Panasonic AG HVX200A P2 Camcoder

Panasonic AG HVX200A - Pro 3CCD P2/DVCPRO 1080i High Definition Camcorder Manual

Get Panasonic AG HVX200A - Pro 3CCD P2/DVCPRO 1080i High Definition Camcorder PDF manuals and user guides
UPC - 092281890883
View all Panasonic AG HVX200A manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AG HVX200A manual content summary:

  • Panasonic AG HVX200A | P2 Camcoder - Page 1
    Description Before use of parts Operating Instructions Memory Card Camera-Recorder Model No. AG-HVX200AP Shooting Playback Editing Displays Menu Reference Before operating this product, please read the instructions carefully and save this manual for future use. F0208T0 -P D Printed
  • Panasonic AG HVX200A | P2 Camcoder - Page 2
    user to the presence of important operating and maintenance (servicing) instructions USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: Do not jar, swing, or shake the unit by its handle while the conversion lens or another accessory is attached. Due to the added weight of the conversion lens Camera-
  • Panasonic AG HVX200A | P2 Camcoder - Page 3
    AG-HVX200AP Trade Name: PANASONIC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: Panasonic follow the attached installation instructions and do not make emission limit compliance, the user must use only shielded interface cables
  • Panasonic AG HVX200A | P2 Camcoder - Page 4
    camera-recorder. See the folder named \LDOC. (The description is the original (written in English).) To download the relevant source code, visit https://eww.pavc.panasonic of Leica Microsystems IRGmbH. • DICOMAR is a trademark of Leica Camera AG. • SD logo is a trademark. All other explanations,
  • Panasonic AG HVX200A | P2 Camcoder - Page 5
    on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus
  • Panasonic AG HVX200A | P2 Camcoder - Page 6
    this first 2 Before use Recommendation for Use of Genuine Panasonic Battery Pack (Rechargeable Battery 4 Software information for this product .......... 4 IMPORTANT SAFETY INSTRUCTIONS ......... 5 Outline of operations 8 Precaution for use 10 Accessories 11 About this manual 11 Description of
  • Panasonic AG HVX200A | P2 Camcoder - Page 7
    Before calling for service 120 Operating precautions 124 Updating the driver in the camera 126 Condensation 126 System resetting 127 Cleaning 127 Video Heads 128 Storage Precautions 129 How to handle data recorded on P2 cards ... 130 Checkpoints for using memory cards ...... 131 Recording
  • Panasonic AG HVX200A | P2 Camcoder - Page 8
    allows you sophisticated movie-making on this handy camera, including HD (High Definition) recording and smooth editing/dubbing. Flow of shooting, playing and saving The setting values such as the user file are saved to and read from the SD memory card. 1 P2 mode shooting and playback (Pages 25 and
  • Panasonic AG HVX200A | P2 Camcoder - Page 9
    Saving and editing on external devices Before use P2 card 4 PC mode (Page 83) The data (file) is transferred for IEEE1394 (Windows/Macintosh) Video equipment/ Television Computer/ Memory card recorder The contents can be transferred as a data stream (digital dubbing). ∗Serial Bus Protocol-2 9
  • Panasonic AG HVX200A | P2 Camcoder - Page 10
    your recordings. • Please understand that Panasonic makes no guarantees for your recordings in cases where images and/ or sound were not recorded as you intended due to problems with the camera-recorder or cassette. Respect copyrights • Copyright laws forbid the use of video and audio material you
  • Panasonic AG HVX200A | P2 Camcoder - Page 11
    menu screens, etc.) in these operating instructions differ slightly from the actual camera-recorder. References • References are shown as (Page 10). Icons Explanations specific to the media used are identified by the icons below. P2 : Explanations for P2 card usage only. TAPE : Explanations for tape
  • Panasonic AG HVX200A | P2 Camcoder - Page 12
    (Pages 29 and 30) 15 White balance sensor (Page 40) 16 INPUT 1/2 (audio input) switch (Page 53) 17 Lens hood screw (Page 18) 18 P2 card access lamp (x 2) (Page 26) 19 Viewfinder (Page 21) 20 P2 card slot (x 2) (Page 25) 21 SCENE FILE dial (Page 55) 22 Mode button (Page 25 and 29) 23 Mode
  • Panasonic AG HVX200A | P2 Camcoder - Page 13
    Description of parts Left side 1 23 4 18 AWB ZOOM SERVO MANUAL 8 10 12 14 16 5 6 7 9 11 13 15 17 ) 13 WHITE BAL switch (Page 40) 14 DISP/MODE CHK button (Page 44) 15 USER button (Page 45) 16 AUTO/MANUAL switch (Pages 25 and 29) 17 LCD monitor (Page 22) 18 Diopter adjustment dial (Page
  • Panasonic AG HVX200A | P2 Camcoder - Page 14
    shoe (Page 77) 3 USB terminal (Mini-B) (Pages 78 and 83) 4 Headphone jack (3.5 mm stereo mini jack) (Page 77) 5 1394 terminal (Page 78) 6 SD memory card slot (Pages 32 and 57) 7 CAM REMOTE jack∗ FOCUS/IRIS (3.5 mm mini jack) You can connect a remote control unit to control the FOCUS and IRIS
  • Panasonic AG HVX200A | P2 Camcoder - Page 15
    VCR mode 7 PLAY button ( ) (Page 63) 8 /REW button ( ) (Page 63) 9 PAUSE button ( ) (Page 63) Like the operation buttons of the camera, MENU operations are performed using SET button. 10 STILL ADV button ( , ) (Page 74) 11 INDEX buttons ( , ) (Page 76) 12 STOP button ( ) (Page 63) 13 FF
  • Panasonic AG HVX200A | P2 Camcoder - Page 16
    above are approximate for when scenes are shot in the DVCPRO HD mode on a P2 card while using the viewfinder. • The times apply when the ambient operating battery becomes hot while it is being used or charged. The camera-recorder itself also becomes hot during use. • The recordable time reduces if
  • Panasonic AG HVX200A | P2 Camcoder - Page 17
    . 2 Remove the battery while pressing the battery release button. • Support the battery with your hand to ensure that it will not fall power outlet. • You cannot charge the battery when supplying power to the camera-recorder from the AC adapter. DC cord's battery connector CAUTION: • This used. 17
