Panasonic AGMX70P AGMX70 User Guide

Panasonic AGMX70P - AV SWITCHER Manual

Get Panasonic AGMX70P - AV SWITCHER PDF manuals and user guides View all Panasonic AGMX70P manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AGMX70P manual content summary:

  • Panasonic AGMX70P | AGMX70 User Guide - Page 1
    Digital AV Mixer AG- P Before attempting to connect, operate or adjust this product, please read these instructions completely.
  • Panasonic AGMX70P | AGMX70 User Guide - Page 2
    the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. FCC Note: This device and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Panasonic AGMX70P | AGMX70 User Guide - Page 3
    two video signals to be synchronized. Its dedicated software program, the MX-Navi, enables titles to Since its downstream keys, fade controls and audio mixers can also be used, the effects required for also be provided by adding the 3D optional board (AG-VE70). ≥ Audio mixing The unit comes with four
  • Panasonic AGMX70P | AGMX70 User Guide - Page 4
    Contents AG-MX70 Overview 3 Parts and their functions 6 Front panel controls 6 Rear panel connection area 14 External interfaces 17 GPI 17 RS-422A 17 RS-232C 17 Tally 17 System diagram 18 Power supply and backup 20 Setting panel screen 20 [INTVideo] internal video setting screen ....
  • Panasonic AGMX70P | AGMX70 User Guide - Page 5
    software 74 System requirements 74 Overview of MX-Navi 74 Processing of image data 75 By data type 75 Display methods 75 DSK effects 75 Image size 75 Image formats supported 75 Management of the image memory 76 Before use 77 AG-MX70 playback properties 86 Manual transmission and playback
  • Panasonic AGMX70P | AGMX70 User Guide - Page 6
    demo mode is established after the power is turned on. The demo mode can be exited by selecting [Enter]. When the power is off, the operation panel using RS422A, and when control is disabled, settings can be performed by manual operations even during editing operations using RS-422A. When the lamp of
  • Panasonic AGMX70P | AGMX70 User Guide - Page 7
    setting, and some patterns cannot be used for the DSK effects. If DSK-Effects has been set to ON for a pattern which is not supported by DSK using a wipe pattern number, the button's lamp flashes to indicate that DSK effects cannot be applied. 4 Direct key pattern buttons These buttons are
  • Panasonic AGMX70P | AGMX70 User Guide - Page 8
    Effects]. Both still and strobe cannot be selected at the same time. Whichever one was selected last takes precedence. In the case of manual strobe, the effect is applied by pressing the button together with "Shift." 9 A/PROG bus / VIDEO EFFECTS execution button This applies the mosaic, decay
  • Panasonic AGMX70P | AGMX70 User Guide - Page 9
    Parts and their functions Setting panel area 25 1 POS. X 119 X 107 Z 235 EVENT METime Pattern INT 4 00E 02:00F 2101 Wht 8 Transition 3 DR 7 6 9 Modify : ; Pattern Edge Hard Effects Off = < Light On CONTRAST ? A SET UP INT VIDEO DSK FADE AUDIO EFFECTS @ B C D E> 1
  • Panasonic AGMX70P | AGMX70 User Guide - Page 10
    executed. 4 AUDIO FOLLOW video button This button enables the audio to be matched with the video during video ME transition or fading. Its function is supported at the ON position. ON or OFF is preset for fading on the DSK/fade setting page. 10
  • Panasonic AGMX70P | AGMX70 User Guide - Page 11
    Parts and their functions DR 12 PHONE TIME 3 7 MIN PATTERN MAX ME DSK FADE 7 8 9 4 5 6 1 2 TITLE PLAY 0 INT PLAY . 3 SHIFT CANCEL 4 5 6 8 9 : ;< = 1 PHONE (headphone volume) control This control is used to adjust the level of the rear panel headphone (PHONE) output. The sound of
  • Panasonic AGMX70P | AGMX70 User Guide - Page 12
