Panasonic ET-CUK10_CUK10P ET-CUK10 Operating Instructions

Operating Instructions

Auto Screen Adjustment Upgrade Kit

Model No.

ET-CUK10

Content Con

fi

rmation

KeyCode label x 1

Attention

•

Dispose of the packaging appropriately after removing from the product.

Precautions for Use

■

Computer requirements

The following is required to apply the upgrade kit onto projectors.

•

An environment that can connect to the Internet

•

Member registration with PASS (free of charge)

•

Installation of the Geometric & Setup Management Software (Geometry

Manager Pro) and the Auto Screen Adjustment plug-in software.

For details on system requirements, refer to the operating instructions for the

Geometric & Setup Management Software (Geometry Manager Pro).

■

Auto Screen Adjustment

The following are required to perform Auto Screen Adjustment.

•

Camera and camera lens (not supplied)

•

Projector connection via LAN

For details on supported projectors, cameras, and camera lenses, check the

Panasonic website (https://panasonic.net/cns/projector/pass/).

■

Downloading the software

Log into the PASS server (https://panasonic.net/cns/projector/pass/), click

[Software Download] on the top page of the member page, and follow the on-

screen instructions to download the Geometric & Setup Management Software

(Geometry Manager Pro) and Auto Screen Adjustment plug-in software.

Notes

•

Download the Auto Screen Adjustment plug-in software together with the

Geometric & Setup Management Software (Geometry Manager Pro).

•

If the Geometric & Setup Management Software (Geometry Manager Pro) is

already installed, check its version and update to the latest version if necessary.

For details on the latest version of the Geometric & Setup Management Software

(Geometry Manager Pro), check the software download page of the Panasonic

website (https://panasonic.net/cns/projector/pass/).

R

Precautions for Use (continued)

■

Software installation

Installing the Geometric & Setup Management Software (Geometry

Manager Pro)

Double-click the downloaded “Installer.exe”

fi

le, and follow the on-screen

instructions to install the application.

•

When installation is complete, a shortcut icon is created on the desktop.

Installing the Auto Screen Adjustment plug-in software

Double-click the downloaded “AusInstaller.exe”

fi

le, and follow the on-screen

instructions to install the application.

•

When installation is complete, the [AUTO ADJUST] (Auto Screen

Adjustment) button at the top right of the Geometric & Setup Management

Software (Geometry Manager Pro) main screen will be enabled.

Note

•

An error message will appear if the latest version of the Geometric & Setup

Management Software (Geometry Manager Pro) is not installed. Install the

latest version if necessary.

For details on the latest version of the Geometric & Setup Management

Software (Geometry Manager Pro), check the software download page of

the Panasonic website (https://panasonic.net/cns/projector/pass/).

■

About activating the product

Activation using the key code indicated on the key code label must be

performed to apply this upgrade kit to projectors.

Log into the PASS server (https://panasonic.net/cns/projector/pass/), click

[Activation] in the side menu on the top page of the member page, and follow

the on-screen instructions to perform activation.

Note

•

You may need to update the

fi

rmware version of the projector before

performing activation in some cases.

For details, check the information found on software download page of the

Panasonic website (https://panasonic.net/cns/projector/pass/).

Trademarks

The company names, product names or other names noted in these operating

instructions are trademarks or registered trademarks of the respective

companies. Note that ® and TM marks are not indicated in these operating

instructions.

Cautions

•

Do not use or reproduce part or all of these operating instructions without

permission.

•

The content of these operating instructions is subject to change without

noti

fi

cation in the future.

Web Site : https://panasonic.net/cns/projector/

© Panasonic Corporation 2014

Thank you for purchasing this Panasonic product.

•

Please read these instructions carefully, and save this manual for future

use.

Enables the Following

Applying this upgrade kit to a projector expands the functions of the

Geometric & Setup Management Software (Geometry Manager Pro), and

allows automatic adjustment of geometry correction, edge blending, color,

and brightness according to the shape of the screen through use of an

externally connected camera.

•

A camera (not supplied) is required to use these functions.

•

Both the Geometric & Setup Management Software (Geometry Manager

Pro) and the Auto Screen Adjustment plug-in software must be installed to

apply this upgrade kit onto projectors.

You can download the Geometric & Setup Management Software

(Geometry Manager Pro) and its operating instructions, and the Auto

Screen Adjustment plug-in software from the Panasonic website. To

download, you must be a registered PASS* member and log into the PASS

server (https://panasonic.net/cns/projector/pass/).

* PASS: Projector Asset Support System

For more information, see the Panasonic web site (https://panasonic.net/

cns/projector/pass/).

HS0414

M1047 -PS

Printed in Japan

TQBH0335-1

Panasonic ET-CUK10_CUK10P ET-CUK10 Operating Instructions

Panasonic ET-CUK10_CUK10P Manual

Panasonic ET-CUK10_CUK10P manual content summary: