Olympus D-40 D-40 Zoom Reference Manual (5.7MB)

Olympus D-40 - Camedia 4MP Digital Camera Manual

Get Olympus D-40 - Camedia 4MP Digital Camera PDF manuals and user guides
UPC - 050332134935
View all Olympus D-40 manuals
Add to My Manuals
Save this manual to your list of manuals

Olympus D-40 manual content summary:

  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 1
    you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. Ⅲ We recommend that you take test shots to get accustomed
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 2
    and Windows are registered trademarks of Microsoft Corporation. • Macintosh is a trademark of Apple Computer Inc. • All other company and product names are registered trademarks and/or trademarks of their respective owners. • The standards for camera file systems referred to in this manual are
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 3
    : Self-Portrait P: Program auto A: Aperture priority S: Shutter priority M: Manual mode : My Mode Take sequential shots! Picture transfer to a computer Customize various functions at the position! Record movies! In addition to still pictures, you can also record video with sound. Sound is output
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 4
    25 Battery check 26 Card basics 28 Inserting/ejecting the card 29 Power on/off 30 Monitor appearance and sound 31 Card check 32 Date/time setting 33 Holding the camera 36 Quick-start guide 37 Taking still pictures 38 Recording movies 39 Viewing still pictures - Using Quick View 40 Playing
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 5
    Focus lock - Focusing on subjects that are not in the center of the frame 71 FULLTIME AF - Continuous focusing on moving subjects 72 Manual focus 73 Taking still pictures 75 Taking still pictures while using the viewfinder 75 Taking still pictures while using the monitor 77 Chapter 4 5
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 6
    Chapter 4 Contents Recording movies 80 Zoom - Telephoto/Wide-angle shooting 82 Digital zoom 82 Flash shooting 84 Auto-flash mode setting - Taking close-up pictures 92 Self-timer shooting 93 Remote control shooting 94 Sequential shooting 96 Sequential shooting & AF Sequential shooting 96
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 7
    Chapter 6 Contents Adjusting image quality and exposure 104 Record mode 105 Selecting record modes 105 ENLARGE SIZE 109 ISO sensitivity 110 Exposure compensation 111 White balance 112 AUTO (auto white balance) 112 PRESET (preset white balance) 112 (One-
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 8
    Chapter 7 Chapter 8 Contents Erasing pictures 134 Single-frame erase 134 All-frame erase 135 Formatting cards 136 Playback on a TV 137 Picture rotation 138 Useful functions 139 MY MODE SETUP 140 Shortcut 143 Setting the shortcut menu 144 Using the shortcut
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 9
    Downloading image files 175 Disconnecting the USB cable 179 Downloading directly from a card 181 Using optional accessories 182 AC adapter 183 Miscellaneous 184 Troubleshooting 185 User maintenance 192 After use 192 Cleaning the camera 192 Error codes 193 Specifications 195 Glossary of
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 10
    87) Self-timer/ Remote control lamp (P. 93, 94) Lens barrier (P. 30) Lens Speaker (P. 131) Battery compartment cover (P. 25) Tripod socket (P. 93) Battery compartment lock (P. 25) ● Do not put anything that is sensitive to magnetism (credit cards, floppy disks, etc.) near the camera. Doing so de
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 11
    12) Monitor (P. 15 - 20) Monitor button ( ) (P. 78, 119) Card access lamp (P. 69) Card cover (P. 29) OK/Menu button (P. 44) Manual focus button ( ) (P. 73) Strap eyelet (P. 24) Arrow pad P. 40) Connector cover (P. 137, 173) Multi connector (USB, A/V OUT) (P. 137, 173) DC-IN jack (P. 183) 11
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 12
    out of focus, the lamp blinks. ● Blinks if taking next shot is not possible, such as when the camera is processing pictures you have just shot or when there is no space available on the card. ● Blinks when there is a problem with the card. 3 AF target mark (P. 68) ● Place this on the subject. 12
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 13
    parts 5 Remote control (P. 94) ● Displayed when remote control Card error (P. 32, 193, 194) ● When the power is turned on, the camera checks the card. If there is a problem with the card, this indication appears. 9 Card writing ● Displayed when recorded pictures are being written to a card. 0 Record
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 14
    Names of parts Control panel indications (Cont.) 1 except 0. ^ Battery check (P. 26) ● When remaining battery power is low, the battery check indication changes Displays available movie recording time. Card error (P. 32) ● Displayed if there is a problem with the card. T See "Error codes" on
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 15
    Names of parts Monitor indications Self- Portrait mode, P: Program mode, A: Aperture priority mode, S: Shutter priority mode, M: Manual mode, 2 Aperture value (P. 65, 67) : My Mode, : Movie mode ● Displays level considered optimal by the camera. 5 AF target mark (P. 78) ● Place this on the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 16
    of still pictures you can shoot. Seconds remaining ( mode only) (P. 80, 106) ● Displays available movie recording time. 7 Manual Focus (P. 73) ● Displayed when locking focus using the Manual focus function. 8 Memory gauge (P. 79, 81) ● Displays the amount of space used by the pictures stored in the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 17
    parts ● Displays the ISO (AUTO, 100, 200 or 400) selected on the menus. When set to AUTO, camera movement. @ Record mode (P. 105) TIFF/SHQ/HQ/SQ1/SQ2 ● Displays the record remote control (P. 93 - 95) ● Displayed when self-timer/remote control shooting is activated. : Self-timer shooting : Remote
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 18
    Names of parts Monitor indications - Shooting information (Cont.) SLOW1 2272x1704 % Flash mode (P. is selected by pressing the (Macro/Spot) button. No indication: Digital ESP : Spot metering : Macro : Spot metering+Macro & Sound record (P. 99, 100) ● Displayed when is set on the menus.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 19
    display (P. 127). Still picture playback information Names of parts x10 HQ '01.12.23. 21:56 20 When batteries used. 2 Print reserve (P. 160) ● Displayed when the Print reserve is set. 3 Number of prints (P. 161, 163) ● Displays the number of prints. 4 Sound record ● Displayed when sound is recorded
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 20