    When it is pressed together with the shift key, the external input (EXT) is selected. < Transition lever This lever enables transitions to be performed manually. = FADE (fade execution) button This button enables fade-out into the color set on the [DSK/FADE] setting page. During execution, its lamp
  • Panasonic AGMX70P | AGMX70 User Guide - Page 13
    Parts and their functions Audio mixer area SOURCE 1 / 5 SOURCE 2 / 6 SOURCE 3 / 7 SOURCE 4 / 8 AUX 1 MAX MIC / AUX 2 MASTER MAX MIN MIN 12 3456 7 1 SOURCE 1/5 fader This fader is used to adjust the audio
  • Panasonic AGMX70P | AGMX70 User Guide - Page 14
    9 OUT connector The connectors listed above are used when the optional board (AG-YA70) has been installed. 1 MIC input connector This connector can be set connectors These are loop-through, automatically terminated connectors. They supply signals to the source VTR or camera and initiate genlock
  • Panasonic AGMX70P | AGMX70 User Guide - Page 15
    Parts and their functions 1 23 4 5 6 7 8 VIDEO IN Y/V PB/V5 PR YC Y/V PB/V6 PR YC Y/V PB/V7 PR 9 :; 1 YC 3 < 2 Y/V PB/V8 PR YC AUDIO IN =>? 4 @ 1 Composite/component Y input 1 connector 2 Composite 5/component PB input 1 connector 3 Component PR input 1 connector 4 YC input 1
  • Panasonic AGMX70P | AGMX70 User Guide - Page 16
    1 Analog audio 1 input connectors The audio signals supplied to these connectors are input to the cross point The audio signals supplied to these connectors connectors The audio signals supplied to these connectors the cross point is turned ON. AG-MX70 Example of tally connections (Max. voltage: 3.5V
  • Panasonic AGMX70P | AGMX70 User Guide - Page 17
    is performed by the RS422A/RS-232C selector switch on the rear panel. Support for the editing controller is shown below.) ≥ Connections 1) Set the cable RS-232C 25-pin 1 TXD 3 RXD 4 RTS 5 CTS 6 DSR 7 SIG.G 20 DTR AG-MX70 9-pin 1 SPARE 2 RXD 3 TXD 4 DTR 5 SIG.G 6 DSR 9 SPARE [DCE CONNECTION] Use
  • Panasonic AGMX70P | AGMX70 User Guide - Page 18
    (Video) Box camera SDI (Video) Box camera KEY (Genlock enabled as genlock source) Y, Pb, Pr SDI IN2 SDI IN3 SDI IN4 ADV-REF AG-MX70 SDI OUT Termination VTR SDI MIC (Audio/Video) Microphone Example 2 Live application (2) USB PC (with MX-Navi already installed) Signal generator CPST Y, Pb
  • Panasonic AGMX70P | AGMX70 User Guide - Page 19
    IN2 SDI IN3 SDI IN4 AUX1/AUX2 USB G/L *2 (Genlock enabled as genlock source) Signal generator AG-MX70 SDI OUT RS-422A VTR Analog audio signals CD player, etc. PC (with MX-Navi already installed the G/L loop-through signal as the sync signal supplied to the AG-A850 editing controller. 19
  • Panasonic AGMX70P | AGMX70 User Guide - Page 20
    Power supply and backup The operation panel settings are stored in the memory when the power is turned off. The default settings are established when the power is turned back on by selecting [Power] > [Reset] on the [Setup] initial setting screen, and the system is started from the settings which
  • Panasonic AGMX70P | AGMX70 User Guide - Page 21
    [INTVideo] internal video setting screen When [Back Matte] has been selected The joystick XY and rotary Z control displays are set to Wash, and the wash color that is the companion color for gradation is set. The joystick [X][Y] and rotary [Z] display change to [Pb], [Pr] and [Y], and the color
  • Panasonic AGMX70P | AGMX70 User Guide - Page 22
    of the settings, the images previously stored in the memory can be read by selecting "Memory" again but they will be cleared after the power is turned off. The playback trigger is applied using "Shift" + ".". The "Grade" setting which was set by "BackMatte" also takes effect for "Memory."
