View all Pyle PSTND14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PSTND14 manual content summary:
- Pyle PSTND14 | PSTND14 Manual 1 - Page 1
Support Bookshelf / Monitor Speaker Stands http://www.pyleaudio.com Thank you for purchasing the PSTND14. Use this pair of bookshelf speaker stand to keep your speakers nuts. They are the same size and interchangeable. The following instructions are for the construction of one of your stands. To - Pyle PSTND14 | PSTND14 Manual 1 - Page 2
1. Begin with the larger base plate. Insert four (4) black screws through the underside of the plate. 3. Place a nut in the hex-holed plastic stopper and screw this whole structure each black screw with the nut facing up, or away from the plate. For now, keep the nuts loose -- the two plastic - Pyle PSTND14 | PSTND14 Manual 1 - Page 3
4. Now, fit the four (4) steel columns onto each pole. 7. Repeat the stopper procedure for this plate; line up two rubber stoppers with the hex side up, slide on the plastic stopper combo, and then loosely screw on a nut to hold into place. 5. Now, tighten all the screws to secure the stand. - Pyle PSTND14 | PSTND14 Manual 1 - Page 4
pair, simply repeat these instructions from step 1. Be sure to fill out your warranty card or submit your product registration online at www.pyleaudio.com. Product Specifications One Pair of Speaker Stand For A Large Bookshelf Speaker Perfect For Home, Project Or Professional Recording Studios
-
1 -
2 -
3 -
4
 |
 |
1
PSTND14
Heavy-Duty Steel Quad Support
Bookshelf / Monitor Speaker Stands
Thank you for purchasing the PSTND14. Use this pair of bookshelf speaker stand to keep your
speakers stable and secure. Heavy-duty steel construction looks great, conceals cables, and
optimizes the performance of your speaker by minimizing floor distortion. The columns can even be
sand-loaded to deaden resonance and increase stability. Adjustable spikes on bottom of stand
provide additional security. Maximum weight capacity: 75 lbs. Setup height: 38".
Your kit includes two (2) sets of the following items:
1 x large base plate
1 x speaker plate
4 x steel columns
2 x sticky-backed pads
8 x long black screws
4 x silver spikes
4 x silver nuts
12 x black nuts
16 x plastic stoppers
1 x Allen wrench
Note: your package may
include a different
amount of black and
silver nuts. They are the
same size and
interchangeable.
The following instructions are for the construction of one of your stands. To build the second stand,
simply follow the directions from the beginning again.