    Names of parts Monitor indications - Playback information (Cont.) Movie playback information HQ SIZE: 320x240 20 When INFO is set to OFF '01.12.23 FILE: 100-0020 When INFO is set to ON 1 Battery check 2 Movie mark (P. 119) 3 Sound record ● Displayed when sound is recorded. 4 Protect (P. 133) ●
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 21
    How to use this manual The instructions in this manual use a series of numbers for each operating procedure and button/dial illustration. Follow these numbers in order when operating the camera. Example 1 If a button is shown in black, press it as part of the step. Shooting mode setting - Mode dial
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 22
    How to use this manual (Cont.) Example 2 Before using the following function, set the mode dial to any of the positions shown. Chapter 8 Beep You can set the volume of
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 23
    1 Chapter Getting started Before using the camera, you should follow the steps outlined in this chapter.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 24
    with the strap when you carry the camera, as it can easily catch on stray objects, causing serious damage. ● Attach the strap correctly as shown so that the camera does not fall off. If the strap is attached incorrectly and the camera falls off, Olympus is not responsible for any damages. 24
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 25
    packs cannot be charged. ● Do not peel the label on a CR-V3 lithium battery pack. If an insulating sheet covers the terminals, peel it off ONLY from the terminals. 1 OK Make sure the camera is turned off (i.e. the lens barrier is closed and the monitor if turned off). 4 2 While pressing the lock
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 26
    . Turns off after blinking for approx. 12 sec. Remaining power level: exhausted. Replace with a new battery. ● After taking a picture or when turning on the power with batteries that are running low, the camera may emit several short beeps and the number of storable pictures will blink. If this
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 27
    power. ● Manganese (zinc-carbon) batteries cannot be used. ● The lives of battery packs may vary according to the type of battery, manufacturer, camera shooting conditions, etc. ● When connecting the camera to a PC, it is recommended that you use the optional AC adapter. (P. 183) ● Power is consumed
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 28
    16 MB standard card ● Optional Olympus CAMEDIA-brand cards (4 MB - 128 MB; all cards except 2MB) ● Commercially-available 3 V (3.3 V) cards (4 MB - 128 MB; all cards except 2MB) ● 2 MB cards cannot be used. ● This camera may not recognize a non-Olympus card (such as 3 V (3.3 V)) or a card that was
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 29
    not close. Closing the card cover forcibly will damage the card cover. 3 Ejecting the card Grasp the card and pull in straight out. 4 Close the cover tightly. ● NEVER open the card cover, eject the card, remove the batteries, or disconnect the optional AC adapter while the camera is in use or the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 30
    on the monitor. ● If the lens does not extend, the lens barrier is not fully open. 3 Partly close the lens barrier to turn the camera off (about halfway across the lens). Wait until the lens is fully retracted. ● Do not push the lens barrier against the lens. ● Shutdown image is displayed on
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 31
    camera stops working T To save battery power, the camera automatically enters the Sleep mode after about 3 minutes of non-operation. The camera activates again as soon as you touch the zoom is sensitive to magnetism (credit cards, floppy disks, etc.) near the camera. Doing so de-magnetize the item
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 32
    Monitor TIPS Card error mark There is no card in the camera or the card is not locked into place. T Insert a card. If a card is already inserted, remove it and insert it again. There is a problem with the card. T Use a new card. FORMAT CAUTION ERASING ALL YES NO The card cannot record, play
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 33
    date/time is saved with recorded pictures, be sure to set it correctly. 1 Open the lens barrier to turn on the camera and enter the shooting mode. select SETUP, then press í. ● The items in the SETUP menu appear. SETUP CARD PIC CAM ALL RESET SHUTTER SOUND PW ON SETUP PW OFF SETUP ON LOW 5
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 34
    Chapter 1 Date/time setting (Cont.) 6 When is selected in green on the screen, press Ññ to select the date format. ● Select any one of the following formats: DMY (Day/Month/Year) MDY (Month/Day/Year) YMD (Year/Month/Day) ● This step and the following steps show the procedure used when
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 35
    setting, don't press until the clock hits 00 seconds. The clock starts when you press the button. 10 To turn off the camera, close the lens barrier. ● The lens is retracted. ● The current settings stay the same even when the power is turned off, unless they are readjusted. ● The date setting
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 36
    1 Holding the camera Hold the camera firmly with both hands while keeping your elbows at your sides to prevent the camera from moving. Keep your fingers and the strap away from the lens and flash. Horizontal grip Correct Vertical grip Flash Lens Do not hold this part of the lens. Top view
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 37
    2 Chapter Quick-start guide Explains the simplest shooting and playback methods. This Quick-start guide has been designed for those who want to become familiar with the camera in a very short time. Before using the camera, be sure to follow the steps explained in chapter 1.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 38
    the lens barrier. 2 Point the camera towards a subject while viewing through the viewfinder. Card card access lamp blink and the camera begins storing pictures on the card. ● NEVER open the card cover, eject the card, remove the batteries, or pull the plug of an optional AC adapter when the card
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 39
    Chapter 2 Recording movies Viewfinder Green lamp 2 Point the camera towards the subject and compose the picture while viewing through the monitor. 1 Set the mode dial to and open the lens barrier. ● The monitor turns on. Card access lamp 3 Press the shutter button halfway. ● The green lamp
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 40
    the recorded Zoom lever Turning the zoom lever towards T: Enlarges the picture (P. 128). W: Displays multiple pictures at the same time (P. 129). 3 To return to the shooting mode, press the shutter button halfway. ● The monitor turns off. Shoot pictures using the viewfinder. ● If the camera
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 41
    View 1 Display the movie frame (picture with ) you want to play back. T See steps 1 and 2 on page 40. 2 Press to display menu. 3 Press Ñ on the arrow pad to select MOVIE PLAY. ● The card access lamp blinks while movie data is accessed. MOVIE PLAY INFO MODE MENU 5 Press to start Playback. ● When
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 42
    pictures 1 Display the picture you want to erase. T See steps 1 and 2 on page 40. 2 Press the (erase) button. 3 ERASE YES N O SELECT GO When the ERASE screen button. 4 Press to erase the picture. ● Make sure the card is not write-protected. If it is, remove the write-protect seal. 42
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 43
    3 Chapter Using the Menus This chapter explains what the camera's menus are and how they work. Some functions on this camera are only available by using the menus.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 44
    chart below. OK button Menu Basics Displaying the top menu (P. 45) ᮢ Selecting MODE MENU (P. 46) ᮢ Selecting the CAMERA, PICTURE, CARD, SETUP tabs (P. 47) ᮢ Selecting shortcut menus (P. 55) ᮢ Selecting functions (P. 48) ᮢ Selecting settings (P. 48) ᮤ ᮢ Saving settings (P. 48) ᮢ Closing
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 45
    top menu (same as in , , or ) MODE MENU WB MODE MENU DIGITAL ZOOM Mode dial P top menu (same as in A/S/M or ) top menu MODE MENU WB MODE MENU (P. 46) Shortcut menus (P. 55) Playback top menu (for still pictures) CARD
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 46
    MODE MENU To enter MODE MENU, press í. Functions available in the MODE MENU depend on the mode. MODE MENU functions are divided into 4 tabs (CAMERA, PICTURE, CARD, SETUP). In the , , , , or mode, the PICTURE tab is not available. See "Using Tabs" on the next page. P top menu MODE MENU MODE MENU
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 47
    tab MODE MENU WB DRIVE ISO P/A/S/M OFF AUTO SET CARD PIC CAMERA CAM: CAMERA Functions for shooting: selecting drive modes, using digital zoom, etc. PIC: PICTURE Functions for adjusting images: selecting record modes, adjusting white balance, etc. In the , , , , or mode, the PICTURE tab is
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 48
    the desired function using Ññ and press í. CAMERA SET CARD PIC CAMERA CAMERA tab DRIVE ISO P/A/S/M OFF AUTO SET CARD PICTURE CAM PICTURE tab HQ WB AUTO RED BLUE SHARPNESS CONTRAST CARD tab CARD SETUP SET CARD PICTURE CAM SET CARD PIC CAMERA The sliding bar is displayed when an item
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 49
    ALL RESET SHUTTER SOUND PW ON SETUP PW OFF SETUP ON LOW 5 Press ñ to select . SETUP CARD PIC CAM ALL RESET SHUTTER SOUND PW ON SETUP PW OFF SETUP ON LOW SETUP CARD PIC CAM SET CARD PIC CAMERA 3 Keep pressing ñ until the SETUP tab is selected. The å mark moves to the selected tab
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 50
    can be extended even more by the 2.5X digital zoom, making possible up to approx. 7x zoom. FULLTIME AF ~P. 72 Keeps the image in focus at all times without having to press the shutter button halfway. (still pictures) ~P. 99 Allows approx. 4 seconds of sound recording to be attached to a picture. 50
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 51
    panorama pictures to be taken with Olympus CAMEDIAbrand SmartMedia cards. To connect pictures into a single panoramic image, CAMEDIA Master software is required. FUNCTION ~P. 103 Lets you shoot pictures in black & white or sepia tone. ~P. 105 - 109 Sets the record mode resolution. WB ~P. 112, 113
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 52
    Cont.) ALL RESET ~P. 146 Selects whether to keep the current camera settings when you turn off the power. ~P. 148 Sets the VIEW ~P. 152 Selects whether to display images on the monitor while saving them to a card. MY MODE SETUP ~P. 140 Customizes settings, which are activated in the mode. SLEEP
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 53
    ~P. 79 Adjusts the brightness of the monitor. ~P. 33 - 35 Sets the date and time. m/ft ~P. 157 Sets the measurement units (m/ft) used during manual focus. SHORT CUT ~P. 143 - 145 Lets you assign frequently-used functions as shortcut menus on the top menu. MODE MENU Functions (Playback) ~P. 132 Adds
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 54
    Chapter 3 MODE MENU Functions (Playback) (Cont.) ALL RESET ~P. 146 Selects whether to keep the current camera settings when you turn off the power. VOLUME ~P. 131 Sets playback sound volume, as well as the volume of the sound selected in PW ON
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 55
    mode dial is set to P, A/S/M or . See "Shortcut" (P. 143) for more details. setting screen DRIVE ISO P/A/S/M OFF SET CARD PIC CAMERA SET CARD PICTURE CAM SET CARD PICTURE CAM Record mode setting screen WB SHARPNESS CONTRAST TIFF SHQ HQ SQ1 SQ2 White balance setting screen WB SHARPNESS
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 56
    /time setting Sets the date/time. Record mode Sets the record mode. Card format Formats the card. top menu CARD SETUP Self-timer/remote control Selects self-timer shooting or remote control shooting. Record mode Sets the record mode. Digital zoom The optical zoom can be extended to a maximum of
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 57
    Chapter 3 Modes & Shortcut Menus (Cont.) Slide-show Runs through all saved pictures one after another. Information display Changes the amount of shooting information displayed on the monitor. Print reserve Stores printing information required for DPOF printers. Movie playback Plays back movies.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 58
    Settings Function Mode DRIVE ISO P/A/S/M SLOW NOISE REDUCTION DIGITAL ZOOM FULLTIME AF (still pictures) (movies) FUNCTION WB : OFF - - OFF OFF - OFF - - OFF HQ: 2272x1704 (For other record modes, settings are as follows.) HQ TIFF: 2272x1704 SHQ: 2288x1712 SQ1: 1280x960/ NORMAL
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 59
    Chapter 3 Modes & Factory Default Settings (Cont.) Function Mode Playback - ‫ע‬0 - SHARPNESS CONTRAST SATURATION - ‫ע‬0 - - ‫ע‬0 - - ‫ע‬0 - ALL RESET - ON - SHUTTER SOUND - PW ON SETUP - LOW 1/LOW SCREEN: 1, SOUND: 1 PW OFF SETUP - SCREEN: 1, SOUND: 1 REC VIEW - ON -
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 60
    4 Chapter Shooting basics This chapter explains the basics of taking good pictures with your camera. You should read it through in order to make the most of the information provided. Before using the camera, also be sure to read "How to use this manual" and "Getting started", chapter 1.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 61