  • Panasonic AGMX70P | AGMX70 User Guide - Page 23
    [Color Effects] setting screen Color Pb 128 Pr 128 Effect C Gain 0 Event ME Time 00E 10:00F Pattern 3015 INT Blue Color Effects ch A Y Setup Y Gain Pb 0 0 Pr 128 C Gain 128 0 R1 R2 R3 R4 R5 This menu is selected using the A or B bus [Color Effects] button. If the status of the [
  • Panasonic AGMX70P | AGMX70 User Guide - Page 24
    [Video Effects] setting screen Pos. X 128 Y 128 Z 128 Event ME Time 00E 10:00F Pattern 3015 INT Blue Channel display Video Effects ch A Mosaic Size Off XY 0 Defocus Level Off 0 Mono Off Time Effects Screen Time Off Field 1 10F Decay Time Off 16 Paint Level Off 4
  • Panasonic AGMX70P | AGMX70 User Guide - Page 25
    [Video Effects] setting screen [Mosaic] setting Select [On] or [Off] for this effect using the rotary 2 control. The default setting is [Off]. Select [XY] (both horizontal and vertical), [X] (horizontal only) or [Y] (vertical only) using the rotary 3 control. Set the size using the rotary 4 control
  • Panasonic AGMX70P | AGMX70 User Guide - Page 26
    increments. Select @4 to @16 for a once-only still operation. Select R4 to R16 for repeat operations. The number denotes the number of screens. At the Manual setting, the screen can be stopped by pressing the cross point [Strobe] button with the [Shift] key. This time setting is used for the level
  • Panasonic AGMX70P | AGMX70 User Guide - Page 27
    [Video Effects] setting screen [Decay] setting The A and B multi strobe, transition, Key, DSK shadow and R1 R2 R3 R4 R5 trail cannot be selected at the same time. Only one of these effects is valid at a time. Select [On] or [Off] for the effect using the rotary 2 control. Any time setting
  • Panasonic AGMX70P | AGMX70 User Guide - Page 28
    screen [3D] setting Select [OFF], [Ripple], [Multi] or [Spark] for 3D using the rotary 2 control. This setting is only effective when the 3D optional board (AG-VE70) has been installed. It cannot be made to take effect at the same time as 3D transition or key pattern. The default setting is
  • Panasonic AGMX70P | AGMX70 User Guide - Page 29
    [Video Effects] setting screen ≥ In the case of pattern numbers 200 to 211, 1001 to 1034, 213 to 220, 222, 1060 to 1067 and 1069, transitions can be initiated with the DVE setting parameters applied to the B channel. When this is done, the pattern is changed to MIX (56). (With the A bus/B
  • Panasonic AGMX70P | AGMX70 User Guide - Page 30
    Execution of Effects AB transition 1) Preparation Slide the transition lever to the A side. 2) Input selection and preview Select the input source of the transition destination using the B bus cross point button. The preview selection can now be set as ME and the images of the transition
  • Panasonic AGMX70P | AGMX70 User Guide - Page 31
    Effect-by-effect setting screens The settings for the transition and key patterns are performed on these screens. The items that can be set differ from one pattern to another. The LCD display changes as soon as one of the patterns is selected. The key slice, slope, key level, crop, edge, effects
  • Panasonic AGMX70P | AGMX70 User Guide - Page 32
    Effect-by-effect setting screens [Pattern Edge] setting This is used to set edges for the patterns. The border color set here is used as the border matte for trail. It is updated by the color which is read out for the direct pattern. Select [Hard], [Soft], [Border] or [Soft Border] using the
  • Panasonic AGMX70P | AGMX70 User Guide - Page 33
    Shadow] or [Trail] effect using the rotary 2 control. Set the [Light] (lighting) using the rotary 5 control. This is valid only when the 3D optional board (AG-VE70) has been installed for use. ≥ When [Shadow] has been set When [Shadow] has been selected, the shadow position can be set by setting the
  • Panasonic AGMX70P | AGMX70 User Guide - Page 34
    Effect-by-effect setting screens [Chroma Key] setting The chroma key is opened directly or when selected using the number keys. ME is automatically selected for the Preview output, and the chroma key cursor and keyed output are displayed. Pos. X 128 Y 128 Z 196 Event ME Time 00E 10:00F Pattern
  • Panasonic AGMX70P | AGMX70 User Guide - Page 35
    in the same way as with the basic patterns. The default setting is [Off]. [DVE Plus] This takes effect only when the 3D optional board (AG-VE70) has been installed. It is possible to add the DVEs in key numbers 3401 to 3478, 3601 to 3623, 6001 to 6003, 6006, 6007
  • Panasonic AGMX70P | AGMX70 User Guide - Page 36
    Effect-by-effect setting screens [Luminance Key] and [EXT Key] (external key) settings The luminance key and external key are opened directly or when selected using the number keys. Pos. X 128 Y 128 Z 196 Event ME Time 00E 10:00F Pattern 3102 INT Wht Luminance Key Key Slice Crop A A 6
