Home » Onkyo Manuals » Audio Receivers » Onkyo 8522 » Manual Viewer

Onkyo 8522 Owner Manual

Onkyo 8522 - TX AV Receiver Manual

UPC - 751398007057

View all Onkyo 8522 manuals

Add to My Manuals
Save this manual to your list of manuals

Onkyo 8522 manual content summary:

Onkyo 8522 | Owner Manual - Page 1
Stereo Receiver TX-8522/ TX-8222 Instruction Manual Contents Introduction 2 Connections 12 Enjoying Audio Sources 20 Thank you for purchasing an Onkyo Stereo Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this
Onkyo 8522 | Owner Manual - Page 2
the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near
Onkyo 8522 | Owner Manual - Page 3
a suitable fuse in the plug. For European Models Declaration of Conformity We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical
Onkyo 8522 | Owner Manual - Page 4
Pure Audio Sound (TX-8522 only) .... 23 Recording 24 Recording the Input Source 24 Recording Audio and Video from Separate Sources (TX-8522 only 25 Listening to the Radio 26 AM Frequency Step Setup (not North America and Europe 26 Listening to AM/FM Stations 26 Using RDS (European Models Only
Onkyo 8522 | Owner Manual - Page 5
or corrosion. Features TX-8522 ❑ 100 Watts/Channel @ 8 ohms (FTC) (USA & CANADA) ❑ 100 Watts/Channel @ 4 ohms (IEC) (EUROPE) ❑ 130 Watts/Channel @ 4 ohms (JEITA) (ASIA) ❑ High-Current, Low-Impedance Drive ❑ Discrete Output Stage Circuitry ❑ XM Ready* (North American model only) ❑ 3 Audio Inputs (CD
Onkyo 8522 | Owner Manual - Page 6
Getting to Know the Receiver Front Panel TX-8522 North American Model 1 23 4 56 7 8 9 J KL N V U T S RQ P O TX-8522 Other Models * The name of the buttons and other controls varies according to the shipping destination. For details, refer to the description on the next page. 1 23 4
Onkyo 8522 | Owner Manual - Page 7
is selected. D DIRECT button (23) Outputs the original sound source without applying any effects. E Remote-control sensor (10) Receives control signals from the remote controller. F DISPLAY (30) Displays various information about the currently selected input source. G TUNING UP/DOWN buttons (26, 29
Onkyo 8522 | Owner Manual - Page 8
Getting to Know the Receiver-Continued Rear Panel TX-8522 1 B 345 67 8 9 JK L M N TX-8222 1B 5 67 8 9 JK L OP A REMOTE CONTROL jacks These (Remote Interactive) jacks can be connected to the jacks on your other Onkyo audio components. The receiver's remote controller can then be used
Onkyo 8522 | Owner Manual - Page 9
while the receiver is muted. 3 DIRECT indicator (TX-8522 only) Lights up while the DIRECT function is enabled. 4 Radio indicators TUNED: Lights up when tuned to a radio station. AUTO: For AM and FM radio, lights up when Auto Tuning is selected, and disappears when Manual Tuning mode is selected. RDS
Onkyo 8522 | Owner Manual - Page 10
Remote Controller TX-8522 North American model (RC-664S) TX-8522 Other models (RC-665S) TX-8222 All models (RC-666S) 1 1 9 9 2 J 2 J K K 3 3* L L 4 5 M 4 5 M N N O O P P Q Q R R 6 S 7 T T 8 U 8 U * For the RC-666S, the names for the INPUT SELECTOR buttons
Onkyo 8522 | Owner Manual - Page 11
Remote Controller-Continued For detailed information, see the pages in parentheses. A ON/STANDBY button (20) Sets the receiver to On or Standby. B SLEEP button (22) Used with the Sleep function. C INPUT SELECTOR buttons (21) and number buttons (26) When any of these buttons is pressed, the input
Onkyo 8522 | Owner Manual - Page 12
sound only from either speaker set, use speakers whose impedance is between 4 and 16 ohms. For the North American model TX-8522, when the speaker impedance is 4 or 6 ohms, set the speaker impedance setting on the receiver the terminal tight. • Read the instructions supplied with your speakers. • Pay
Onkyo 8522 | Owner Manual - Page 13