    turns on and the lens automatically extends. ● When the camera mode is set to A/S/M, or , the monitor turns on automatically. Full-auto shooting Allows you to take still pictures using NO special functions or manual adjustments. The camera sets optimal focusing and exposure. Suitable for simple
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 62
    you to take a picture of yourself while holding the camera. Point the lens towards you and take a shot. The focus is locked on you (shooter). The camera automatically selects the optimal settings for this type of shooting condition. Zooming is not possible. Program shooting Allows you to take still
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 63
    setting T P. 65 Aperture (F value) is decreased. Aperture (F value) is increased. S (Shutter priority shooting) Allows you to set the shutter speed manually. The camera sets the aperture automatically. Set the shutter speed according to the subject and the type of picture you want. Shutter speed
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 64
    the power is turned on in the mode. Settings such as aperture value, zoom position, etc. can be customized. In the mode, you can select exposure mode Movie record Allows you to record movies. The camera sets the aperture and shutter speed automatically. Even if the subject moves during recording or
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 65
    - Aperture priority shooting 1 In the top menu, select MODE MENU T CAMERA T P/A/S/M T A. 2 To increase the aperture value (F value), press f4.8*, f5.6, f8.0 *Open-aperture (the widest aperture setting) depends on the zoom position. ● When the flash is set to the auto-flash mode, the shutter
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 66
    Cont.) Shutter speed setting - Shutter priority shooting 1 In the top menu, select MODE MENU T CAMERA T P/A/S/M T S. 2 To set the shutter speed faster, press Ñ. To set the shutter 100: 4 sec. ISO 200: 2 sec. ISO 400: 1 sec. *2 Varies between 1/500 to 1/1000 depending on the aperture value and/or
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 67
    dial (Cont.) Aperture & Shutter speed setting - Manual shooting 1 In the top menu, select MODE MENU T CAMERA T P/A/S/M T M. 2 To set the shutter setting) depends on the zoom position. *2 Varies between 1/500 to 1/1000 depending on the aperture value and/or zoom position. Ⅵ Exposure differential
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 68
    will activate these stored settings. T MY MODE SETUP (P. 140) 1 In the top menu, select MODE MENU T CAMERA T P/A/S/M T Select a mode. ● Although the settings you are using can be saved, the saved zoom position will not be the same as the one being used. ● In the mode, the monitor always turns on
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 69
    access lamp blinks. ● mode: The camera starts recording a movie. 3 ONLY for the (movie record) mode To stop recording, press the shutter button all the way again. ● The card access lamp blinks and the camera starts storing the movie on the card. You cannot record another movie OK until the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 70
    auto focus may not work properly. If you run into problems, try the procedure below or switch to Manual focus (P. 73). Conditions 1, 2 and 5 Auto focus may in the viewfinder on an object that is the same distance from the camera as the subject, then half-press the shutter button to lock focus,
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 71
    button halfway to lock the focus. Brightness (exposure) is also locked and the green lamp lights. Green lamp 2 Compose your picture (point the camera towards the subject) while keeping the Shutter button pressed halfway. 3 Press the Shutter button all the way. TIPS ● The green lamp blinks
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 72
    recording continues with the focus locked when the shutter button is pressed halfway. 1 In the top menu, select MODE MENU T CAMERA T FULLTIME AF T ON. 2 Turn on the monitor (P. 78). ● If the monitor is not on, Fulltime AF does not function. Factory default setting P A/S/M : OFF : ON ● Battery
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 73
    focus If Auto focus is unable to lock, use manual focus. 1 Hold down for more than 1 second. When the focus distance selection screen appears on the monitor, press 5m í to select MF. 3m 2m 0.8m 2
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 74
    not possible at ∞. T Adjust by moving Ññ slightly while watching the monitor. ● Although the focus distance is saved, the picture goes out of focus. T If the zoom lever is pressed after manual focus setting, the saved focus distance may be changed. Try setting again. 74
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 75
    blinks and the camera begins storing pictures on the card. When the green lamp stops blinking, you can take another shot. ● The card access lamp blinks while pictures are being stored on the card. OK ● Number of still pictures that can be stored on a 16 MB card T HQ record mode (2272 x 1704
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 76
    zoom in on a subject or shoot a Zoom lever wider picture (zoom-out) T To zoom in on a subject, press the zoom lever towards T. To shoot a wider picture, press the zoom CARD FULL appears, there is no space on the card. Delete pictures (P. 134, 135), replace with a new card put the camera into
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 77
    it is pressed hard, the camera may move and pictures may come out blurred. ● Recorded pictures will be saved in the card regardless of whether the camera is turned off or the batteries are replaced or removed. ● NEVER open the card cover, eject the card, remove the batteries, or pull the plug when
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 78
    shooting" (P. 87). Viewfinder Number of storable AF target mark pictures Green lamp Orange lamp 4 Press the shutter button all the way. ● The bottom of the memory gauge lights, the card access lamp blinks, and the camera begins storing pictures on the card. OK Memory gauge Card access lamp 78
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 79
    memory gauge lets you know if another shot is possible. Chapter 4 Before shooting/No picture taken One picture taken More than one taken No recordable camera is not used for over 3 minutes, the monitor turns off. If you operate the shutter button or zoom consumes more battery power than the viewfinder
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 80
    Chapter 4 Recording movies 1 Point the camera towards a subject while viewing through the monitor. Place the subject on the AF target mark. 2 Press the shutter button halfway. ● When focus and exposure (brightness)
