Home » Panamax Manuals » Power » Panamax M4000-PRO » Manual Viewer

Panamax M4000-PRO Instruction Manual

Panamax M4000-PRO Manual

View all Panamax M4000-PRO manuals

Add to My Manuals
Save this manual to your list of manuals

Panamax M4000-PRO manual content summary:

Panamax M4000-PRO | Instruction Manual - Page 1
M4000-PRO Instructions M4000-PRO 1 2 3 WIRING FAULT UNSAFE VOLTAGE BlueBOLT ENABLED Power Management with Control System Interactive Functionality. • 15 Amp Capacity M4000-PRO • 7 Rear Panel Outlets and One Front Panel Convenience Outlet in 3 Controlable banks • Fully Programmable • BlueBOLT®
Panamax M4000-PRO | Instruction Manual - Page 2
the M4000-PRO. Table of Contents Feature Descriptions...pg. 1 Important Safety Instructions, Front Panel Features Overview...pg. 2 Rear Panel Features Overview, Bubble of Protection...pg. 3 BlueBOLT™ Setup, Registration, Trouble Shooting...pg. 4 Outlet Sequencing and M4000-PRO Specifications...pg
Panamax M4000-PRO | Instruction Manual - Page 3
power status, BlueBOLT™ provides the power to control complex A/V systems from their most fundamental level: their power source (M4000-PRO Our upgraded coaxial protection has been specifically designed to virtually eliminate signal loss or Pay-Per-View services. The M4000-PRO also provides surge
Panamax M4000-PRO | Instruction Manual - Page 4
all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord earthing connection. Front Panel Features Overview M4000-PRO 1 2 3 3. WIRING FAULT 4. UNSAFE VOLTAGE 5. BlueBOLT ENABLED 1. 1. Outlet Bank 1,
Panamax M4000-PRO | Instruction Manual - Page 5
with Panamax's Connected Equipment Policy. BANK 1 BANK 1 6. 7. IN CATV / SAT 1 OUT IN PHONE OUT IN LAN OUT 12V BlueBOLT 5. RECEIVER M4000-PRO MAIN POWER 15A 120 VAC/15A GND BANK 3 DVR MEDIA SERVER BANK 2 BANK 1 IN CATV / SAT 1 OUT IN PHONE OUT IN LAN OUT 12V BlueBOLT SAT
Panamax M4000-PRO | Instruction Manual - Page 6
KEY, if BlueBOLT™ cannot detect your device (please allow up to 60 seconds), please follow the on-screen troubleshooting guide. Also confirm an Internet connection by accessing a general website - example www.panamax.com. SYSTEM SETUP #2 Network Equipment NOT-Powered by M4000-PRO (devices in
Panamax M4000-PRO | Instruction Manual - Page 7
BlueBOLT web site or by issuing the command to the Ethernet port (see the Advanced Operation section for details). The default configuration is: Outlet Bank Power > command received on the Ethernet port. M4000-PRO Specifications AC POWER Operating Voltage 120 Vac / 60Hz Current
Panamax M4000-PRO | Instruction Manual - Page 8
numbered 1 through 3 left to right. OUTLET 5 OUTLET 4 OUTLET 6 OUTLET 3 OUTLET 7 OUTLET 2 LAN OUTLET 1 MAIN POWER 120 VAC/15A 15A GND 7 BANK 3 6 5 WIRING FAULT UNSAFE VOLTAGE BlueBOLT FRONT PANEL OUTLET ENABLED BANK 2 4 3 BANK 1 2 1 IN CATV / SAT 1 OUT IN PHONE OUT IN LAN
Panamax M4000-PRO | Instruction Manual - Page 9
unless needed for clarity. Action and Queries Command messages are sent to the M4000-PRO to have it perform a task. The task can be to perform a physical the command is for an action such as switching an outlet bank, the M4000-PRO will not necessarily provide a response message. If it is desired to
Panamax M4000-PRO | Instruction Manual - Page 10
retrieve the following outlet status and electrical measurement information from the M4000-PRO. Status elements are enclosed in the element. Query precision amps Measured total load current, 0.1 Ampere precision watts Measured total power consumption, 1 Watt
Panamax M4000-PRO | Instruction Manual - Page 11
Attribute: id = "bank" Content None Example: Power cycle an outlet bank Which outlet bank to control Power cycle outlet bank 1 Power Sequence Command the M4000-PRO to initiate a power on/off sequence. For a turn on sequence, the outlet banks
Panamax M4000-PRO | Instruction Manual - Page 12
network connection is restored; connection to BlueBOLT is reestablished Command Reboot M4000-PRO Attribute: None Content None Example: < settings for an outlet bank Action: 0=OFF delay, 1=ON delay, 2=Power cycle delay Delay time, in seconds, 65536 seconds max Set Trigger Enable
Panamax M4000-PRO | Instruction Manual - Page 13
port event subscription is allowed. For example, to have event messages sent from a M4000-PRO with MAC address 10-65-A3-03-FF-FF to a control system at IP OFF Sequence Status A Sequence Status event is posted when a power on or power off sequence is initiated or completed. Element Tag:
Panamax M4000-PRO | Instruction Manual - Page 14
from over-voltage or under-voltage shutdown mode. Element Tag: Attribute: None Content 0 | 1 | 2 | 3 0 = power normal 1 = fault recovery 2 = under voltage 3 = over voltage Example: 3 Overvoltage condition Wiring Fault
Panamax M4000-PRO | Instruction Manual - Page 15
Scheduled Action Fired A Scheduled Action Fired event is posted when the M4000-PRO performs a scheduled operation. Element Tag: Attribute: None Content daysofweek Scheduled days. See below. minuteofday Elapsed minutes since midnight
Panamax M4000-PRO | Instruction Manual - Page 16
the instruction. CAUTION: A shielded-type power cord is servicing. Also, please enclose a note giving your name, address, phone number and a description of the problem. Panamax, 1800 S. McDowell Blvd., Petaluma, CA 94954 • www.panamax.com • 800-472-5555 ® 2015 Core Brands LLC, Panamax and BlueBOLT