-Continued Conﬁguring the Speaker Impedance (TX-8522 North American model only) In this model, the factory default for speaker impedance minimize the volume level on the receiver 4 before conﬁguring the speaker impedance. 1 Press the SETUP button on the remote controller to complete the setting.
Onkyo 8522 | Owner Manual - Page 14
and how to connect commercially available outdoor FM and AM antennas. The receiver won't pick up any radio signals without any antenna connected, so you fully into the jack. I Other Models Push Insert wire Release Insert the plug fully into the jack. Once your receiver is ready for use, you'll
Onkyo 8522 | Owner Manual - Page 15
It's best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as shown. Outdoor AM antennas work best electrical shock hazards. TV/FM antenna splitter To the receiver To TV (or VCR) 15
Onkyo 8522 | Owner Manual - Page 16
sound TX-8522) Left (white) Analog audio Left (white) Right (red) Right (red) (Yellow) Composite video (Yellow) • Push each plug in all the way to make a good connection (loose connections can cause noise or malfunctions). Right! Wrong! Connecting a Turntable The receiver's PHONO input
Onkyo 8522 | Owner Manual - Page 17
Dock's jack, as shown. When you change the input display name to "HDD," you can operate the RI Dock using the remote controller supplied with the receiver (see page 20). Connecting a DVD Player For the TX-8522, use an analog audio cable to connect the TX-8522's DVD IN L/R jacks to the analog audio
Onkyo 8522 | Owner Manual - Page 18
the VCR, and use a video cable to connect the TX-8522's VIDEO OUT V jack to the composite video input jack on the VCR. In addition, connect the TX-8522's MONITOR OUT jack to a composite video input jack on the TV. You can select the video and sound from the VCR simultaneously by pressing the VIDEO
Onkyo 8522 | Owner Manual - Page 19
to another manufacturer's component may cause the receiver to malfunction. • Some components may not support all functions. See the manuals supplied with your other Onkyo components for more information. e.g. TX-8222 European models e.g. TX-8522 North American model Caution: • Make sure that the
Onkyo 8522 | Owner Manual - Page 20
operate the RI Dock using the remote controller supplied with the receiver (see pages 10, 11). 1, 2 1, 2 1 TX-8522 or Press the appropriate input selector button. The selected input name appears in the display. TX-8222 or 2 Press and hold down the input selector button selected in the Step
Onkyo 8522 | Owner Manual - Page 21
SPEAKERS A/B MASTER VOLUME INPUT SELECTOR VOLUME / 1 Receiver (ex. TX-8522 North American model) Press the input selector button to select the component that you want to listen to. Remote controller 4 Receiver Remote controller To adjust the volume, use the receiver's [MASTER VOLUME] control
Onkyo 8522 | Owner Manual - Page 22
Sources-Continued SLEEP DIMMER (TX-8522 Other than North American model) DIMMER PHONES DIMMER (TX-8222) MUTING Muting the receiver (remote controller only) You can temporarily mute the output of the receiver. 1 Receiver Press the remote controller's [MUTING] button. The receiver is muted. To
Onkyo 8522 | Owner Manual - Page 23
The DIRECT indicator lights up. You can conﬁgure whether the DIRECT function is applied or not for input sources individually. Enjoying the Pure Audio Sound (TX-8522 only) Pressing the [PURE AUDIO] button activates the Pure Indicator Audio listening mode and turns on the PURE AUDIO indicator
Onkyo 8522 | Owner Manual - Page 24
anything other than personal enjoyment! This section explains how to record the selected input source to a component with recording capability. Input selector buttons TAPE 2 Recording the Input Source For the TX-8522, you can record an audio signal on a recording component connected to the TAPE