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 81
    button all the way to stop recording. ● The card access lamp blinks and the camera begins storing the movie on the card. You cannot record another movie as long as the card access lamp is blinking. OK ● When the card access lamp stops blinking, the camera has finished writing the movie to
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 82
    mode, the default setting for is OFF. During movie recording, you can use the optical zoom unless is set to ON - in which case the optical zoom is not available. However, if DIGITAL ZOOM is set to ON, the digital zoom is available. Zoom - Telephoto/Wide-angle shooting Telephoto/Wide-angle shooting
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 83
    TIPS ● In the mode, the factory default setting of is OFF. During movie recording, you can only use the optical zoom. ● Zoom in/out during (movie record) mode When is set to ON in the menu during the mode, only digital zoom can function while shooting. For this reason, it is necessary to select the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 84
    pre-flashes. The subject's eyes appear red. ● After the pre-flash, it takes about 1 second before the shutter is released, so do not move the camera and hold it firmly. ● Effectiveness may be limited if the subject is not looking directly at the preflashes, or if the shooting range is too
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 85
    -light situations when in the flash off mode, the use of a tripod is recommended to prevent your pictures from being blurred by camera movement. Slow Synchronization SLOW1 SLOW2 SLOW The Slow Synchronization flash is designed for slow shutter speeds. Normally, when shooting with a flash, shutter
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 86
    . Using the Slow Synchronization flash Use the menu to select one of the 3 Slow synchronization flash modes above. In the top menu, select MODE MENU T CAMERA T SLOW T SLOW1, SLOW2 or SLOW. 86
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 87
    Chapter 4 Flash shooting (Cont.) Using the flash 1 Press the (flash mode) button repeatedly until the desired flash mode indication appears. ● The flash mode changes as follows (if all modes are available): Auto-flash (no indication) Red-eye reduction flash Control panel Fill-in flash Flash
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 88
    a bright subject, in the movie record mode, during Sequential shooting ( , camera shake problems (shutter speeds that are too slow can cause blur). However, if the zoom magnification is increased while the orange lamp is lit, the camera will increase the locked shutter speed accordingly. Zoom
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 89
    emission. Examples include small subjects, distant backgrounds, or situations when increased contrast is desired. In the top menu, select MODE MENU T CAMERA T . To increase the light emission, press Ñ. To decrease the light emission, press ñ. To complete the setting, press . Adjustable range Less
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 90
    5 Chapter Advanced shooting Advanced shooting methods such as metering modes and special effects let you take more creative pictures.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 91
    until (spot metering) or (spot metering+macro mode) appears on the control panel. Digital ESP (no indication) Control panel : Macro mode T P. 92 Spot metering 2 Take a picture. Supported working range Normal (except macro) : 0.8 m to ∞ (2.6 ft to ∞) Macro W : 0.1 m to 0.8 m (0.3 ft to
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 92
    - 0.8 m (0.3 ft - 2.6 ft)). With the zoom lever is pressed to the maximum W position, you can from the picture that the camera actually records. For macro mode shooting, the control panel. Digital ESP (no indication) Control panel Macro mode 2 Take a picture. Supported working range Normal (
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 93
    /remote control lamp ● The self-timer mode is not saved after the power is turned off even if All Reset is set to OFF (P. 146). ● The self-timer mode is canceled automatically when shooting is finished. ● In the mode, the camera automatically stops shooting when it goes over the maximum recording
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 94
    control 3 Point the remote control at the remote control receiver on the camera. For zooming, press the W or T button on the remote control. ● During operation, the camera's self-timer/remote control lamp blinks. Monitor side Remote control receiver Lens side Remote control receiver Self-timer
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 95
    may be too far from the camera. Move closer to the camera and press the shutter button again on the remote control. T There is signal interference. Change the signal as described in the remote control's instructions. ● How to cancel the remote control mode. T The remote control mode is not canceled
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 96
    speed is lower than normal sequential shooting. 1 In the top menu, select MODE MENU T CAMERA T DRIVET or . 2 Take pictures. ● Press the shutter button all the way and keep it pressed. The camera will take pictures in sequence until you release the button. ● Sequential shooting speed (HQ mode
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 97
    exposure compensation than by using the exposure setting considered optimal by the camera. When Auto bracket is set, exposure is changed automatically for each press . ● In some combinations of picture size and record mode (NORMAL/HIGH), only x3 is available. BKT 0.5 x3 1.0 x5 SELECT GO 97
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 98
    the ISO is set to over 200, noise may appear under some shooting conditions (P. 110). ● If the battery power is low and the battery check blinks during sequential shooting, shooting stops and the camera starts saving the pictures you have taken. Whether or not all of the shots are saved depends
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 99
    every time you take a picture. 1 In the top menu, select MODE MENU T CAMERA T 2 Press the shutter button. When recording starts, turn the camera microphone towards the subject you want to record. ● The sound recording screen appears. T ON. Microphone Factory default setting: OFF ● If the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 100
    MENU T CAMERA T 2 Shoot. Factory default setting: OFF T ON. TIPS ● During playback, sound is output from the speaker (P. 131). ● Sound can be added later to still pictures (P. 132). Recorded sound can also be changed. Speaker ● During movie recording, you can only use the digital zoom. If is