  • Panasonic AG HVX200A | P2 Camcoder - Page 18
    the shoulder strap and use it as a precaution against dropping the camera. 20 mm or more 20 mm or more Detaching and attaching the lens hood Detaching the lens hood • Loosen the screw and turn the lens hood counterclockwise to detach it. Attaching the lens hood • Turn the lens hood clockwise and
  • Panasonic AG HVX200A | P2 Camcoder - Page 19
    's remote control sensor, the battery has run out. • Keep the battery out of the reach of children. Remote control setup When using two camera-recorders simultaneously, set this camera-recorder and the remote control to either [VCR1] or [VCR2] so the remote control does not operate the wrong
  • Panasonic AG HVX200A | P2 Camcoder - Page 20
    OTHER FUNCTIONS screen. (Page 116) When the camera-recorder is in any of the following states, tape is reached (4 blinks/ sec.) • When trouble occurs regarding tape running systems (4 blinks/sec.) • the P2 card or tape or the battery power is low (1 blink/ sec.) • When removing the P2 card during
  • Panasonic AG HVX200A | P2 Camcoder - Page 21
    This camera has two viewfinders; one is a miniature LCD in the viewfinder and the other is a retractable 3.5-inch LCD. Use the viewfinder eye cup after attaching it may cause the eye cup holder to come off. If the eyecup holder does come off, see "Cleaning the Viewfinder" (page 127) for details on
  • Panasonic AG HVX200A | P2 Camcoder - Page 22
    the LCD monitor where it is easiest to see. • The monitor can be rotated 180° toward the lens and 90° toward you. • Do not apply unnecessary force to the open LCD. This can damage the camera. Press EVF DTL again to return to the original display. "EVF DTL OFF" appears on the
  • Panasonic AG HVX200A | P2 Camcoder - Page 23
    . SET Operation button MENU • For menu operation (Page 97) • You can also use the menu buttons on the remote control. (Page 15) 3 Viewfinder adjustments Set YES SETUP screen to ON. • The viewfinder display can be in color or black and white. (See the setup menus, DISPLAY SETUP screen, EVF COLOR.)
  • Panasonic AG HVX200A | P2 Camcoder - Page 24
    . 9 Press MENU three times to exit the menus. • The clock can vary in accuracy so check that the time is correct before shooting. • When using the camera overseas, do not set the CLOCK SET option to the current time, but instead enter the time difference from Greenwich mean time according to TIME
  • Panasonic AG HVX200A | P2 Camcoder - Page 25
    POWER switch to start shooting. • Press again to return to the camera to the shooting standby mode. • Use the handle START/STOP button to make it easier to shoot from low angles. 2 LCD side AUTO MANUAL Handle START/STOP button P2 TAPE Do not operate the MEDIA switch when the power is switched
  • Panasonic AG HVX200A | P2 Camcoder - Page 26
    mode. The HD recording(720P/60P) settings are already made in the default mode. (To view the current settings, see page 44.) P2 card access lamp Protecting against a possible erasure Switch the write-protect switch of the P2 card to [PROTECT]. P2 card access lamps CAMERA mode (MCR) Lights
  • Panasonic AG HVX200A | P2 Camcoder - Page 27
    formats are not included in the DVCPRO HD recording format. • When using any other types of cards, the driver installed in the camera-recorder may need to be updated. (Page 126) • For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the following Web
  • Panasonic AG HVX200A | P2 Camcoder - Page 28
    and repair them. (For details on repairing clips, see page 70.) • During recording, a P2 card inserted cards or stopping operation before ejecting the cards. • If a P2 card is ejected while thumbnails are displayed, the thumbnail screen is released. Cautions in using P2 cards Before using a P2 card
  • Panasonic AG HVX200A | P2 Camcoder - Page 29
    POWER switch to start shooting. • Press again to return to the camera to the shooting standby mode. • Use the handle START/STOP button to make it easier to shoot from low angles. 2 LCD side AUTO MANUAL Handle START/STOP button 1 P2 TAPE 4 5 PUSH PUSH Do not operate the MEDIA switch when the
  • Panasonic AG HVX200A | P2 Camcoder - Page 30
    you shot play, and then the camera returns to the shooting pause mode. • The REC CHECK function cannot be used unless the recording is at least holder will not open if the camera is not supplied with power (AC adapter or battery). • A tape cannot be ejected in P2 mode or during recording in TAPE
  • Panasonic AG HVX200A | P2 Camcoder - Page 31
    mode. • During slow motion or still-picture playback • When using the camera's search functions Audio dubbing cannot be performed in the LP mode as P2. • Do not try to insert or eject the tape by just holding the cassette cover. • Insert and remove cassette tapes after putting the camera-
  • Panasonic AG HVX200A | P2 Camcoder - Page 32
    16 GB): 4 GB 8 GB 16 GB For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the following Web sites. https://eww.pavc.panasonic.co.jp/pro-av/ • SD memory cards must not be used or stored in an environment where they may be Exposed to high temperatures
  • Panasonic AG HVX200A | P2 Camcoder - Page 33
    Zoom button Zoom ring Set the ZOOM switch to MANU so that you can use the zoom ring. • You cannot use the zoom ring if the ZOOM switch is set to SERVO. Trying to use it could damage the camera. Zoom ring On the remote control Press ZOOM/VOL to zoom with the motor
  • Panasonic AG HVX200A | P2 Camcoder - Page 34
    or 60P mode (standard recording). As with Panasonic's Varicam model (AJ-HDC27 series), this unit also provides a recording format that allows frame rate conversion using nonlinear editing. (Either the 30P or 24P mode must be set for this.) 24PN mode: The camera-recorder shoots in the 24 fps native
  • Panasonic AG HVX200A | P2 Camcoder - Page 35