  • Panasonic AGMX70P | AGMX70 User Guide - Page 37
    Effect-by-effect setting screens [Title Key] setting The title key is opened directly or when selected using the number keys. It is not displayed when Page is 0. The number of frames (number of pages) that can be stored in the memory for PC Title can be set on the [Setup] screen. Pos. X 128 Y 128
  • Panasonic AGMX70P | AGMX70 User Guide - Page 38
    Effect-by-effect setting screens [Basic Pattern Key] setting (numbers 3001 to 3046) The basic pattern key is opened directly or when selected using the number keys. Pos. X 128 Y 128 Z 196 Event ME Time 00E 10:00F Pattern 3002 INT Wht Basic Pattern Key Pattern Edge Width Color K Level
  • Panasonic AGMX70P | AGMX70 User Guide - Page 39
    Effect-by-effect setting screens Other key settings (numbers 3301 and up) The pattern keys are opened directly or when selected using the number keys. The size is set using the rotary Z control. With patterns whose positions can be changed, the position can be set using the joystick. Pos' X 128 Y
  • Panasonic AGMX70P | AGMX70 User Guide - Page 40
    Effect-by-effect setting screens [3Dmodify] setting This takes effect only for the special 3D patterns (numbers 6001 to 6438 and 6601 to 6716) when the 3D optional board (AGVE70) has been installed. The parameters of the pattern for the 3D keys can be changed using the rotary 2, 3, 4 and 5
  • Panasonic AGMX70P | AGMX70 User Guide - Page 41
    Effect-by-effect setting screens ≥ With the page turn group (number 6008) R2: [Rotate] (rotation) setting R3: [Angle] setting R4: [Turn] setting R5: [Radius] setting ≥ With the ripple group (number 6031) R2: [Level] (amplitude) setting R3: [Time] setting R4: [Width] setting The position of the
  • Panasonic AGMX70P | AGMX70 User Guide - Page 42
    Effect-by-effect setting screens [Key Learn] setting This is used to set key learn. It cannot be set for number 3001 to 3006, 3301 to 3305, 6001 to 6003 and 6006 to 6010 doors. The key XYZ, key level and 3D modify settings are stored in the memory for each key frame. The key patterns are selected
  • Panasonic AGMX70P | AGMX70 User Guide - Page 43
    Effect-by-effect setting screens Pos. X 128 Y 128 Z 196 Event ME Time 00E 10:00F Pattern 3013 Key Learn 9000 Insert Replace Basic CLR KF Copy K Frame 00 Paste Exit R1 R2 R3 R4 INT Wht K Level 255 R5 In the key learn editing mode, the key frame number is displayed in [K Frame].
  • Panasonic AGMX70P | AGMX70 User Guide - Page 44
    Effect-by-effect setting screens With flag (#6002) R1 Insert Replace CLR KF Copy Paste Exit R2 R3 R4 R5 Flag K Frame 00 K Level 255 Width Angle Time Amp 192 64 48 32 R2: [Width] (flag width) setting R3: [Angle] setting R4: [Time] (fluttering time) setting R5: [Amp] (amplitude)
  • Panasonic AGMX70P | AGMX70 User Guide - Page 45
    3378 Dual PinP 3401 to 3478 2DcompMoveKey (OFF when Z is changed) 3601 to 3623 Bounce Key (OFF when Z is changed) ≥ When the 3D optional board (AG-VE70) is installed Pattern number selected 1341 to 1348 (47 to 50, 134 to 137) 1541 to 1550 (32 to 35, 130 to 133, 141
  • Panasonic AGMX70P | AGMX70 User Guide - Page 46
    page concerned is used as a group, the pages of the entire group will be cleared as well. Since the saving that is initiated by [Write] supports only the [EXT] external inputs, set [Key] and [Fill] to [EXT]. Set [Mode] to [Preview], and select [Enter] to initiate the preview display. It is
  • Panasonic AGMX70P | AGMX70 User Guide - Page 47
    DSK/Fade settings [DSK Key] settings These are used to set the DSK key signals (for external applications). Memory keys are used in their original form. The [Slice] level can be set to any value from 0 to 255 using the rotary 2 control. The default setting is 0. [Slope] can be set to any value from
  • Panasonic AGMX70P | AGMX70 User Guide - Page 48
    DSK/Fade settings [Fade] settings These are used to perform the fade settings. The image to be faded is selected from [Black], [White] or [Blue] using the rotary 2 control. The default setting is [Black]. [On] or [Off] is selected for [Audio] fading using the rotary 3 control. The default setting
  • Panasonic AGMX70P | AGMX70 User Guide - Page 49
    [Audio Effects] settings Pos. X 128 Y 128 Z 196 Event ME Time 00E 10:00F Pattern 3015 INT Wht 1 - 8 Aux1 Aux2 Audio Effects Pan IN Ch Balance Off L 0 1 EQ Low On High 0 0 EQ M Level Freq Q Mid 0 1.01KHz 0.5 Voice Change Pitch Level Off Up 5 Mute Off AB R1 R2 R3
  • Panasonic AGMX70P | AGMX70 User Guide - Page 50
    [Audio Effects] settings [EQ] equalizer setting This is used to set the equalizers. Set [On] or [Off] for all equalizers using the rotary 3 control. The default setting is [On]. The [L Level] bass level can be set in 2 dB intervals to any value from -14 dB to 0 to +14 dB using the rotary 5 control.
