Polk Audio Monitor 60 Series II User Guide 1

Polk Audio Monitor 60 Series II Manual

Polk Audio Monitor 60 Series II manual content summary:

  • Polk Audio Monitor 60 Series II | User Guide 1 - Page 1
    to televisions or video monitors. All Models Feature Gold Plated 5-Way Binding Posts with dual inputs for bi-amplification or bi-wiring. Acoustically Inert 3/4" MDF Cabinets, finished in cherry or black oak real wood veneers. RTiA9 Floorstanding Loudspeaker Polk Audio 5601 Metro Drive, Baltimore
  • Polk Audio Monitor 60 Series II | User Guide 1 - Page 2
    Series Product Preview CSiA4 Center Channel F/Xi A 6 Surround Loudspeaker CSi Center Channel and F/Xi Bipole/Dipole Surrounds All Models Are Timbre-Matched to fit into any Polk Audio and highest performance surround effects. Center Channel Speakers Are Magnetically Shielded for safe placement near
  • 1
  • 2

RT
i
A9 Floorstanding Loudspeaker
Top View of RT
i
A Cabinet Design
PowerPort
Polk Audio
5601 Metro Drive, Baltimore, MD 21215
1-800-377-7655
www.polkaudio.com
Product
Preview
RT
i
A Series
Damped Asymmetric Hex Laminate
Isolation (DAHLI) Cabinet Design
Real Wood, Real High Performance
The new RT
i
A Series incorporates our latest Dynamic Balance
®
cone
drivers and 1" tweeters and elegantly redesigned cabinets that reflect
the latest styles. The floorstanding models feature “PowerPort
®
Plus,”
an enhancement of Polk
®
’s patented PowerPort venting technology.
As you can expect from this highly popular line, the performance
is classic Polk.
Damped Asymmetric Hex Laminate Isolation (DAHLI) Cabinet Design
for clean, accurate sound. The asymmetric design is made from
a 6-layer laminate with 5 viscous layers to create the optimal shear
damping (OSD) system, the process for which was specifically
developed for Polk. Their elegant styling aside, creating curved
cabinets not only results in a stronger, more rigid and acoustically
insert enclosure, but the curved walls also produce less audible
coloration from panel resonances.
All 2007 RT
i
A, CS
i
And F/X
®
i
Models Feature The Latest Generation
Dynamic Balance Drivers And Tweeters
The bass/midrange
drivers used throughout the RT
i
range employ polymer/mineral
composite cones.
1" Tweeter Is A Silk/Polymer Composite Dome
for smoother
response and better detail.
A Neodymium Magnet, Low-Viscosity Ferro-Fluid Cooling,
and a heat sink on the back of the magnet, create better power
handling and reliability.
All RT
i
A Models And CS
i
A6 Center Feature Polk’s Patented
PowerPort Technology
that reduces turbulence at the mouth
of the port. PowerPort vastly reduces “chuffing” or “port noise”
and provides deeper, more powerful, lower distortion bass than
could be achieved with conventional ported or sealed designs
of comparable size.
The Floorstanding Models,
RT
i
A5, RT
i
A7 And RT
i
A9 Feature
PowerPort Plus
an enhancement
in PowerPort technology. PowerPort
Plus uses two ports (one front, one
rear) and internal “plates” to further
reduce air turbulence and increase
bass efficiency. A computer designed
tweeter faceplate radius, tapered
enclosure and baffle edge radius all
contribute to minimizing diffraction
for more open and spacious imaging.
RT
i
A7 And RT
i
A9 Use Multiple Long-Throw 7" Subwoofers
to combine the wide dynamic range benefits of a single large sub-
woofer with the tight, punchy, accurate bass response of small
woofers. Combined with PowerPort Plus, these multiple subwoofers
deliver deep high impact bass with speed and accuracy.
Magnetically Shielded
to allow safe placement next
to televisions or video monitors.
All Models Feature Gold Plated 5-Way Binding Posts
with dual inputs for bi-amplification or bi-wiring.
Acoustically Inert 3/4" MDF Cabinets,
finished
in cherry or black oak real wood veneers.