Philips CCA194AT User manual

Philips CCA194AT Manual

Get Philips CCA194AT PDF manuals and user guides View all Philips CCA194AT manuals
Add to My Manuals
Save this manual to your list of manuals

Philips CCA194AT manual content summary:

  • Philips CCA194AT | User manual - Page 1
    Color TV with built-in VCR CCA194AT Owner's Manual Important! Return your Warranty Registration Card within 10 days. See why inside.
  • Philips CCA194AT | User manual - Page 2
    -SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Dear PHILIPS MAGNAVOX product owner: Thank you for your confidence in PHILIPS MAGNAVOX. read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
  • Philips CCA194AT | User manual - Page 3
    National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. As an ENERGY STAR® Partner, Philips Consumer Electronics Company
  • Philips CCA194AT | User manual - Page 4
    47 SmartLock 48-51 Sleep Timer 52 Wake Up Timer 53 Closed Caption 54-55 Volume Bar 56 Automatic Operation Features 57 Smart Picture 58 Remote Locator 59 Reminder 60 Index Search 61 Information You May Need Specifications 62 Glossary 63 Helpful Hints 64-65 Limited Warranty 66 Index 67
  • Philips CCA194AT | User manual - Page 5
    automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service. Helpful Hints • The remote control and its batteries are supplied. • Do not mix alkaline and manganese batteries. • Do not mix old
  • Philips CCA194AT | User manual - Page 6
    6 Hooking Up the TV/VCR 1 Hook up your TV/VCR using one of the connections shown. A. Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna Connect a Cable signal or an antenna to the ANT(enna) Jack. ANT. ANT. B. Hooking Up Your TV/VCR With a Cable Box To view any channel, set the TV/VCR
  • Philips CCA194AT | User manual - Page 7
    Hooking Up the TV/VCR (cont'd) 7 D. Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder) You may need this connection if you want to copy tapes. Details are on page 32. AUDIO/VIDEO OUT Jacks on VCR Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO Jack on the
  • Philips CCA194AT | User manual - Page 8
    TV/VCR, make sure batteries are in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn 10 instead.) 5 Use the CH(annel) m/n button or the Number buttons on the remote control to select a TV/VCR channel. Use the VOL(ume) m/nbutton to adjust
  • Philips CCA194AT | User manual - Page 9
    to select PRIM. SETUP. Then, press the F.FWD/B button. PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v button or the STOP/w button to choose SELECT LANGUAGE. Then, press the
  • Philips CCA194AT | User manual - Page 10
    to select PRIM. SETUP, then press the F.FWD/B button. PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 1 SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL REW MENU PLAY STOP F.FWD STATUS
  • Philips CCA194AT | User manual - Page 11
    Automatic Channel Setup (cont'd) 11 Adding/Deleting Channels 1 Press the COMBI button, then press the MENU button. TO ADJUST PRESS { / B CH123 > CHANNEL SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM SAVED 2 Press the PLAY/o button or the STOP/p button to select CHANNEL. TO ADJUST PRESS { / B
  • Philips CCA194AT | User manual - Page 12
    SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE
  • Philips CCA194AT | User manual - Page 13
    2 for PM. For example, for 9:30 PM, press 09, 30, 2. SET MANUAL CLOCK TIME 09 : 30 PM MONTH TO CORRECT PRESS CLEAR TO END PRESS EXIT 5-6 1999, press 07, 01, 99. The day of the week will appear automatically. SET MANUAL CLOCK TIME 09 : 30 PM DATE 07 / 01 / 99 THURSDAY TO CORRECT PRESS
  • Philips CCA194AT | User manual - Page 14
    SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE
  • Philips CCA194AT | User manual - Page 15
    set, repeat steps 1-5. Or, follow the steps on pages 12-13 to set the clock manually or pages 16-17 to set the clock with Manual PBS Channel Selection. 7 When the TV/VCR finds the PBS channel, the time will don't receive a PBS channel that carries a time signal in your area. Set the clock manually.