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 101
    Olympus CAMEDIAbrand SmartMedia cards. (Non-Olympus cards do not support this feature.) Panorama shooting lets you connect images with overlapping edges into a single panoramic image, using the provided CAMEDIA Master software. 1 In the top menu, select MODE MENU T CAMERA adjust the zoom after the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 102
    disabled. ● The Panorama mode is only available with the OLYMPUS CAMEDIA-brand SmartMedia cards. ● The camera itself cannot edit panorama pictures. To connect each picture, the CAMEDIA Master software is necessary. ● Your computer's memory may be insufficient if you take too many panorama pictures
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 103
    WHITE BOARD, but for white letters on black backgrounds. Reverses blacks and whites in the image. In the top menu, select MODE MENU T CAMERA T FUNCTION T Select a mode. Modes & Function shooting Mode Function shooting All modes BLACK & WHITE, SEPIA Factory default setting OFF OFF TIPS ● If
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 104
    6 Chapter Adjusting image quality and exposure
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 105
    memory capacity is under various conditions (such as different resolutions, compressions, or file formats), refer to the table on page 106. The numbers in the table are approximate. Record are smaller, so more images can be saved to a card. Like SHQ, resolution can be increased by using the Enlarge
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 106
    16/15 32/31 8/8 16/16 10/10 21/21 13/12 26/25 7/7 14/14 20/19 40/39 11/11 23/22 32/30 64/60 18/17 36/34 49/45 99/90 27/26 55/ low compression/NORMAL uses normal compression Movie Record Modes Memory capacity in sec. per movie Record mode HQ SQ Resolution 8MB 16MB over
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 107
    NORMAL, SQ2: 640 x 480 NORMAL 1 P A/S/M : In the top menu, select MODE MENUTPICTURET , then press í. : Select in the top menu. 2 Press Ññ to select the desired record mode (refer to the table on the previous page), then press í. : Press Ññ to select HQ or SQ, then go to step 4. 3 Press Ññ to select
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 108
    the number of pictures that can be saved to a card will be fewer. ● Resolution and picture size on a the picture only takes up part of the screen. ● Compression rate In record modes other than TIFF, (P. 105) This camera saves images with either TIFF or JPEG formats. In record modes other than TIFF
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 109
    . ● The number of storable images differs depending on the Record mode, the card's memory size, the Preset print or the Sound recording. ● Areas using PAL (P.199) T If movie pictures are shot with the video cable connected, their maximum recording time may be different from the table on page 106
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 110
    higher values also produce more "noise" in the resulting images. In the top menu, select MODE MENU T CAMERA T ISO. There are 4 choices of ISO: AUTO, 100, 200, or 400. Choose the best one for your shooting conditions. AUTO : Sensitivity is automatically adjusted according to the lighting conditions
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 111
    to make fine changes to the present exposure setting. In some situations, you may get better results when the exposure that the camera sets is compensated (adjusted) manually. You can adjust between +/-2.0 in 1/2 steps. When the setting is changed, you can check the result on the monitor. Adjusts
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 112
    useful when you need more precise white balance than PRESET WB can give. To set the proper white balance for the shooting conditions, point the camera at a white object under the light source you want to use and adjust the white balance. 112
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 113
    6 White Balance (Cont.) 1 Select page. ● The appears. as shown on the previous ONE TOUCH WB screen ONE TOUCH WB screen ONE TOUCH WB 2 Point the camera at a sheet of white paper. ● Position the paper so that it fills the screen entirely. Be sure there is no shadow or background showing around
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 114
    Chapter 6 White Balance (Cont.) White Balance Adjustment This function allows you to make fine changes to the white balance. In the top menu, select MODE MENU T PICTURE T . Press í. The white balance adjustment indicator appears on the screen. The color becomes bluer each time you press Ñ,
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 115
    Chapter 6 Sharpness This function adjusts the sharpness of images. In the top menu, select MODE MENU T PICTURE T SHARPNESS. Press í. Sharpness can be adjusted between +5 and -5 using Ññ. The outlines of images are more emphasized, and the images themselves look more vivid, making this ideal for
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 116
    Chapter 6 Contrast This function adjusts the contrast of images. For example, images with strong differences in light and shadow can become milder, while those with weaker differences can become more vivid. In the top menu, select MODE MENU T PICTURE T CONTRAST. Press í. Contrast can be adjusted
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 117
    . When shooting night scenes, shutter speeds become slower and noise tends to appear on images. When noise reduction is set to ON, the camera automatically reduces noise to produce clearer images. However, shooting time is approximately twice as long as usual. Noise reduction can only be used when
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 118
    7 Chapter Playback This chapter explains how to play back still pictures or movies, and how to use the various functions available during playback.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 119
    Playback Plays back one picture. 1 Press the (monitor) button with the lens barrier closed. ● The monitor turns on and displays the last picture taken frames ahead. Quick View This function lets you play back pictures while the camera is in the shooting mode. This is useful when you want to check
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 120
    is not displayed until the sound playback of the previous picture ends. ● Use of the AC adapter (optional) is recommended when running the slideshow for long periods of time. If batteries are being used, the camera will end the slide-show after about 30 minutes and enter sleep mode. ● The slide
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 121
    play back or edit movies. 1 Press the (monitor) button with the lens barrier closed, and use the arrow pad to select a picture with MENU 3 Press Ñ. The card access lamp starts blinking and movie data in the card is sent to the camera (downloading). ● The MOVIE and record mode of the movie. 121
