Panasonic PT-DZ21K2 ET-PKD520S Installation Instructions
Panasonic PT-DZ21K2 Manual
 |
View all Panasonic PT-DZ21K2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PT-DZ21K2 manual content summary:
- Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 1
bracket in these instructions. Thank you for purchasing this Panasonic product. ■■ To customers The "Installation Instructions" is intended for give this manual to the certified personnel and have them perform the procedure. ■■ To installation personnel Read the "Installation Instructions" thoroughly - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 2
Contents Read this first!...3 Product components 4 Installation...5 Setting up the screen...5 Screws tightening torques 5 Installing the attachment plate to the ceiling 5 Installing the bracket to the projector 7 Suspending the projector...7 Adjusting the installation angle 8 Attaching the wire - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 3
. zzFollow the instructions specified in "Installation" and "Attaching the wire rope to the ceiling" of this manual, and perform secure may result from contact with any metal objects inside the ceiling. ■■ Panasonic disclaims all liability for any accidents or any damage caused by the installation - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 4
mount bracket (sold separately). ■■ Applicable projector mount bracket ET-PKD520B * Products other than the above may be supported. Refer to the installation instructions for your projector mount bracket. ■■ Structural components Check that the package contains the following parts. The number - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 5
and installing the projector. zzThe [GEOMETRY] function cannot be used when projecting images in the simultaneous format with a PT-RQ13K series DLP™ Projector. When installing a PT-RQ13K series projector to a ceiling and projecting images in the simultaneous format, obey the following to prevent - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 6
four ceiling mount bolts. (Refer to page 5 for attachment positions.) zz When installing anchoring nuts or curled plugs, strictly adhere to the installation instructions supplied by the manufacturer of the nuts so that they will not loosen in the concrete structure or be dislodged from the intended - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 7
mount bracket (sold separately). zzFor installing the projector mount bracket (sold separately) to the projector, refer to the installation instructions for the projector mount bracket. Suspending the projector Suspend the projector from the attachment plate installed to the ceiling. Screw hole - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 8
out in order to make the center of the projector lens perpendicularly to the surface of the projection screen. zzWhile referring to the operating instructions for the projector, project a picture onto the screen and then adjust the picture size and focus. After making these adjustments, adjust the - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 9
Adjusting the installation angle (continued) ■■ If the right and left edges of the picture are not parallel (vertical tilt adjustment) Adjustable span zzLoosen the four captive washer hex head bolts (two on each side) that attach the angle adjusting bracket to the attachment plate, then tilt the - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 10
assume installation on a concrete ceiling. Note zzFor attaching the wire rope to the projector, refer to the installation instructions for the separately sold projector mount bracket. Within 1 m (39-3/8") radius recommended Anchoring the nut or curled plug*1 Wire rope*2 1) Mount the - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 11
Specifications Adjustment range Panning range Vertical tilt range Horizontal tilt range ±1° 5° upward, 17° downward ±2.5° External dimensions Width: 200 mm (7-7/8") Height: 83 mm (3-9/32") Depth: 286 mm (11-1/4") Weight Approx. 2.4 kg (5.29 lbs.) * The height dimensions include the thickness - Panasonic PT-DZ21K2 | ET-PKD520S Installation Instructions - Page 12
2015 SS0715ZY1036 -PJ Printed in Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
ENGLISH
ENGLISH
TQZJ722-1
Installation Instructions
Ceiling Mount Bracket (for Low Ceilings)
Model No.
ET-PKD520S
Thank you for purchasing this Panasonic product.
■
To customers
The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified personnel to
perform the installation.
After installation, have the installation personnel return these “Installation Instructions” to you, and save it for future use.
When moving or removing the projector, give this manual to the certified personnel and have them perform the
procedure.
■
To installation personnel
Read the “Installation Instructions” thoroughly and then perform the operation correctly and safely.
Be sure to read through the section entitled “Read this first!” (page 3) before proceeding with the
installation.
After installation, return these “Installation Instructions” to the customer.
* The figure above shows a combination of this product and the separately sold ET-PKD520B projector mount bracket.
* Unless specified otherwise, the ET-PKD520B is used in the illustrations of the projector mount bracket in these instructions.