  • Philips CCA194AT | User manual - Page 16
    SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE
  • Philips CCA194AT | User manual - Page 17
    Setting the Clock (cont'd) 17 5 Press the PLAY/v button or the STOP/w button to select SET PBS CH. MANUAL. Then, press the F.FWD/B button. The default channel (02) flashes. 7 Wait for the TV/VCR to find the time. AUTO CLOCK (PBS) CH 02 TIME
  • Philips CCA194AT | User manual - Page 18
    SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE
  • Philips CCA194AT | User manual - Page 19
    SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] 1 POWER
  • Philips CCA194AT | User manual - Page 20
    remote control. 1 Turn on your Cable Box/DBS. Point the remote it. CABLE BOX CODES ARCHER..01, 05, 06, 44 MAGNAVOX 26 SAMSUNG 05, COMPONENTS EAGLE...........26, 40, 62 PHILIPS.........07, 23, 50 42, 44 97 UNIKA 01, 44 GENERAL ELECTRIC REALISTIC 44 UNIVERSAL.....42, 44, 52 01, 57 RECOTON
  • Philips CCA194AT | User manual - Page 21
    Zenith Cable Box, press Number buttons 2, 3. 6 Repeat step 1. If the remote control works your Cable Box/DBS, you're finished. If the remote control still doesn't work your Cable Box/DBS, repeat steps 2-5, using a different code for your brand, if available. POWER EJECT SLEEP/WAKE UP SPEED REC
  • Philips CCA194AT | User manual - Page 22
    Insert a video cassette tape here. Wireless Remote Sensor Receives a signal from your remote control so you can operate the TV/VCR long) of the channel you are watching. Details are on page 31. RECORD Light This light appears during a recording. It flashes slowly when the TV/VCR power is turned
  • Philips CCA194AT | User manual - Page 23
    Rear Panel 23 AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ANT. ANT(enna) Jack Connect your antenna or cable here. Details are on page six. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six.
  • Philips CCA194AT | User manual - Page 24
    24 Remote Control Buttons EJECT Button Press to eject the tape. SPEED Button Press to select the recording speed (SP or SLP). POWER Button Press to turn
  • Philips CCA194AT | User manual - Page 25
    Remote Control Buttons (cont'd) 25 PAUSE/STILL Button During recording, press to temporarily stop the recording. Press again to resume recording. Details are on page 30.
  • Philips CCA194AT | User manual - Page 26
    26 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR's brightness, picture, color, tint, and sharpness. 1 Press the COMBI button, then press the MENU button. K K TO ADJUST PRESS { / B > BRIGHTNESS PICTURE COLOR TINT SHARPNESS CHANNEL 2 Press the PLAY/v button or the STOP/w
  • Philips CCA194AT | User manual - Page 27
    Adjusting the Picture Controls (cont'd) 27 BRIGHTNESS PICTURE COLOR TINT SHARPNESS Press the REW(ind)/{ button to decrease a picture control. Press the F.FWD/B button to increase a picture control. Decrease decreased brightness decreased contrast paler more purple softer Increase increased
  • Philips CCA194AT | User manual - Page 28
    28 On-Screen Status Displays A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below. If you select STATUS ON, then select COUNTER ONLY OFF: q Whenever you
  • Philips CCA194AT | User manual - Page 29
    Playing 29 Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape's record tab has been removed, playback should start automatically. 2 If playback does not start automatically, press the COMBI button, then press the PLAY/v button to start playback
  • Philips CCA194AT | User manual - Page 30
    changed during recording.) 4 Press the REC(ord)/OTR button once to start recording. The RECORD light will glow. q If there is not a tape in the TV/VCR, NO CASSETTE flashes PAUSE/STILL button again or the REC(ord)/OTR button. The RECORD light will glow. 6 To stop recording, press the STOP/w button.