  • Panasonic AGMX70P | AGMX70 User Guide - Page 51
    Empty 1 Save R1 R2 R3 R4 R5 Scrolled display Select the item to be set using the rotary 1 control. Items consist of [Power], [Direct Pattern], [Audio Video], [Memory], [Gen Lock], [Video Format], [System1], [System2], [Bus], [Audio Level] and [File]. The setup settings are not returned
  • Panasonic AGMX70P | AGMX70 User Guide - Page 52
    memories have been destroyed), the system is started from the factory setting status. With [Demo], the system starts up in the demonstration mode when the power is next turned on. This menu is displayed in the demonstration mode so that when the system is restarted by selecting [Preset] or [Reset
  • Panasonic AGMX70P | AGMX70 User Guide - Page 53
    [Setup] initial setting screen The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the settings are acceptable, enter them using [Enter], and return to the direct pattern settings. Example of transition Pos. X 128 Y 128 Z 196 Event
  • Panasonic AGMX70P | AGMX70 User Guide - Page 54
    [Setup] initial setting screen [Audio Video Input] settings These are used to set the audio and video inputs. R1 R2 R3 R4 R5 When [Setup] is selected using the rotary 2 control and [Enter] is pressed, [OK?] appears so press [Enter] to change to the setting mode. Use [Shift] + [Enter] to
  • Panasonic AGMX70P | AGMX70 User Guide - Page 55
    [Setup] initial setting screen [Memory] setting This is used to set the memories used for INTVideo and R1 R2 R3 R4 R5 DSK. When the setting is changed, all the memories are Memory INT V Title cleared. How much memory is to be used for [INT V] and 15 15 how much for [Title] for DSK and
  • Panasonic AGMX70P | AGMX70 User Guide - Page 56
    1Frame Sec ME GVG signal is connected with the 3D optional board (AG-VE70) installed. If 0Frame is selected, the video delay amount is [GVG]. [System2] setting The time taken until the LCD is set to the power saving R1 R2 R3 R4 R5 mode can be selected using the rotary 2 control.
  • Panasonic AGMX70P | AGMX70 User Guide - Page 57
    selection again using [Enter] or cancel using [Shift] + [Enter]. It is also possible to clear all the settings by holding down [Shift] + [Enter] when the power is turned on so that the factory settings are restored. R1 R2 R3 Audio Alignment Level -3dB -3dB 0dB 4dB R4 R5 Head 18dB 18dB
  • Panasonic AGMX70P | AGMX70 User Guide - Page 58
    at the recall stage and then pressing [Shift] + [.]. Alternatively, this can be achieved by starting the system by pressing [Shift] + [Enter] when the power is turned on, and restoring the factory settings. Pattern settings Press the [Pattern] button, input the pattern number using the number keys
  • Panasonic AGMX70P | AGMX70 User Guide - Page 59
    Other settings Transition time setting Select the item to be set, and press the [ME], [DSK] or [FADE] button. Input the numerical value using the number keys, and press [Enter]. The numerical value can be incremented and decremented using rotary TIME or the "+" and "-" keys. Set the ME (back, key
  • Panasonic AGMX70P | AGMX70 User Guide - Page 60
    Transition patterns Basic 1 2 3 4 5 6 7 8 9 10 11 Pair 63 64 65 66 67 68 69 70 Blinds 79 80 81 82 83 84 85 86 87 88 89 Multi H3 301 302 303 304 305 306 307 308 Multi V3 321 322 323 324 325 326 327 328 Multi H6 103 Overlap 341 342 343 344 345
  • Panasonic AGMX70P | AGMX70 User Guide - Page 61
    Transition patterns Basic 12 13 14 15 16 17 18 19 20 21 22 23 Pair 71 72 73 74 75 76 77 78 Blinds 90 91 92 93 94 95 96 97 98 100 101 102 Multi H3 309 310 311 312 313 314 315 316 317 318 319 320 Multi V3 329 330 331 332 333 334 335 336 337
  • Panasonic AGMX70P | AGMX70 User Guide - Page 62