    that supports 24P over 60P) format. 1 Using the REC FORMAT (P2) function (page 107) on the RECORDING SETUP screen, select 720P/60P, 720P/30P or 720P/24P as the recording format. 2 Select the appropriate scene file using the SCENE FILE dial. If necessary, before doing this, perform the camera
  • Panasonic AG HVX200A | P2 Camcoder - Page 36
    P2 Using variable frame rates (VFR) Standard speed shooting for movie production When making movies to show on a screen, a frame rate of 24 fps (frames per second), which is the same as for films, is the norm (1x speed). If you use you have shot scenes using the 24P recording format for specifying
  • Panasonic AG HVX200A | P2 Camcoder - Page 37
    50 (OFF) or 1/60 for best results. • There may be a slight delay to the start of recording when you use the 24P or 24P advanced modes because 5 frames are recorded at a time. When using a tape, the shortest possible recording time is three seconds. 60 i AoAeBoBeBoCeCoDeDoDeEoEeFoFe Fo Ge GoHe Ho He
  • Panasonic AG HVX200A | P2 Camcoder - Page 38
    switch PUSH AUTO button AUTO/MANUAL switch Switching to manual mode If the camera is in auto mode, use the AUTO/ MANUAL switch to switch to manual mode ( on the viewfinder and LCD goes out). Manual focusing 1 Use the AUTO/MANUAL switch to switch to manual mode. 2 Use the FOCUS switch to choose
  • Panasonic AG HVX200A | P2 Camcoder - Page 39
    IRIS dial Iris adjustments 1 If the camera is in auto mode, use the AUTO/ MANUAL switch to switch to manual mode. (Page 38) 2 Press the IRIS button to switch how to adjust the aperture of lens. AUTO IRIS: Adjust the iris automatically. MANUAL IRIS: Adjust the iris manually. 3 Turn the IRIS dial to
  • Panasonic AG HVX200A | P2 Camcoder - Page 40
    AWB Ach ACTIVE Message after adjustment AWB Ach OK WHITE BAL switch AWB button White balance adjustments 1 If the camera is in auto mode, use the AUTO/ MANUAL switch to switch to manual mode. (Page 38) 2 Set the shutter speed. (Page 51) 3 Place a white pattern in a location with the same lighting
  • Panasonic AG HVX200A | P2 Camcoder - Page 41
    tones of the entire screen will also be downgraded. It is not normally necessary to adjust the black balance. Adjust it when: • You use the camera for the first time. • You use the camera after not using it for a long time. • The ambient temperature changes greatly. • You switch to the normal (OFF
  • Panasonic AG HVX200A | P2 Camcoder - Page 42
    Shooting techniques for different targets Low-angle shooting Use the START/STOP button on the handle to make it easier to shoot from low angles. START/STOP button Self-portrait shooting Images in the
  • Panasonic AG HVX200A | P2 Camcoder - Page 43
    Zebra pattern Press the ZEBRA button in the camera mode to show the zebra pattern or marker Reflecting parts You can remove most overexposed parts by adjusting the iris and shutter speed in the manual mode to remove the areas with zebra patterns. The display changes as follows each time you press
  • Panasonic AG HVX200A | P2 Camcoder - Page 44
    you record. Select the aspect ratio in the setup menus, CAMERA SETUP screen, ASPECT CONV. (Page 103) • For menu a list of functions allocated to the USER buttons, will be displayed. When you release LETTER BOX: Recorded in the 16:9 aspect ratio. Black bands are recorded at the top and bottom of
  • Panasonic AG HVX200A | P2 Camcoder - Page 45
    camera shake when shooting by hand. Press the OIS button to turn the function on and off. appears on the screen when this function is on. Turn the function off when using fade out to black. Audio also Using the USER buttons You can allocate one of twelve features to each of the three USER buttons. Use
  • Panasonic AG HVX200A | P2 Camcoder - Page 46
    the menu item settings before you operate the camera-recorder. • If you use another AG-HVX200AP/AG-HVX200 as the external unit for backup recording, are recorded even when you perform a rec check if a P2 card is being used: When a tape is used, no images are output during rec check. • You cannot
  • Panasonic AG HVX200A | P2 Camcoder - Page 47
    USER button under USER (page 105) on the SW MODE screen, you can switch the slot with the card on which data is to be written using a one-touch operation. • You cannot change slots while recording so do this during recording standby. • Does not support latest updated version of P2 Viewer to edit the
  • Panasonic AG HVX200A | P2 Camcoder - Page 48
    you are looking for. The camera returns to shooting standby mode. recording When you press the USER button to which the INDEX/MEMO Using the special recording functions P2 When recording to a P2 card is used to record pictures and sound starting at a fixed time (approx. 3 seconds for HD recording
  • Panasonic AG HVX200A | P2 Camcoder - Page 49
    after switching from the MCR mode to CAMERA mode, immediately after turning on the camera-recorder's power or immediately after changing the one of the inserted cards is DIR ENTRY NG CARD. (Page 94) • After interval recording has started, a recordable P2 card cannot be used even if it is
  • Panasonic AG HVX200A | P2 Camcoder - Page 50
    ) • When continuous one-shot recording is performed, there may be delays in acknowledging the recording operation. • After one-shot recording has started, a recordable P2 card cannot be used even if it is inserted into an empty slot. • The slots for recording in this mode are indicated by the orange
  • Panasonic AG HVX200A | P2 Camcoder - Page 51
    it is recommended that the unit be secured to a tripod, etc. for use. 1 Press the SHUTTER button. Each time you press the SHUTTER button, Standard (OFF) SYNCRO SCAN 1/100 1/120 1/60 1/2000 All other formats (30P, 24P, 24PA) Standard (OFF) SYNCRO SCAN 1/30(1/24) 1/60 1/50 1/1000 1/250
  • Panasonic AG HVX200A | P2 Camcoder - Page 52
    . Progressive mode OFF (60i) 30P 24P/24PA/24PN Shutter speed 50 Hz 60 Set the shutter speed of the synchro scan (used when shooting a television or computer monitor) in you can also shoot PAL system television screens. equivalent to the shutter speed of a film camera, and a wider angle results in a
  • Panasonic AG HVX200A | P2 Camcoder - Page 53
    external microphones or audio equipment connected to camera. (See table below) CH1∗ CH2∗∗ P2 cards and the DVCPRO HD or DVCPRO50 format are used: The recording mode is fixed at 4-channel recording. When P2 cards and the DVCPRO25 or DV format are used: Either 2 or 4 channels can be selected using
  • Panasonic AG HVX200A | P2 Camcoder - Page 54
    +48V. You can damage such equipment if you leave the setting at ON. 4 Use the CH1 SELECT switch to select the input signal to be recorded to audio channel to shooting. • For P2 mode recording, the recording level is set higher than for Panasonic's broadcast-use camera recorders (AJ series). 54
  • Panasonic AG HVX200A | P2 Camcoder - Page 55
    these settings, set the camerarecorder to recording standby state. When the camera-recorder is shipped from the factory, the following files are stored. remains unchanged even when the scene file is changed. It must be set using the REC FORMAT option on the RECORDING SETUP screen. (Page 107)) F6:
  • Panasonic AG HVX200A | P2 Camcoder - Page 56
    scene files (continued) 6 The screen below is displayed, so set the file name of six letters using , , or button. Set the same as user information. (Page 61) • Characters that can be set Space, A to Z, 0 to 9 If the COUNTER RESET button is pressed when the filename has been set, the
  • Panasonic AG HVX200A | P2 Camcoder - Page 57
    the P2 position. (Pages 25 and 32) If you have saved a scene file 1 Set the unit's POWER switch to ON. 2 Select SCENE FILE on the setting menu CARD FUNCTIONS screen, select YES, and press the (or ) button. For all other settings, select USER FILE. • For menu operations (Page 97) • You can also use
  • Panasonic AG HVX200A | P2 Camcoder - Page 58
    card You will need the latest updated version of P2 Viewer. Download it from the URL address given below, and install it in the computer. https://eww.pavc.panasonic AG-HVX200", appears for the MODEL NAME. 58 P2 as the USER CLIP NAME. The USER CLIP been edited using a viewer other than the P2 Viewer.
  • Panasonic AG HVX200A | P2 Camcoder - Page 59
    Using the Counter Counter display (P2 card / Tape) You can display a counter that indicates how much time has elapsed during shooting or playback. 1 Press the COUNTER button. Each time you press the button, the display changes as follows. (Page 91) 0 : 00. 00 Counter value In the P2 mode, the
  • Panasonic AG HVX200A | P2 Camcoder - Page 60
    . (Page 17) • Leave the POWER switch at OFF. 2 Leave the camera-recorder like this for about 4 hours. • The internal battery charges during this FIRST REC TC, select PRESET. • For menu operation (Page 97) • You can also use the menu buttons on the remote control. (Page 15) If " " appears even after
  • Panasonic AG HVX200A | P2 Camcoder - Page 61
    RESET TITLE ZOOM MULTI/ P-IN-P REC A.DUB /REW PLAY FF/ Camera or Remote control 6 Press the MENU button when you have finished setting 24P 5-frame increments 24 720P/24PN - Adjustable in 4-frame increments 720P/30PN - Adjustable in 2-frame increments Setting user information Setting user
  • Panasonic AG HVX200A | P2 Camcoder - Page 62
    setup menus, RECORDING SETUP screen UB MODE, select USER. • For menu operation (Page 97) • You can also use the menu buttons on the remote control. (Page ZOOM MULTI/ P-IN-P REC A.DUB - VOL + /REW PLAY FF/ Camera or Remote control 4 Press the button to select YES, and press the button.
  • Panasonic AG HVX200A | P2 Camcoder - Page 63
    Playback Basic playback operations (P2 card) P2 1 Before turning the POWER switch to ON 2 Set the MEDIA switch to the P2 position. Lock release 2 Turn the POWER switch to ON. While pressing the lock release, turn the POWER switch to ON. 3 CAMERA MCR VCR 1 3 Press the mode button so the
  • Panasonic AG HVX200A | P2 Camcoder - Page 64
    (Tape) TAPE 2 Lock release 3 CAMERA MCR VCR PC DUB 1 P2 TAPE 1 Before turning the POWER switch the mode changes as below. VCR CAMERA When you press the mode button while VCR is selected, the unit enters the DUB (dubbing) mode. (Page 87) Operations using the OPERATION button Play ( )
  • Panasonic AG HVX200A | P2 Camcoder - Page 65
    take some time for them to be displayed on the screen.) You can perform the following operations using the thumbnail screen. • Play, repair and delete clips as well as add and delete shot marks. • Format P2 cards and SD memory cards. • Load the metadata (shooting information, etc.) from SD memory
  • Panasonic AG HVX200A | P2 Camcoder - Page 66
    menu to the format 6 below. (Page 107) • Clips on the playlist which have been edited and copied using the AJ-SPD850 memory card recorder or other such unit and which have more than one format (DV, DVCPRO or DVCPRO50) are shown in red, and these clips cannot be played back even when the REC
  • Panasonic AG HVX200A | P2 Camcoder - Page 67
    clip to which you will add a shot mark. 2 Press the USER button to which the shot mark function has been allocated. (Page you cannot set or release shot marks unless all the P2 cards that make up the video data are inserted into the camera mode will be automatically activated, and shooting will start
  • Panasonic AG HVX200A | P2 Camcoder - Page 68
    . (Page 65) 2 Select THUMBNAIL using the and button, and press the (or ) button. 3 Select the desired item using the and buttons, and press the menu, and select OPERATION-DELETE. SLOT CLIPS: The clips on the P2 card in the specified slot are displayed. SETUP: Various setup operations are performed
  • Panasonic AG HVX200A | P2 Camcoder - Page 69
    Select the desired setting item using the and buttons, and press proxy indicator is to be displayed (ON/OFF). DATA DISPLAY: Select the time code (TC), user information (UB), shooting time (TIME), shooting date (DATE) or shooting date (DATE TIME) for button to release the menu mode. P2 69 Playback
  • Panasonic AG HVX200A | P2 Camcoder - Page 70
    this happens, "!" can sometimes be released by downloading the latest version of the P2 viewer from the web site given below, installing it in your computer, and copying the clips again. https://eww.pavc.panasonic.co.jp/pro-av/ 3 Select the desired item using the and buttons, and press the button
  • Panasonic AG HVX200A | P2 Camcoder - Page 71
    P2 card memory capacity. After selecting P2 CARD CAP, select REMAIN (remaining memory) or USED (memory used), and press the button. SYSTEM INFO: The version of the system in this camera P2 card is writeprotected) CLIP NAME: Clip name START TC: Time code value when recording started START UB: User
  • Panasonic AG HVX200A | P2 Camcoder - Page 72
    of memory remaining on the P2 card is displayed using a percentage bar. The following displays may appear, depending on the card status. FORMAT ERROR: An unformatted P2 card has been inserted. NOT SUPPORTED: A card not supported by the unit has been inserted. NO CARD: A card has not been inserted
  • Panasonic AG HVX200A | P2 Camcoder - Page 73
    whether to record the metadata on the P2 card Initializing the metadata inside the unit Displaying using the and button, and press the (or ) button. 3 Select the item using the and buttons, and press the button. USER CLIP NAME LOAD: Select this to load the metadata recorded on the SD memory card
  • Panasonic AG HVX200A | P2 Camcoder - Page 74
    On the remote control, press the [ ] or [ ] button. • When a P2 card is used, the playback speed increases as follows each time you press the button; 1/5x, 1x, . /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX Camera or Remote control Press the button to return to normal playback. -V
  • Panasonic AG HVX200A | P2 Camcoder - Page 75
    MON/VAR /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX Camera or Remote control Press the button to return to normal playback. Clip skip (P2 card) 1 During playback, press the button to pause the camera. 2 Press the button. (backward) or (forward) End search (Tape) You can find
  • Panasonic AG HVX200A | P2 Camcoder - Page 76
    -up. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX Viewing images on a television (P2 card / Tape) You can view the images on a television if you connect the unit to a TV set using an AV cable (not included), S-video cable (not included) or component video cable (included). 1 Connect the
  • Panasonic AG HVX200A | P2 Camcoder - Page 77
    when the headphones are connected. External microphone Stereo Microphone (optional) AG-MC200G INPUT1 or INPUT2 Microphone holder Microphone holder adapter 12 mm • When attaching an external microphone to the microphone shoe, use the supplied microphone holder and microphone holder adapter. • When
  • Panasonic AG HVX200A | P2 Camcoder - Page 78
    the camera-recorder. • As considerations have been made for compatibility with the AG-HVX200, the series name of the unit, "AG-HVX200", will volume among volumes of the X.X GB Panasonic disc, and click "Mount." • When the P2 card access lamp is off Eject the P2 card, and insert it again. If the unit
  • Panasonic AG HVX200A | P2 Camcoder - Page 79
    power of the units. • Before proceeding to connect the unit which uses a 6-pin type 1394 connector, carefully check the shape of the locks. Ferrite core (provided) Digital video equipment (Dubbing) This camera Other Digital video equipment 1 1394 2 1394 cable (optional) manually. 79
  • Panasonic AG HVX200A | P2 Camcoder - Page 80
    connected concurrently, the COMPONENT OUT connectors take priority. Signals cannot be output through both sets of connectors at the same time. • When connecting the camera to another device using the component video cable, if the terminal on the device to which it is to be connected is a BNC type
  • Panasonic AG HVX200A | P2 Camcoder - Page 81
    after audio dubbing has been performed. 48K(16bit): The sound is recorded using the 16-bit/48kHz (high-quality stereo) system. When audio dubbing is . 3 Start shooting. 4 Press the mode button to switch to the VCR mode. CAMERA MCR VCR PC DUB 5 In the setup menus, select an audio recording system in
  • Panasonic AG HVX200A | P2 Camcoder - Page 82
    DUB INPUT item on the AV IN/OUT SETUP screen. (Page 112) TAPE Using the memory stop mode to edit dubbed sound (1) First reset the counter memory where the counter memory display was reset. Adjusting the audio input level Use the AUDIO control to adjust the recording level of audio signals input
  • Panasonic AG HVX200A | P2 Camcoder - Page 83
    the 1394 cable is to be used to make the connection. • Your computer must run Apple MacOSX 10.3 or later. • Your computer must support 1394.a (SBP2 protocol). • Operation is not guaranteed in Windows operating systems. • The series name of the unit, "AG-HVX200", should appear on the computer screen
  • Panasonic AG HVX200A | P2 Camcoder - Page 84
    DISCONNECT is displayed, you cannot operate the camera.) 6 Proceed with nonlinear editing using your computer. An icon for the P2 card contents appears as a removable disk in My Computer of your computer. • For further details, refer to the instructions for your computer's editing software. • When
  • Panasonic AG HVX200A | P2 Camcoder - Page 85
    connect the camera to two or more HDD (chain, hub, etc.), even if they are not turned ON. • Insert the P2 card into the unit, and set the MEDIA switch to the P2 position. (Page 25) 1 First turn on the power of the HDD (1394. a SBP2 supported) to be connected, and connect it using the IEEE1394
  • Panasonic AG HVX200A | P2 Camcoder - Page 86
    To view details of the items, select an item using the and buttons, and press the button. • It is recommended that you first restore any defective clips contained in the P2 card before copying the data. • In order to avoid the occurrence of trouble in copying, formatting or other operations, it is