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 122
    again. FRAME BY FRAME: FRAME BY FRAME Plays back the movie manually. EXIT: EXIT Leaves the movie playback mode. To play back other Press to start your choice. ● When FRAME BY FRAME is selected, follow the instructions below. ● When EXIT is selected, the MOVIE PLAY screen appears. To exit, press
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 123
    the card as still pictures. Indexes are not stored in the same record mode as movies (see below). Record mode when the movie is shot HQ SQ Record mode ● The card access lamp blinks during downloading. ● " CARD FULL" (P. 193) appears if there is not enough memory left on the card. GO First
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 124
    INDEX screen appears. INDEX screen INDEX O K RESET CANCEL OK: Saves the index on the card. The menu disappears from the screen. RESET: Resets the index. Returns to the first- É. ● INDEX is not available when the card is protected or when " CARD FULL" appears (indicating insufficient memory). 124
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 125
    parts you do not want. 1 Follow steps 1-3 on page 121. 2 Press Ññ to select EDIT on the MOVIE PLAY screen. ● The first-frame selection screen appears. First-frame selection screen ● The card access lamp blinks during downloading. ● " CARD FULL" (P. 193) appears if there is not enough memory
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 126
    exit, press É. ● When OK is selected, press Ññ to select NEW FILE or OVERWRITE, then press . The movie is edited. ● EDIT is not available when the card is protected or when " CARD FULL" appears (indicating insufficient memory). ● NEW FILE is not available when the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 127
    Chapter 7 Displaying Shooting Information This function lets you select how much shooting information is on the monitor in the playback mode. When it is set to OFF, only a small amount of information is displayed. For details on each piece of information displayed, see pages 19 and 20. 1 Press to
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 128
    2.5, 3, 3.5 or 4 times. 1 With the arrow pad, select the picture you want to enlarge. ● Pictures with the mark cannot be enlarged. 2 Turn the zoom lever toward T ( ). ● When a picture is enlarged are displayed. Press the arrow corresponding to the direction you want to view. The enlarged picture is
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 129
    the best ones. The number of pictures shown can be 4, 9, or 16 (see the next page). In the single-frame playback mode (P. 119), press the zoom lever to W ( ). Index display (9-frame) Pictures, including the one displayed in the single-frame playback mode, appear in the index display. Ⅵ How to use
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 130
    Chapter 7 Index Display (Cont.) TIPS ● How to view a full-size picture from the index TSelect the picture with the arrow pad, then press the zoom lever toward T. Selecting the Number of Pictures This function lets you change the number of pictures in an index display. 1 In the top menu, select
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 131
    SETUP CARD PLAY Chapter 7 Ajusting playback sound volume During playback, you can adjust the volume of the sound output from the speaker, as well as the volume
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 132
    erased. ● function is not available when the card is protected or when " CARD FULL" appears (indicating there is no memory left). ● Sound may not be recorded when a card has insufficient memory. ● Sound recording may also pick up camera noises (e.g. buttons clicking, shutter movement, etc.). ● After
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 133
    the ALL ERASE (all-frame erase) function, but they can be deleted with the FORMAT (format) function. ● Protection cannot be applied to pictures stored on a card with a writeprotect adhesive seal. ● Pictures cannot be protected while being played back on a TV. 133
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 134
    Chapter 7 Erasing Pictures Recorded pictures can also be erased. This can be done either one frame at a time or to all the pictures in the card. ● It is not possible to erase protected pictures or pictures stored on a card that has a write-protect seal. ● Once erased, pictures cannot be restored.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 135
    7 Erasing Pictures (Cont.) All-Frame Erase This function erases all still pictures and movies in the card, except protected ones (P. 133). 1 In the top menu, select MODE MENU T CARD T CARD SETUP T ALL ERASE. 2 Press . ● The ALL ERASE screen is displayed. ALL ERASE YES N O SELECT GO ALL
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 136
    is formatted. Make sure that you save or transfer important data before formatting a used card. ● Recording time may be longer with non-OLYMPUS cards and computerformatted cards. In such cases, re-formatting with the camera is recommended. ● Cards with a write-protect seal cannot be formatted. 136
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 137
    ● For details on switching to video input, refer to your TV's instruction manual. 4 Select an image by using the arrow pad. ● The selected image will be displayed on the TV. TIPS ● The optional AC adapter is recommended when using the camera with a TV. ● Images can be rotated only when they are
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 138
    when you want to rotate a picture. For example, pictures taken with the camera held vertically are also oriented vertically (i.e. longer vertically than horizontally). With picture be rotated: Protected pictures; Pictures in a card with a write-protect seal; Pictures taken with other cameras. 138
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 139
    8 Chapter Useful Functions This chapter explains various useful camera functions. Also see "Using the Menu" in Chapter 3.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 140
    Chapter 8 SETUP CARD PIC CAM MY MODE SETUP Your favorite settings can be saved in MY MODE SETUP. When the mode dial is set to , the customized settings are activated. When the camera is in the P or A/S/M mode, you can also save some of the settings you are using in MY MODE SETUP
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 141
    the aperture on the CUSTOM screen. CUSTOM screen CUSTOM FNo SHUTTER Press í to go to the aperture setting screen. CUSTOM FNo SHUTTER LCD OFF ZOOM LCD ZOOM Press to save the setting. The monitor then returns to the previous screen. Increases the value Decreases the value 6 When you have made