    Shutter patterns cannot be used for DSK effect. The Comp1 and Comp2 patterns can be used for DSK effect only when the 3D optional board (AG-VE70) has been installed. ≥ Pattern MIX (56) is used for DVE BPreset. ≥ With Comp2, the image at the transition destination cannot be checked using ME
  • Panasonic AGMX70P | AGMX70 User Guide - Page 63
    Transition patterns Multi PairH6 Multi PairV6 446 447 448 449 450 451 452 453 459 460 461 462 463 464 465 466 Multi HV3 471 472 473 474 475 476 477 478 Multi PairHV6 483 484 485 486 487 488 489 490 Panel Panel Panel Setting Setting 0 99 Basic2 DVE BPreset 193
  • Panasonic AGMX70P | AGMX70 User Guide - Page 64
    and 2D Move2 patterns can be used for DSK effect only when the 3D optional board (AG-VE70) has been installed. ≥ Transition patterns 1601 to 2617 can be used only when the 3D optional board (AG-VE70) has been installed. ≥ With Slide2, the image at the transition destination cannot be checked using
  • Panasonic AGMX70P | AGMX70 User Guide - Page 65
    Transition patterns Bounce Overlap +Diss 138 1321 1331 139 322 1332 140 1323 1333 2D Move2 /Exp Overlap +Diss 2D Move2 /Exp Curve2 Overlap +Diss 159 1441 1451 175 1481 1491 160 1442 1452 176 1482 1492 161 1443 1453 177 1483 1493 162 1444 1454 178 1484 1494 163 1445 1455 179 1485 1495 164
  • Panasonic AGMX70P | AGMX70 User Guide - Page 66
    and Roll and Page1, 2, 3 patterns cannot be used for DSK Effect. ≥ Transition patterns 1601 to 2617 can be used only when the 3D optional board (AG-VE70) has been installed. ≥ With Flip Tumble, the image at the transition destination cannot be checked using ME preview when the lever is at the
  • Panasonic AGMX70P | AGMX70 User Guide - Page 67
    Transition patterns Spin 2DComp +Diss Flip Tumble 1861 1871 Overlap 1964 Shutter Overlap 1971 1862 1872 1965 1972 1863 1873 1966 1973 1864 1874 1967 1974 1865 1875 1866 1876 1881 1891 1882 1892 1883 1893 1884 1894 3D DVE Ripple Spark Multi Move 1981 1982 1983 Roll +Diss 2059
  • Panasonic AGMX70P | AGMX70 User Guide - Page 68
    Title are the key patterns for which Rev can be used. ≥ Key patterns 4601 to 6716 can be used only when the 3D optional board (AG-VE70) has been installed. 68
  • Panasonic AGMX70P | AGMX70 User Guide - Page 69
    Key patterns Spot Light Back Diss Exp Exp+Diss 3305 2D Move Exp +Diss 3421 3431 2D Move2 ExpCurve2 3461 +Diss 3471 DualPinP Move +Diss 3521 3531 DualPinP Move +Diss 3561 3571 Back 3315 3325 3422 3432 3462 3472 3522 3532 3562 3572 3423 3433 3463 3473 3523 3533 3563 3573 3424 3434
  • Panasonic AGMX70P | AGMX70 User Guide - Page 70
    Effect are 6001, 6002, 6003, 6006, 6007 and 6101 to 6634. ≥ Key patterns 4601 to 6716 can be used only when the 3D optional board (AG-VE70) has been installed. 70
  • Panasonic AGMX70P | AGMX70 User Guide - Page 71
    Key patterns Pers1 2DComp 4734 +Diss 4754 PersMove1 2DComp 4769 +Diss 4789 4735 4755 4770 4790 4736 4756 4771 4791 4737 4757 4772 4792 4738 4758 4773 4793 4739 4759 Spin 2DComp 4861 +Diss 4871 Sphere 2DComp 5210 +Diss 5240 Flag1 2DComp 5413 +Diss 5473 Flag2 2DComp 5441 +
  • Panasonic AGMX70P | AGMX70 User Guide - Page 72
    Effect are 6001, 6002, 6003, 6006, 6007 and 6101 to 6634. ≥ Key patterns 4601 to 6716 can be used only when the 3D optional board (AG-VE70) has been installed. 72
  • Panasonic AGMX70P | AGMX70 User Guide - Page 73
    Key patterns Accordion Move +Diss 6221 6231 Sphere Move +Diss Sphere Curve Move +Diss 6321 6331 6421 6431 6222 6232 6322 6332 6422 6432 6223 6233 6323 6333 6423 6433 6224 6234 6324 6334 6424 6434 6225 6235 6325 6335 6425 6435 6226 6236 6326 6336 6426 6436 6227 6237 6327 6337 6427 6437
  • Panasonic AGMX70P | AGMX70 User Guide - Page 74