Onkyo 8522 | Owner Manual - Page 25
Recording-Continued The signal flow in monitoring the recorded sound TX-8522/TX-8222 TAPE 2 T2 MONITOR OFF button Amplifier T2 MONITOR ON PLAY REC TAPE 2 Input source (CD, FM, etc.) The signal flow in monitoring the sound before recording TX-8522/TX-8222 TAPE 2 T2 MONITOR OFF button Amplifier
Onkyo 8522 | Owner Manual - Page 26
With the built-in tuner, you can enjoy AM and FM radio stations. 1 Receiver or [TX-8522 North American model] Use the [FM/AM] input selector button to select AM or FM. [TX-8522 Other models/TX-8222] Use the [FM] or [AM] input selector button to select AM or FM. In this example, FM has been
Onkyo 8522 | Owner Manual - Page 27
and XM channels. I Selecting Presets 1 Receiver Remote controller To select a preset, use the number buttons on the receiver, or the remote controller's PRESET [ ]/[ ] buttons. For the TX-8522 other than North American model, the PRESET [ ]/[ ] buttons on the receiver also can be used to select
Onkyo 8522 | Owner Manual - Page 28
RDS (European Models Only) RDS only works with European models and only in areas where RDS broadcasts are available. When tuned into an RDS station, the RDS indicator appears. RDS indicator I What is RDS? RDS receiver supports four types of RDS information: PS (Program Service) When tuned to an RDS
Onkyo 8522 | Owner Manual - Page 29
) RT/PTY/TP When tuned to an RDS station that's broadcasting text information, the text can be displayed. 1 RT/PTY/TP Press the [RT/PTY/TP] button once. The RT information scrolls across the display. Notes: • The message "Waiting" may appear while the receiver waits for the RT information. • If
Onkyo 8522 | Owner Manual - Page 30
a frequency of 89.50 MHz has been stored in preset number 2 and will be given the name "ONKYO." 1 Select the desired preset channel. (Refer to "Selecting Presets" on page 27.) 2 TX-8522 North American Press the [CHARACTER] button on the front panel. The frequency in the display goes off and
Onkyo 8522 | Owner Manual - Page 31
sensed. IR IN Connecting block IR Receiver TX-8522/ TX-8222 Remote controller In the cabinet Main room : Signal ﬂow Example for the remote zone The IR IN input allows you to control the receiver from the remote zone with the remote controller even though the remote zone may be on the other
Onkyo 8522 | Owner Manual - Page 32
Troubleshooting If you have any trouble using the receiver, look for a solution in this section. If you can't resolve the issue yourself, try resetting the receiver before contacting your Onkyo dealer. [TX-8522] To reset the receiver to its factory defaults, turn it on and, while holding down the
Onkyo 8522 | Owner Manual - Page 33
Onkyo DS-A1 Remote Interactive Dock to the TAPE 1 or VIDEO jacks on the TX-8522 (or TAPE 1 or LINE 2 jacks on the TX-8222), for the remote controller to work properly, you must set the input the wall outlet, set the receiver to Standby. Memory Backup The receiver uses a battery-less memory backup
Onkyo 8522 | Owner Manual - Page 34
Specifications (TX-8522) Amplifier Section Rated Output Power (FTC) (North Inputs Analog Inputs PHONO, CD, TAPE 1, TAPE 2, DVD, VIDEO I Audio Outputs Analog Outputs TAPE 1, TAPE 2, VIDEO Speaker Outputs SPEAKERS A SPEAKERS B Phones 1 IR Input/Output 1/1 Specifications and features
Onkyo 8522 | Owner Manual - Page 35
× 13-11/16" 7.5 kg 16.5 lbs. I Audio Inputs Analog Inputs PHONO, CD, TAPE 1, TAPE 2, LINE 1, LINE 2 I Audio Outputs Analog Outputs TAPE 1, TAPE 2 Speaker Outputs SPEAKERS A SPEAKERS B Phones 1 IR Input/Output 1/1 Speciﬁcations and features are subject to change without notice. 35
Onkyo 8522 | Owner Manual - Page 36
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO 1494-680452 ONKYO CHINA LIMITED