Philips 20PS35S User manual

Philips 20PS35S Manual

Philips 20PS35S manual content summary:

  • Philips 20PS35S | User manual - Page 1
    ! Return your Warranty Registration Card within 10 days. Read this manual first! See why inside. Congratulations on purchasing this Philips product. We've included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new
  • Philips 20PS35S | User manual - Page 2
    to the "family!" To get the most from your PHILIPS product, you must return your Warranty Registration Card within OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. t This " closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR
  • Philips 20PS35S | User manual - Page 3
    block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, the Electronic Industries Alliance: www.eiae.org 16. Damage Requiring Service - The appliance should be serviced by qualified service personnel
  • Philips 20PS35S | User manual - Page 4
    Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE
  • Philips 20PS35S | User manual - Page 5
    5 Headphone Jack 5 Monitor Output Jacks 7 AutoLock™ Controls Access Code 16 Block All Channels 18 Block Channels 17 Clear All Blocked ™ Control 24 AutoSound™ Control 25 Subject Panel No. Basic Remote Operation 3 Basic Television Operation 3 Cable/Cable Box Basic Connection
  • Philips 20PS35S | User manual - Page 6
    2 Cable Box 75Ω HELPFUL HINT Be sure to set the TV for the type signal you've connected (see the "Tuner Mode" section of this manual.) For the connection shown on this panel, choose the CABLE or AUTO option within the Tuner Mode Control. To select channels specific to your area
  • Philips 20PS35S | User manual - Page 7
    in S-VIDEO 75 ⍀ 2 HELPFUL HINT Be sure to set the TV for the type signal you've connected (see the "Tuner Mode" section of this manual.) For the connection shown on this panel, choose the ANTENNA or AUTO option within the Tuner Mode Control. To select channels specific to your area
  • Philips 20PS35S | User manual - Page 8
    3 BASIC TV AND REMOTE OPERATION 1 Press the POWER button to turn the TV ON. Note: Press any or selections. 3 Press the CHANNEL UP v or DOWN w button to select TV 1 channels. REMOTE CONTROL 4 Point the remote control toward the remote sensor window on the TV when operating the TV with the
  • Philips 20PS35S | User manual - Page 9
    BATTERIES T o load the supplied batteries into the remote: 1 Remove the battery compartment lid on the back of the remote. 2 Place the batteries (2-AA) in the remote. Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.) 3 Reattach the battery lid. Back
  • Philips 20PS35S | User manual - Page 10
    & White) 45 7 External Accessory Device (with Audio/Video Outputs) 5 Turn the camera (or accessory device) and the TV ON. 6 Press the AV button on the remote control to select the FRONT channel. FRONT appears in the upper left corner of the screen. 7 With the camera (or accessory device) ON and
  • Philips 20PS35S | User manual - Page 11
    6 REMOTE CONTROL BUTTON DESCRIPTIONS 1 - POWER button - Press the Power button to turn the TV on or off. 2 - QUADRA SURF Buttons - (Red, Green, Yellow, Blue) Store and
  • Philips 20PS35S | User manual - Page 12
    7 REMOTE CONTROL BUTTONS 2 1 5 6 3 4 7 8 9 11 10 12 13 14 VOL 15 16 17 18
  • Philips 20PS35S | User manual - Page 13
    can be adjusted, activated ro deactivated to your liking by following the screen prompts from each menu. 1 Press the MENU button on the remote control to show the onscreen menu. Main Picture Sound Features Install Brightness Color Picture Sharpness Tint More... Picture Menu Main Picture Sound
  • Philips 20PS35S | User manual - Page 14
    9 THE INSTALL MENU CONTROLS Your TV has several controls that help with the first-time setup. These controls are found in the INSTALL onscreen sub menu. 1 LANGUAGE CONTROL - This control can be set so the TV's onscreen menu reads in English or Spanish. Install Language Tuner Mode Auto Program
  • Philips 20PS35S | User manual - Page 15
    10 THE INSTALL MENU CONTROLS (CONTINUED) These controls are also found in the INSTALL onscreen sub menu. 3 AUTOPROGRAM CONTROL Your TV can set itself automatically for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (-)
  • Philips 20PS35S | User manual - Page 16
    11 THE PICTURE MENU CONTROLS T o adjust your TV picture controls, select a channel and use the Picture Menu Controls listed below: Picture 1 BRIGHTNESS CONTROL Press the CURSOR RIGHT or LEFT Brightness Color 50 buttons until darkest parts of the pic- Picture ture are as bright as you
  • Philips 20PS35S | User manual - Page 17
    12 THE PICTURE MENU CONTROLS (CONTINUED) The Picture Menu options also include two features that work invisibly to help produce the best picture quality when they are turned on. Picture Picture 1 DNR CONTROL - Press the CURSOR RIGHT or LEFT buttons to tog- Sharpness Tint gle the Dynamic
  • Philips 20PS35S | User manual - Page 18
    13 THE SOUND MENU CONTROLS Adjust your TV sound with the Sound Menu. Choose Treble Boost, Bass Boost, Balance, or AVL controls. 1 TREBLE BOOST CONTROL Press the CURSOR RIGHT or LEFT buttons to toggle this control ON or OFF. The TREBLE BOOST Control enhances high frequencies. 2 BASS BOOST CONTROL