    used should meet the following requirements. ∫ USB driver This driver software is for communications when the AGMX70 is connected to a PC via the USB port. ∫ MX-Navi This software is for use when transmitting images from a PC to the AG-MX70 and playing them back and when reading still images from
  • Panasonic AGMX70P | AGMX70 User Guide - Page 75
    for the Monitor 1 screen differs, depending on the video format setting of the AGMX70 and the MX-Navi settings. NTSC: Monitor 1 screen = 640 a 480 and played back. ∫ Image formats supported It is possible to use the following image formats for playback with the AG-MX70. ≥ TARGA (.tga) 24 bit/pixel
  • Panasonic AGMX70P | AGMX70 User Guide - Page 76
    data ∫ Management of the image memory ≥ Memory capacity Images transmitted from the PC are stored in the AG-MX70's image memory. The memory capacity differs, depending on the AG-MX70's video format setting. NTSC: 30 pages (1 page = amount of memory required for 1 image on Monitor 1 screen) PAL
  • Panasonic AGMX70P | AGMX70 User Guide - Page 77
    installed following the same steps. ≥ Be sure to log on as a user with Administrator rights when installing this software in a PC with Windows 2000. 1) Connect the PC to the AG-MX70 correctly. 2) Turn on the power to the PC. Check that Windows has started up. 3) Place the setup CD-ROM in the PC's CD
  • Panasonic AGMX70P | AGMX70 User Guide - Page 78
    the "Next" button. ∫ For Windows XP Be sure to log on as a user with Administrator rights when installing this software. 1) Connect the PC to the AG-MX70 correctly. 2) Turn on the power to the PC. Check that Windows has started up. 3) Place the setup CD-ROM in the PC's CD-ROM drive. 4) Turn
  • Panasonic AGMX70P | AGMX70 User Guide - Page 79
    . Use the following procedure to confirm that the software has been installed correctly. 1) Confirm that the PC and the AG-MX70 have been connected correctly and that the power of the AGMX70 is switched on. 2) Select "Programs" > "Panasonic AG-MX70" > "MXNavi" from the Windows Start menu. MX-Navi
  • Panasonic AGMX70P | AGMX70 User Guide - Page 80
    Startup and shutdown How to start up MX-Navi Select "Program" > "Panasonic AG-MX70" > "MX-Navi" from the Windows Start menu. How to shut down MX-Navi Shutdown is status. Not transmitted Dark gray Transmitted Light gray Transmission not possible ...... Dark red (insufficient MX70 memory) 80
  • Panasonic AGMX70P | AGMX70 User Guide - Page 81
    Screen descriptions 4 D, F The upper line shows the Divide value for the data and the lower line shows the number of images of the data. 5 ICON The image is reduced and displayed. When several files are used with one title, one of them will be used for the display. The aspect ratio of the reduced
  • Panasonic AGMX70P | AGMX70 User Guide - Page 82
    Screen descriptions List mode 3 456 7 8 9 1 2 1 For data with a Mark setting, the Mark number is displayed. 2 This is displayed for data with the Protect setting. 7 TYPE The data playback format will be displayed. When double-clicked, the Properties window (page 86) will open. 3 O (Order)
  • Panasonic AGMX70P | AGMX70 User Guide - Page 83
    writes the data of the saved file into the flash memory of the AG-MX70. Select this menu item after turning on the power while holding down the "0" key and "5" key on the operation panel of the AG-MX70 and setting the AG-MX70 to the flash memory backup mode. A dialog box now appears so select the
  • Panasonic AGMX70P | AGMX70 User Guide - Page 84
    Menu descriptions Delete This deletes the selected title from the transmission list. The same operation can be performed with the "DEL" key or by right-clicking on the title data display column and selecting "Delete" from the pop-up menu. Select all This selects all titles in the transmission list.
