Panasonic BTLS1400 BTLS1400 User Guide

Panasonic BTLS1400 - 14" LCD MONITOR Manual

Get Panasonic BTLS1400 - 14inch LCD MONITOR PDF manuals and user guides View all Panasonic BTLS1400 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic BTLS1400 manual content summary:

  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 1
    Liquid Crystal Video Monitor BT-LS1400P POWER INPUT SCAN BLUE MENU/ EXIT ENTER MENU VOLUME Before attempting to connect, operate or adjust this product, please read these instructions completely. Printed in Japan VQT0F29
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 2
    alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE , if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 3
    A VOLTAGE IN THE RANGE OF 220 - 240 V AC MAY REQUIRE THE USE OF A DIFFERENT AC PLUG. PLEASE CONTACT EITHER A LOCAL OR FOREIGN PANASONIC DISTRIBUTOR FOR ASSISTANCE IN SELECTING AN ALTERNATE AC PLUG. indicates safety information. Contents For your safety 2 Precautions for use 4 Outline drawings of
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 4
    be missing or remain permanently lighted (red, blue and/or green) in less than 0.01% of the area. This is not indicative of malfunctioning. ¥ The LCD panel has been specially finished. Do not wipe it with hard cloths or rub it heavily as this will damage the surface of the panel
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 5
    Introduction The BT-LS1400 commercial-use LCD video monitor features a 14 v-type LCD screen, a slim and lightweight design, and a wide angle of view. Its connectors support not only standard NTSC signal input but S-Video, 480i , P component signal input and SD SDI (optional) input as well. ∫ Wide
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 6
    These connectors are for component signal input and audio signal input. When the option SDI input unit BT-YA210G is installed, these connectors are also used for SDI audio input. It is recommended to the accessory power cord here. Fix the clamp to the monitor using the screw provided. 6
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 7
    the backlight brightness, status displays, input switching skip and REMOTE ON or OFF. 4 MAINTENANCE This menu is used to display the running time of the LCD monitor. 5 [INPUT] The currently selected signal-whether LINE A, LINE B, CMPNT or SDI (optional)-is displayed here. 7
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 8
    made to the settings when the LINE B signal has been selected will also be made to the LINE A signal. ≥ When the optional SDI input unit (BT-YA210G) is installed, any changes made to the settings when the CMPNT 480i signal is selected will also be made to the SDI signal. Conversely
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 9
    How to use the on-screen menus ¥ VIDEO CONFIG menu The menu items shown below appear when the VIDEO CONFIG menu is selected on the main menu. [VIDEO CONFIG] ASPECT COMPONENT LEVEL 16:9 SMPTE ASPECT An aspect ratio of 4:3 or 16:9 can be set. The underscanning function cannot be used when 16:9
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 10
    RUNNING TIME 300H RUNNING TIME The total running time of the monitor is displayed here (in hours). REMOTE specifications In order to perform CMPNT or SDI. The SDI signal input can be selected only when the BT-YA210G, available as an optional accessory, is installed. The input signals which have
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 11
    -MA1400G) are used. Refer to the following when attaching the adaptors. 1 Remove the stand from the main monitor unit. 3 Attach the BT-MA1400G rack mount adapter using the two screws which were removed in step 1 and six screws which were removed in step 2. Screws 2 Remove the six
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 12
    and wrung out thoroughly, then finish it off with a dry cloth. The monitor may malfunction if even one drop of water gets into the internals. ≥ Do not spray detergent or other cleaners directly on the monitor or LCD panel. The monitor may malfunction if even one drop of water gets into the internals
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 13
    output] LINE A: Loop-through output, L/R (RCA, phono pin) LINE B: Loop-through output, L/R (RCA, phono pin) Speakers: Stereo (1 W + 1 W) [Other] REMOTE: D-sub, 9 pin [Accessories provided with the monitor] Power cable a 1 Operating Instructions a 1 Cable clamp a 1 Screw for cable clamp a 1 13
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 14
    Memo 14
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 15
    Memo 15
  • Panasonic BTLS1400 | BTLS1400 User Guide - Page 16
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Before attempting to connect, operate or adjust this product, please read these instructions completely.
BT-LS1400
P
Liquid Crystal Video Monitor
POWER
INPUT
SCAN
BLUE
MENU/
EXIT
ENTER
MENU
VOLUME
Printed in Japan
VQT0F29