  • Philips CCA194AT | User manual - Page 31
    upper right corner of the screen. Recording will begin immediately. The RECORD light will appear. OTR CH12 LENGTH 0:30 4 Press the STOP/EJECT button , then press the CLEAR button, then press the STOP/w button on the remote control. Helpful Hints • To check the time remaining for an OTR after
  • Philips CCA194AT | User manual - Page 32
    . The TV/VCR power will turn on automatically. 4 Point the TV/VCR remote control at the TV/VCR. Press the COMBI button, then press Number buttons 0, 0 so that A/V IN appears on the screen. 5 Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed
  • Philips CCA194AT | User manual - Page 33
    Defeat Recording 33 Follow the steps below to prevent accidental recording. 1 Press the COMBI button, then press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select VCR SETUP, then press the F.FWD/B
  • Philips CCA194AT | User manual - Page 34
    you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power
  • Philips CCA194AT | User manual - Page 35
    will be set automatically.) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF - - : - - TO CORRECT PRESS CLEAR TO END PRESS EXIT Instructions continue on page 36. Helpful Hints • If the numbers entered do not match the TV/VCR's calendar, the entry will be rejected and a question mark
  • Philips CCA194AT | User manual - Page 36
    a different tape. q If PROGRAM NOT COMPLETED appears, start again at step 1. 11 Press the POWER button to turn off the TV/VCR power. The RECORD light will flash slowly if a tape is in the TV/VCR. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING
  • Philips CCA194AT | User manual - Page 37
    Timer Recording (cont'd) 37 Checking or Clearing Timer Recordings 1 With the TV/VCR on, press the COMBI button, then press the MENU button. 2 Press the PLAY/v button or the STOP/w button to select VCR PROGRAM, then press the F.FWD/B button. 3 1 Press the PLAY/v button or the STOP/w button
  • Philips CCA194AT | User manual - Page 38
    , if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper. NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04
  • Philips CCA194AT | User manual - Page 39
    Setting Up the VCR Plus+ Programming System (cont'd) 39 2 Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. You'll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do
  • Philips CCA194AT | User manual - Page 40
    below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure: q The clock has been set. If DEFEAT RECORDING is set to ON. Details are on page 33. • If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/
  • Philips CCA194AT | User manual - Page 41
    TV/VCR, PLEASE REMOVE CASSETTE also appears on the screen. If this happens, insert a different tape. 6 Turn off the TV/VCR power. The REC(ord) light will flash. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes
  • Philips CCA194AT | User manual - Page 42
    42 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 Press the STATUS/EXIT button. The real-time counter
  • Philips CCA194AT | User manual - Page 43
    Repeat Play 43 Follow the steps below to program the TV/VCR to play a tape over and over. 1 Press the COMBI button, then press the MENU button. 2-3 POWER EJECT SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press
  • Philips CCA194AT | User manual - Page 44
    44 A-B Repeat Play Follow the steps below to program the TV/VCR to play the material between two specified points (A and B) on a tape over and over again. 1 Insert a tape in the TV/VCR. 2 Press the COMBI button, then press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER
  • Philips CCA194AT | User manual - Page 45
    A-B Repeat Play (cont'd) 45 6 Press the STATUS/EXIT button to remove the menu. AB REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter. . 7-8 POWER EJECT SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL A-B REPEAT A 0:12:34 7 Play, fast forward,
  • Philips CCA194AT | User manual - Page 46
    46 Playback Options Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/B button or the REW(ind)/{ button. A fast forward or reverse picture search will begin. 2 To return to normal playback, press the PLAY/v button. Super High Speed Searching (LP/SLP) 1
  • Philips CCA194AT | User manual - Page 47
    Blue Background 47 If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to OFF. When you select a channel that is receiving a weak
  • Philips CCA194AT | User manual - Page 48
    step 5 the second time. • Tape playback will not be available on a tape if the rating of the tape is blocked. • If you enter the access code once, you may change channels without seeing the "CHANNEL XX BLOCKED" message again. If you turn off the TV/VCR power, you will be asked
  • Philips CCA194AT | User manual - Page 49
    BLOCKED..." or "PLAYBACK BLOCKED..." message appears and you want to view this programming, enter your access code. The channel will remain blocked until you enter the correct code. If you do not know the code, you will have to select another channel or press the STOP/p button. • Ratings will remain
  • Philips CCA194AT | User manual - Page 50
    Number buttons to enter your desired access code in the New Code space. Then, enter the same code in the Confirm Code space. Your new access code should be recorded. You will return to the SMARTLOCK menu. New Code _ ___ Confirm Code _ _ _ _ 6 Press the STATUS/EXIT button. 1 2,4 POWER EJECT
  • Philips CCA194AT | User manual - Page 51