  • Panasonic AG HVX200A | P2 Camcoder - Page 87
    use the MENU button to open the menu. 2) Select DUBBING SETUP and then PULLDOWN SEL. Select 24P or 24PA. 24P: 2:3 pulldown 24PA: 2:3:3:2 pulldown 3) Use first valid clip (indicated by the black number) on the thumbnail display. Editing PC DUB The clips on the P2 card appear as thumbnails on the LCD
  • Panasonic AG HVX200A | P2 Camcoder - Page 88
    to pause playback. REC Camera COUNTER RESET TITLE ZOOM MULTI 1080i/24P, 720P/24P or 720P USER button information will be displayed when the DISP/MODE CHK button is held down. Digital input/output (P2 card/Tape) You can perform dubbing with a high image quality by means of digital signals by using
  • Panasonic AG HVX200A | P2 Camcoder - Page 89
    video deck. • Use the MEDIA switch to select the P2 card or tape ahead of time. (Pages 25 and 29) 1 Connect the video recording device to the unit. (Page 80) 2 Press the mode button to switch to the MCR/VCR mode. CAMERA screen. Time code and user information may not be correctly
  • Panasonic AG HVX200A | P2 Camcoder - Page 90
    to switch to the MCR/VCR mode. CAMERA TAPE Analog/digital (AD) conversion (VCR mode only) You can use this unit to convert analog to digital audio level. • Analog signals cannot be input in the P2 mode. Analog signals This camera-recorder Digital signals Other digital video unit • Normally, set
  • Panasonic AG HVX200A | P2 Camcoder - Page 91
    When user information could not be read correctly from the P2 card or the tape, [UB∗] is displayed. FR: Frame rate information for recording FR 60I : Standard (60i interlace) mode (60 fields/sec.) FR 60P : 60P progressive mode (60 frames/ sec.) FR 30P : 30P progressive mode (30 frames/ sec.) FR 24P
  • Panasonic AG HVX200A | P2 Camcoder - Page 92
    other than recording or recording standby. 5 Recording format (P2 card) (Page 107)/ recording time (tape) display 6 1394TC auto black balance • Warning (Page 94) • The functions allocated to the USER buttons during playback when ON was selected under CAMERA DATA of the setting menu DISPLAY SETUP
  • Panasonic AG HVX200A | P2 Camcoder - Page 93
    focus mode, AF appears. In the manual focus mode, MF appears. When the display is set to macro control, the black and white of AF or MF are CAMERA DATA option on the setting menu DISPLAY SETUP screen is set to ON, the value of the gain used during shooting is also displayed during playback using
  • Panasonic AG HVX200A | P2 Camcoder - Page 94
    . INCOMPATIBLE CARD The card cannot be used since it does not comply with the specified standard. RUN DOWN CARD The end of the P2 card service life has clips. CANNOT FORMAT Cannot format P2 cards or SD memory cards. CANNOT REPAIR Cannot repair clips. CARD FULL The P2 card does not have enough free
  • Panasonic AG HVX200A | P2 Camcoder - Page 95
    (Trouble has occurred in the P2 card found in the slot indicated by the number.) • If the warning continues, turn off the power. • If the warning appears even when recording is carried out again, replace the card with another one. ERROR (other type of trouble) WARNING When trouble occurs with camera
  • Panasonic AG HVX200A | P2 Camcoder - Page 96
    or by configuring OTHER DISPLAY of the DISPLAY SETUP screen of the setup menus. (Page 114) Displays 1 Time code display 3 AUTO/MANUAL switch operation display 5 Recording format/recording time display 7 Information display 8 Squeeze information display 9 Microphone level auto-control display 12
  • Panasonic AG HVX200A | P2 Camcoder - Page 97
    playback or recording mode, press the MENU button. The following is displayed on the viewfinder and LCD screen. CAMERA mode (Example) 5 Press the button to make the setting. To change a number, use the and buttons to change the setting value. Example: MCR/VCR mode (Example) (Continued on the next
  • Panasonic AG HVX200A | P2 Camcoder - Page 98
    Using the setup menus (continued) 6 To change other settings, repeat steps 4 and 5. When the menu settings The menu settings contain both the user file settings and the scene file settings. You can initialize them separately. To initialize the user file (i.e. all the settings other than the scene
  • Panasonic AG HVX200A | P2 Camcoder - Page 99
    menu structure Camera mode menu P2 TAPE indicates the available setting in P2 mode only or TAPE mode only. CAMERA MENU SCENE FILE (Pages 101 - 103) CAMERA SETUP ( DISPLAY ASPECT EVF COLOR SCENE FILE P2 USER FILE P2 SD CARD FORMAT P2 OPERATION TYPE FRAME RATE P2 SYNCRO SCAN DETAIL LEVEL V DETAIL
  • Panasonic AG HVX200A | P2 Camcoder - Page 100
    OUT OSD DATE/TIME LEVEL METER CARD/TAPE BATT OTHER DISPLAY CAMERA DATA LCD BACKLIGHT LCD SET EVF SET EVF MODE DISPLAY ASPECT EVF COLOR REMOTE END SEARCH TAPE PC MODE P2 ACCESS LED P2 CLOCK SET TIME ZONE USER FILE HOUR METER TAPE OPERATION P2 1394 STATUS 1394 CONFIG P2 Dubbing mode menu This screen
  • Panasonic AG HVX200A | P2 Camcoder - Page 101
    P2 TAPE CHROMA LEVEL P2 TAPE CHROMA PHASE P2 TAPE COLOR TEMP P2 TAPE MASTER PED P2 TAPE A. IRIS LEVEL P2 TAPE NEWS GAMMA P2 TAPE Display mode Description of settings (Camera) Switches the shutter and frame rate operation to the video type or film type. VIDEO CAM: SYNCRO SCAN is displayed using
  • Panasonic AG HVX200A | P2 Camcoder - Page 102
    SCENE FILE screen (continued) Item GAMMA P2 TAPE KNEE P2 TAPE MATRIX P2 TAPE Display mode Description of settings (Camera) Selects the gamma curves other than the news gamma curve. HD NORM: This gamma setting is suitable for HD shooting. LOW: Makes a mellow image using the gamma curve which has
  • Panasonic AG HVX200A | P2 Camcoder - Page 103
    cannot be selected when the 1080i or 720P recording format is used. (Page 44) NORMAL LETTER BOX SQUEEZE (Camera) Switch the setup level of video signals in 480i format using a P2 card. 0%: Setup is switched to 0% for both the camera output and the recording. 7.5%A: Setup is switched to 7.5% for the