  • Panasonic AGMX70P | AGMX70 User Guide - Page 85
    status of the AG-MX70" (page 90). AG-MX70 setup This displays the memory setting screen. For details, refer to "Changing the AG-MX-70 memory settings" (page 90) and "Recalling events" (page 91.) Load Title This transmits the selected data. For details, refer to "Manual transmission and playback
  • Panasonic AGMX70P | AGMX70 User Guide - Page 86
    is as follows. 1) Register the image in the list of Title data for transmission to the AG-MX70 (transmission list). 2) Perform data playback settings. 3) Play back and transmit data manually or automatically. Registering Title data in the transmission list The transmission list is a list of Title
  • Panasonic AGMX70P | AGMX70 User Guide - Page 87
    Title data operations Description of the setting items (depending on the data playback format, some items may not be displayed or setting may not be possible) Icon: Mode: On: This is used for setting the frame number of the image to be used for display in the ICON row of the main window. This is
  • Panasonic AGMX70P | AGMX70 User Guide - Page 88
    data operations Manual transmission and playback of Title data Data registered in the transmission list can be transmitted to the AG-MX70 using the to the image memory of the AG-MX70 will be cleared only by a clearing operation or when the power supply of the AG-MX70 is switched off. When space is
  • Panasonic AGMX70P | AGMX70 User Guide - Page 89
    Title data operations Checking the Title data image The image of the data selected on the image display screen can be displayed in the original size so it can be checked. The image display screen can be displayed using one of the following methods. ≥ Select "Preview" from the file menu of the main
  • Panasonic AGMX70P | AGMX70 User Guide - Page 90
    ) can be changed from the PC. 1) From the menu of the main window, select "Tools" > "AG-MX70 setup" to open the mixer setting screen. 2) Change the memory settings in the Memory column on the mixer setting screen. Signal This setting can be switched between NTSC and PAL. Aspect This setting
  • Panasonic AGMX70P | AGMX70 User Guide - Page 91
    - MX70's power has been turned on or immediately after changes have been made to the image memory settings. ≥ While transmission is in progress, the LCD display of the AG-MX70 shuts down. ≥ Before playback, INT/EXT must be selected by the AGMX70. Clearing IntVideo data The operation for deletion of
  • Panasonic AGMX70P | AGMX70 User Guide - Page 92
    Other operations Setting the initial properties The initial values for the properties to be used with new data can be set on the "Initial set of Property Data" setting screen. 1) Select "Initial set of Property Data" from the Tools menu of the main window. The "Initial set of Property Data" setting
  • Panasonic AGMX70P | AGMX70 User Guide - Page 93
    when the application is shut down. 2 Memory management The operation when the AG-MX70 is connected to the PC is set. When "Memory clear when re-connect" is checked, all Title and IntVideo data will be cleared when the AGMX70 is connected. Check "Clear the protected data" when data with the Protect
  • Panasonic AGMX70P | AGMX70 User Guide - Page 94
    List of short-cut keys Move the cursor to the top Home Select all the data Move the cursor back by 10 Left arrow Delete the selected data Move the cursor back Up arrow Cut out the selected data Move the cursor ahead Down arrow Copy the selected data Move the cursor ahead by 10 Right arrow
  • Panasonic AGMX70P | AGMX70 User Guide - Page 95
    Before calling for service Troubleshooting Contact your dealer if the problem persists even when you have checked the following items. AG-MX70-related problems Problem What to check ≥ The power can not be ≥ Is the plug of the power cable inserted properly in the outlet? switched on. ≥ Has the
  • Panasonic AGMX70P | AGMX70 User Guide - Page 96
    Before calling for service MX-Navi-related problems Problem What to check ≥ Patterns set for DSK ON abnormal. is abnormal. Even if this problem should occur, operation of this software will not be influenced. It may be possible to eliminate the problem using one of the following methods. ≥
  • Panasonic AGMX70P | AGMX70 User Guide - Page 97
    Source : 120 V AC, 50/60 Hz Power Consumption : 52 W (with no optional accessories installed), 70 W (with all optional accessories installed) indicates safety information. Operating temperature: Operating humidity: Dimensions (W k H k D): Weight: 41 °F to 104 °F (+ 5 °C
  • Panasonic AGMX70P | AGMX70 User Guide - Page 98
    Specifications [VIDEO INPUT/OUTPUT] Component input connectors: Composite input connectors: YC input connectors: EXT (external input) connector: G/L input connector: Component output connectors: Composite output connectors: YC input connectors: Preview output connector: Advanced reference input
  • Panasonic AGMX70P | AGMX70 User Guide - Page 99
    USB: D-sub 9-pin, RS-422A/232C switchable RS-422A protocol; GVG/Sony switchable Panasonic: AG-A850, AJ-A900, SONY: BVE-2000, BVE-910, PVE-500 D-sub 9-pin (channels 1/2) Embedded audio (channels 1/2) [ACCESSORIES] Power cable 1 Operating Instructions 1 MX-Navi installation CD 1 Warranty card 1
  • Panasonic AGMX70P | AGMX70 User Guide - Page 100
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Before attempting to connect, operate or adjust this product, please read these instructions completely.
AG-
P
Digital AV Mixer