    SmartLock (cont'd) 51 To check the SmartLock settings, follow these steps. 1 Press the COMBI button, then press the MENU button. > REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION PRESS B 2 Press the PLAY/v button or the STOP/w button to select 1 REVIEW. Then, press the F.FWD/B button so
  • Philips CCA194AT | User manual - Page 52
    52 Sleep Timer Use the sleep timer to program the TV/VCR to shut off in a certain amount of time. 1 Press the COMBI button, then press the SLEEP/WAKE UP button. TO ADJUST PRESS s/B -TIMER- > SLEEP OFF WAKE UP ON-TIME 1 2 Press the PLAY/o button or the STOP/p button to select SLEEP. Then,
  • Philips CCA194AT | User manual - Page 53
    Wake Up Timer 53 The Wake Up Timer turns on the TV/VCR automatically at a specified time within the next 24 hours. You may set the TV/VCR to turn on at a TV channel (the channel at which the TV/VCR was set last) or with VCR playback. To set the Wake Up Timer, follow the steps below. Before you
  • Philips CCA194AT | User manual - Page 54
    captioning is not broadcast, you cannot receive it. This does not indicate a problem with the TV/VCR. Refer to your area's TV program listings for the ). q TEXT1 and TEXT2 display half-screen text (such as a channel guide, schedule, or announcement). q OFF turns closed captions off. Captions will
  • Philips CCA194AT | User manual - Page 55
    page 28. • Abbreviations, symbols, and other grammatical shortcuts are often used in order to keep pace with the on-screen action. This does not indicate a problem with the TV/VCR. • When you change channels, the closed captions may be delayed for a few seconds. • When you adjust the volume or mute
  • Philips CCA194AT | User manual - Page 56
    to select PRIM. SETUP. Then, press the F.FWD/B button. PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v button or the STOP/w button to select VOLUME BAR, then press the F.FWD
  • Philips CCA194AT | User manual - Page 57
    , however, you may get a better picture using the manual tracking controls (see below). Manual Tracking To adjust the tracking manually, press the CHANNEL o/p buttons on the TV/VCR or the TRACKING m/n button on the remote control. Tracking returns to Automatic Tracking Adjustment when a tape
  • Philips CCA194AT | User manual - Page 58
    58 Smart Picture The Smart Picture feature allows you to improve the TV/VCR's picture when viewing sports, a movie, or video games; to improve the picture when the antenna/cable signal is weak; or to reset the picture controls to their original settings. 1 Press the SMART PICTURE button repeatedly
  • Philips CCA194AT | User manual - Page 59
    harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. YOUR REMOTE LOCATOR CODE HAS BEEN CHANGED NEW CODE IS 3 TO END PRESS EXIT 6 Press the STATUS/EXIT button. Helpful Hint • The volume will be delayed while
  • Philips CCA194AT | User manual - Page 60
    60 Reminder The channel number will remain on the screen at all times when you set REMINDER to ON. The exception is when closed captioning is selected or during tape playback. Set REMINDER to ON or OFF by following the steps below. 1 Press the COMBI button, then press the MENU button. TO ADJUST
  • Philips CCA194AT | User manual - Page 61
    This feature allows you to index the starting points of programs that you have recorded on a tape. Then, you can easily rewind or fast forward to that point. Example: If you are watching program number 4 and you want to fast forward to program number 7, skip three programs. CURRENT PLAYBACK PROGRAM
  • Philips CCA194AT | User manual - Page 62
    62 Specifications General CRT: 19-inch in line gun Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Four heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec. Operating
  • Philips CCA194AT | User manual - Page 63
    AUDIO Jack: jack located on the front of the TV/VCR which is used to record audio from another source. Automatic Channel Setup: process in which the TV/VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL o/p buttons, you only scan through
  • Philips CCA194AT | User manual - Page 64
    problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording
  • Philips CCA194AT | User manual - Page 65
    on page 28. • Make sure closed captioning is available for the program. Refer to the TV listings in your local newspa- per. Remote control does not operate TV/VCR. • Aim the remote control directly at the TV/VCR's remote sensor. Details are on pages five and 22. • Remove all obstacles between the
  • Philips CCA194AT | User manual - Page 66
    or other cause not within the control of Philips Consumer Electronics Company. • reception problems caused by signal conditions or cable or antenna local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s)
  • Philips CCA194AT | User manual - Page 67
    29 power button 22, 24 cord 7, 23 real-time counter memory . . .42 rear panel 23 rec/otr button 22, 25 record light 22 recording 30 reminder 60 remote control buttons 24-25 using 5 locator 59 sensor 22 repeat play 43 rerecording 32 rew(ind) button 22 rew(ind)/{ button . . . . . .25
  • Philips CCA194AT | User manual - Page 68
    F.FWD CLEAR 3 CH. Remote Control 4835 218 37254 Three coded for easy connection #M61103 Three Cassette Storage Cases (plastic) Fits VHS and Beta cassettes #M61104 This owner's manual is made of recyclable materials. Remember to recycle! As an ENERGY STAR® Partner, Philips Consumer Electronics
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.
Color TV with built-in VCR
CCA194AT