  • Panasonic AG HVX200A | P2 Camcoder - Page 104
    /M: Sets LOW (low speed)/OFF/MID (medium speed) to the 1/2/3 position. (Zoom is disabled when set to OFF.) (Camera) Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL IRIS mode) DOWN OPEN: The iris opens when the IRIS dial is turned downward. UP OPEN: The iris opens
  • Panasonic AG HVX200A | P2 Camcoder - Page 105
    MANUAL mode or AUTO mode, set the AGC item on the AUTO SW screen of the setting menu to OFF to use this function. FOCUS RING: Selects the focus ring function (FOCUS or IRIS). The FOCUS RING is functional when the FOCUS switch is in AUTO mode. INDEX/MEMO: Text memo recording (P2 card
  • Panasonic AG HVX200A | P2 Camcoder - Page 106
    can set the white balance value with the USER button. OFF: Does not perform the white balance function in auto mode. This performs the white balance function selected with the WHITE BAL switch. (Camera) ON: Performs auto focusing in auto mode. You cannot use the FOCUS switch and PUSH AUTO button
  • Panasonic AG HVX200A | P2 Camcoder - Page 107
    MODE P2 REC FUNCTION P2 ONE-SHOT TIME P2 INTERVAL TIME P2 PREREC MODE P2 REC SPEED TAPE AUDIO REC TAPE MIC ALC P2 TAPE MIC GAIN 1 P2 TAPE MIC GAIN 2 P2 TAPE 25M REC CH SEL P2 Display mode Description of settings (Camera) Selects the recording format for P2 card. 1080i/60i, 1080i/30P, 1080i/24P
  • Panasonic AG HVX200A | P2 Camcoder - Page 108
    to 24P, 24PA or 24PN. (Camera) Sets the mode in which you advance the time code. (MCR/ FREE RUN: VCR) The time code is advanced regardless of the operation mode. (DUB) Records in the dubbing mode in such a way that the time codes of the clips on the P2 card are carried over. User information
  • Panasonic AG HVX200A | P2 Camcoder - Page 109
    . FRM. RATE: Records the frame rate information for frame conversion. UB PRESET P2 TAPE 1394 IN PRESET P2 TAPE ab cd a:Checking information for user information b:Frame sequence No. • 0 to 4 are displayed in the 24P/24P (ADV) mode. • F is displayed in the 60i/30P mode. c:Frame rates • Frame
  • Panasonic AG HVX200A | P2 Camcoder - Page 110
    . CH1 signals = CH1 track CH2 signals = CH2 track (MCR/ VCR) Sets the audio signals to output from the AUDIO IN/OUT pin jack when the P2 card or the tape is played back. CH1 · CH2: CH1 output = CH1 signals, CH2 output = CH2 signals CH1: CH1 output = CH1 signals, CH2 output = CH1 signals
  • Panasonic AG HVX200A | P2 Camcoder - Page 111
    PLAYBACK FUNCTIONS screen (continued) 32K(12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from the AUDIO IN/OUT jack TAPE Audio recording mode 32K (12bit) 48K (16bit) 32K(12bit) AUDIO setting ST1 ST2 MIX - AUDIO OUT setting CH1 · CH2 CH1 CH2 CH1 · CH2 CH1 CH2 - CH1 · CH2
  • Panasonic AG HVX200A | P2 Camcoder - Page 112
    AV IN/OUT SETUP screen Item CMPNT OUT SEL P2 HP MODE P2 TAPE A. DUB INPUT TAPE 1394 OUT TAPE Display mode Description of settings (Camera) Selects the type of component terminal. (MCR) 720P: Monitor which supports the D4 terminal 1080i: Monitor which supports the D3 terminal 480i: Monitor which
  • Panasonic AG HVX200A | P2 Camcoder - Page 113
    P2 TAPE ZEBRA DETECT 2 P2 TAPE MARKER P2 TAPE SAFETY ZONE P2 TAPE VIDEO OUT OSD P2 TAPE DATE/TIME P2 TAPE LEVEL METER P2 TAPE Display mode Description of settings (Camera The OFF setting can be selected also using the remote control. (Page 76)) (Camera) Select ON to display the audio level meter
  • Panasonic AG HVX200A | P2 Camcoder - Page 114
    P2 TAPE EVF COLOR P2 TAPE Display mode Description of settings (Camera) Selects the unit of zoom and focus values. OFF, NUMBER, mm/feet, mm/m Use the mm/feet or mm/m display only as a general guideline since it is not entirely accurate. (Camera) Select ON to display the remaining card
  • Panasonic AG HVX200A | P2 Camcoder - Page 115
    P2 USER FILE P2 SD CARD FORMAT P2 Display mode Description of settings (Camera) You can save four SCENE FILE settings to the SD memory card, and can also title the saved files. READ: Read WRITE: Write (Camera remote control. (Camera) Sets the control method for backup recording using a backup
  • Panasonic AG HVX200A | P2 Camcoder - Page 116
    MCR) same time.) USB DEVICE: Mode for sending files using the USB connector. 1394 DEVICE: Mode for sending files using the 1394 connector. 1394 HOST: Mode for copying files from the P2 card onto an external hard disk drive using the 1394 connector. (Camera) Sets lighting of the tally lamp. OFF: The
  • Panasonic AG HVX200A | P2 Camcoder - Page 117
    OTHER FUNCTIONS screen (continued) Item TIME ZONE P2 TAPE Display mode Description of settings (Camera) Adds to or deducts from GMT the time value of -12:00 to +13:00 in 30-minute (MCR/ steps. (As an exception, you can
  • Panasonic AG HVX200A | P2 Camcoder - Page 118
    without turning off the camera-recorder's power. • When connection is made with an external device using the IEEE1394 cable P2 card or tape has not been installed in the P2 mode or TAPE mode, respectively, even if ON has been selected as this item's setting. (Camera) LOAD: (MCR/ The previous user
  • Panasonic AG HVX200A | P2 Camcoder - Page 119
    to check the connection status during nonlinear editing. Item 1394 STATUS P2 TAPE 1394 CONFIG P2 Display mode Description of settings (Camera) 1394 status display screen appears. (MCR/ • When a P2 card is used VCR) FORMAT: Format of the signals which are input or output. RATE: Transfer rate
  • Panasonic AG HVX200A | P2 Camcoder - Page 120
    service life. The battery will become unchargeable. The battery has a certain service life which varies depending on how the battery is used condensation has dried out. Cannot focus automatically. • Make sure the camera is in manual mode. You can focus automatically when the auto focus mode is
  • Panasonic AG HVX200A | P2 Camcoder - Page 121