  • Philips 20PS35S | User manual - Page 19
    14 THE TIMER MENU CONTROLS The Timer controls allow you to use your TV as an alarm clock if set to turn itself on and off at a specific time. It also can be set to tune to a specific channel at a specific time. 1 TIME CONTROL - Enter the current time with the number buttons. Use the CURSOR RIGHT
  • Philips 20PS35S | User manual - Page 20
    offers various BLOCKING controls from which to choose: Access Code - An Access Code must be set to prevent children from unblocking questionable or censored programming. Channel Block - After programming an access code, you can block individual channels (including the front A/V inputs
  • Philips 20PS35S | User manual - Page 21
    block channels and get a better understanding of the rating terms for certain programming. First, let's start by setting a personal access code: 1 Press the MENU button on the remote to display the on-screen menu. 2 Press the CURSOR UP or DOWN button until the word FEATURES is highlighted. 3 Press
  • Philips 20PS35S | User manual - Page 22
    the CH + or - button to select other channels you wish to block. Repeat step 2 to block the new channel. AutoLock Block Channel Setup Code Clear All Block All Movie Rating TV Rating OffStop Time Channel Activate Display Block Channel On Channel 12 Blocked By AutoLock Channel Blocking Access
  • Philips 20PS35S | User manual - Page 23
    to block or clear all the channels at the same time. Once your access code has been entered, the AutoLock™ features are displayed on the screen: 1 Press ALL available channels are blocked from viewing. AutoLock Block Channel Setup Code Clear All Block All Movie Rating TV Rating Clear ?Stop Time
  • Philips 20PS35S | User manual - Page 24
    UP or DOWN button to highlight the words MOVIE RATING. AutoLock Block Channel Setup Code Clear All Block All Movie Rating TV Rating G PG PG-13 R NC- ) or OFF (which allows viewing). 4 Use the CURSOR RIGHT button on the remote to turn the rating option ON or OFF. When a rating level is blocked,
  • Philips 20PS35S | User manual - Page 25
    feature blocks programming based on TV Industry ratings. Once your access code has been entered, AutoLock™ features are displayed on the screen: coarse language), or D (suggestive dialogue). 4 Press the CURSOR RIGHT button on the remote to turn the TV-Y or TV-G rating ON or OFF. Or, press the CURSOR
  • Philips 20PS35S | User manual - Page 26
    features as well. With these Blocking Options, censoring can be turned ON or OFF. Once your access code has been entered, AutoLock™ features are displayed on the screen: 1 Press the CURSOR UP or DOWN , each feature can be turned ON or OFF using the CURSOR RIGHT or LEFT buttons on the remote.
  • Philips 20PS35S | User manual - Page 27
    this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress. 1 Press the CC button on the remote to display the current Closed Caption setting. 2 Press the CC button repeatedly to choose from the four Closed Caption options (CC Off, CC 1, CC 2, CC
  • Philips 20PS35S | User manual - Page 28
    23 USING THE SLEEPTIMER CONTROL Set your TV to turn itself off automatically after a given amount of time. 1 Press the SLEEP button on the remote control and the SLEEP timer display appears on the screen. 2 Press the SLEEP button repeatedly to pick the amount of time (15, 30, 45, 60,
  • Philips 20PS35S | User manual - Page 29
    event, your TV has automatic video control settings matched for your current program source or content. 1 Press the AUTO PICTURE button on the remote control. The current Auto Picture setting is displayed on the screen. 2 Press the AUTO PICTURE button repeatedly to select either PERSONAL, MOVIES
  • Philips 20PS35S | User manual - Page 30
    ™ CONTROL T he Auto Sound feature allows you to select between four different factory set sound options. 1 Press the AUTO SOUND button on the remote control. The current Auto Sound setting appears in the middle of the screen. 2 Press the AUTO SOUND button repeatedly to toggle between the four
  • Philips 20PS35S | User manual - Page 31
    different personal channel 12 Surf lists using the colored buttons (on the remote control). Each colored button holds up to ten channels in its to add to one of the SURF lists. 2 Press the SMILEY button on the remote control to ADD the channel to one of the SURF lists. 3 Press the corresponding
  • Philips 20PS35S | User manual - Page 32
    (the four colored buttons, see the previous page), let's review how the feature works: 1 Press one of the pre-programmed COLORED buttons on the remote (Red, Green, Yellow or Blue). The screen displays a smiley face with the first programmed channel for that surf list. 2 While the colored "smiley
  • Philips 20PS35S | User manual - Page 33
    by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

Color TV
Color TV
Directions for Use
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Important!
Return your
Warranty
Registration Card
within 10 days.
See why inside.
Model No.:
Serial No.:
XXXX XXX XXXXX