    card with a new one. • The P2 card may be formatted incorrectly. Alternatively, the card you are using may not be formatted for use with the unit. If so, format the card in the unit. P 27 • 2 GB P2 cards cannot be used is closed. - You cannot operate the camera if the cassette holder is open. •
  • Panasonic AG HVX200A | P2 Camcoder - Page 122
    P2 cards or tapes. Mosaic-like noise appears when I cue or review a tape. Images do not appear on the television even though I have connected the camera instructions carefully and select the correct video input connector for the camera not support hot swap playback. To replace one card with another
  • Panasonic AG HVX200A | P2 Camcoder - Page 123
    are some parts of the camera that make a rattling sound in - the VCR mode or when the POWER switch is OFF. This is normal. • This initialization operation is performed when the camera starts up. - It occurs due to the construction of the camera and is not indicative of any trouble. Reference 123
  • Panasonic AG HVX200A | P2 Camcoder - Page 124
    can become slack or damaged if you leave it in the camera. Do not allow any sand or dust to get into the camera-recorder when using it at the beach and other similar places. • Sand and dust can damage the camera-recorder, P2 card and cassette. (Be especially careful when inserting or removing the
  • Panasonic AG HVX200A | P2 Camcoder - Page 125
    brighten as the camera warms up. Do not point the lens or viewfinder at the sun. Doing so may damage the parts inside. Protective caps for the connectors Keep the protective caps fitted over any connectors that are not being used. What to remember when throwing memory cards away or transferring
  • Panasonic AG HVX200A | P2 Camcoder - Page 126
    on drivers, visit the P2 Support Desk at the following Web sites. https://eww.pavc.panasonic.co.jp/pro-av/ To update a driver, select PROPERTY on the thumbnail menu and then SYSTEMINFO to check the camera-recorder's version, go to the site given above, and download the driver as necessary
  • Panasonic AG HVX200A | P2 Camcoder - Page 127
    resetting Reset the system microcomputer if you can no longer operate the camera-recorder even though its power is on or a similar kind of a problem has occurred. Use a pointed object to press the RESET button on the camera-recorder. The menu setting entered and memory contents will not be cleared
  • Panasonic AG HVX200A | P2 Camcoder - Page 128
    • Scratches on tapes • Overuse Using A Cleaning Tape (Page 136, OPTIONAL UNITS) (1) Insert the cleaning tape in the camera recorder and turn on the power a dirty video head with the cleaning tape, it needs cleaning and repair at the dealer. Please contact them. Regular Maintenance For the superior
  • Panasonic AG HVX200A | P2 Camcoder - Page 129
    at least once a year, use up its charge in the camerarecorder, and then store it again. P2 cards • After ejecting a P2 card from the unit, be absolutely These particles could burrow into the cassettes, causing damage to the video camera's heads or other parts. Make sure that all of your tapes are
  • Panasonic AG HVX200A | P2 Camcoder - Page 130
    https://eww.pavc.panasonic.co.jp/pro-av/support/cs/csregistp2m/p2indexe.html When using regular IT tools such as Microsoft Windows Explorer or Apple Finder to transfer data to a PC, follow the instructions below. However, be sure to use the P2 Viewer when returning data to a P2 card. • Transfer the
  • Panasonic AG HVX200A | P2 Camcoder - Page 131
    ones pictured on the left • MultiMediaCard We recommend using SD/SDHC memory cards and miniSD/miniSDHC cards that are made by Panasonic. For the latest information on the unit and on the memory cards which can be used by this unit, go to the P2 support page at the following web site: https://eww
  • Panasonic AG HVX200A | P2 Camcoder - Page 132
    native 720P/24PN - recording 480i/30P over 60i 480i/24P 480i/24PA over 60i over 60i Frame rate 12 18 20 22 26 32 36 48 1080i/60i - 720P/60P DVCPRO HD 720P/30PN 720P/12P - 48P over 60P 720P/12P - 48P native recording P2 Card Video format 720P/24PN DVCPRO50 720P/12P - 48P native
  • Panasonic AG HVX200A | P2 Camcoder - Page 133
    or if the setting for recording clip metadata has been turned off USER CLIP NAME to be recorded Uploaded data + COUNT value∗ Same P2 card with a memory capacity of 8 GB or more is used in this unit and a one-time continuous recording exceeds the prescribed duration (approx. 5 minutes for DVCPRO HD
  • Panasonic AG HVX200A | P2 Camcoder - Page 134
    mode: 1/15, 1/30 30P/30PN mode: 1/15 24P/24PN mode: 1/12 (720P mode only) Minimum subject luminance 3 lx (F1.6, gain +12 dB with a shutter speed of 1/24) Lens hood Large-sized lens hood with wide angle of view Filter diameter 82 mm [VIDEO P2] (DVCPRO HD 1080i 720P) Sampling frequency Y: 74.25 MHz
  • Panasonic AG HVX200A | P2 Camcoder - Page 135
    in DVCPRO HD format using one AJ-P2C016RG card with audio signals recorded on 4 channels. Approx. 32 minutes: When recorded in DVCPRO HD format using one AJ-P2C032RG card with audio signals recorded on 4 channels. • This recording time represents one shot continuously recorded on a P2 card
  • Panasonic AG HVX200A | P2 Camcoder - Page 136
    100-240 V AC, 50/60 Hz 24 W Power Output: 7.9 V DC, 1.9 A (Video Camera) 8.4 V DC, 1.2 A (Charge) indicates safety information. Weight 160 g (0.35 lb) Dimensions (W inches) [OPTIONAL UNITS] XLR microphone AG-MC200G Battery CGA-D54 (5400 mAh: equivalent to accessory battery) Cleaning tape AY-DVMCL [
  • Panasonic AG HVX200A | P2 Camcoder - Page 137
    Memo 137
  • Panasonic AG HVX200A | P2 Camcoder - Page 138
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
AG-HVX200AP
Reference
Menu
Displays
Editing
Playback
Shooting
Preparation
Description
of parts
Before use
Operating Instructions
Memory Card Camera-Recorder
Model No.
Before operating this product, please read the instructions carefully and save this manual for
future use.
F0208T0 -P
Printed in Japan
D
VQT1Q85
ENGLISH