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 142
    65) F2.8 SHUTTER (P. 66) 1/750 (P. 111) ZOOM* ±0 35mm FLASH MODE (P. 87) AUTO (P. 91 Setting Factory default setting NOISE REDUCTION (P. 117) OFF DIGITAL ZOOM (P. 82) OFF FULLTIME AF (P. 72) OFF 116) ±0 * In the mode, available zoom positions are 35mm/50mm/70mm/98mm (these numbers are
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 143
    Single-frame), (Sequential), (AF Sequential), BKT ISO (P. 110) AUTO, 100, 200, 400 P/A/S/M (P. 65 - 68) P, A, S, M (P. 89) +2 - ±0 - -2 SLOW (P. 86) SLOW1, SLOW, SLOW2 NOISE REDUCTION (P. 117) OFF, ON DIGITAL ZOOM (P. 82) OFF, ON FULLTIME AF (P. 72) OFF, ON (for still pictures) (P. 99
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 144
    Chapter 8 Shortcut (Cont.) Setting the Shortcut Menu Assign settings to the A, B and C positions on the top menu. A B MODE MENU C 1 In the top menu, select MODE MENU T SETUP T SHORT CUT. Press í. ● The SHORT CUT screen appears. ● The A, B, and C positions on the monitor are the same as top,
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 145
    SET CARD PIC CAMERA Chapter 8 Shortcut (Cont.) Using the Shortcut Menu 1 Press to Ex: When DIGITAL ZOOM is set to the A shortcut. Press this button. DIGITAL ZOOM MODE MENU WB SLOW NOISE REDUCTION DIGITAL ZOOM FULLTIME AF Pressing Ñ takes you directly to the DIGITAL ZOOM setting screen.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 146
    Chapter 8 All Reset This function lets you choose whether or not the camera saves its current settings. OFF: The settings made just before the power is turned off are saved. ON: All settings are returned to the factory
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 147
    (P. 86) SLOW1 Setting Factory default setting NOISE REDUCTION (P. 117) OFF DIGITAL ZOOM (P. 82) OFF FULLTIME AF (P. 72) OFF (for still pictures) This sets the monitor's ON/OFF when the camera is turned on. The monitor may not turn with some camera settings. In this case, press to turn
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 148
    Chapter 8 Beep You can set the volume of the beep used for button operations or warnings to OFF, LOW or HIGH. The factory default setting is LOW, but you can turn the beep completely off if you don't want it. In the top menu, select MODE MENU T SETUP T BEEP T OFF, LOW or HIGH. Factory default
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 149
    Chapter 8 Shutter sound effect It is possible to select the type of shutter sound effect and the shutter sound volume. Sound volume cannot be set unless a shutter sound effect type is selected. 1 In the top menu, select MODE MENU T SETUP T SHUTTER SOUND. Press í. ● The SHUTTER SOUND screen appears
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 150
    . 1 : Factory default setting 2 : Another sound type ● In the mode, this function's setting is the same as that selected in the other shooting modes. ● If the battery check indication appears when the power is turned off, the shutdown image may not appear. 150
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 151
    displayed in Step 2. 5 To exit from the SCREEN SETUP screen, press É. ● It is not possible to register pictures that cannot be played back on this camera. No movie frames can be played back. 151
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 152
    taken. Pressing the shutter button halfway at any time displays the image the camera is currently aimed at. Ⅵ OFF The image being recorded onto the card is not displayed. If you shoot while using the monitor, the subject the camera is pointing at will be displayed. This is useful when you want to
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 153
    Chapter 8 Sleep timer The camera automatically enters the power saving mode if the time you have set has sleep timer is always set at 3 minutes. ● Sleep does not work when using the AC adapter. ● If a slide-show lasts more than 30 minutes, the camera automatically enters the sleep mode. 153
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 154
    for you when transferring images to a computer. Ⅵ RESET When RESET is selected, the file number and folder number are reset every time a new card is inserted in the camera. The folder number returns to No. 100, and the file number returns to No. 0001. This is useful when grouping files on separate
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 155
    both Folder/File No. reach each maximum number (999/9999)... The number of storable pictures becomes 0, even if the card is not full yet. No more pictures can be taken. Replace the card with a new one. ● In the , , , , , or mode, this function's setting is the same as that selected in the other
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 156
    Pixel Mapping The Pixel Mapping feature allows the camera to check a CCD and image processing circuit Pixel Mapping. ● When Pixel Mapping is finished, the screen returns to normal. SETUP CARD PIC CAM SETUP CARD PIC CAM REC VIEW MY MODE SETUP SLEEP FILE NAME PIXEL MAPPING ON 3MIN RESET REC
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 157
    Chapter 8 Measurement units: m/ft (meters/feet) Measurement units can be selected from either meters or feet in the manual focus mode. (P. 73) At close ranges, the camera replaces meters/feet with centimeters/inches. In the top menu, select MODE MENU T SETUP T m/ft T m or ft. Factory default
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 158
    9 Chapter Print setting Print reserve prepares pictures you have taken with the camera for printing at a photo lab or on your printer.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 159
    printing service labs or a personal DPOF-compatible printer. Ⅵ Printing on an Olympus CAMEDIA P-400, P-330N(E) or P-200 digital printer If you insert a card with Print Reserve data into the printer, printing is possible without using a computer. For more details, refer to the printer's instructions
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 160
    record mode) (P. 105). ● Images taken with this camera can also be printed using a printer or at a photo lab that supports the Design rule for Camera File system/DCF. ● DPOF reservations set by another device cannot be changed by this camera. Make changes using the original device. ● If a card
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 161
    ORDER screen appears. PRINT ORDER SETTING PRINT ORDERED RESET PRINT ORDER KEEP EXIT SELECT GO If Print Reserve data is already stored on the card, the PRINT ORDER SETTING screen appears giving you the choice of resetting the data or keeping it (P. 167). EXIT SELECT GO Select . 3 Press Ñ or
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 162
    . ● The PRINT ORDER screen appears. PRINT ORDER SETTING PRINT ORDERED RESET KEEP EXIT SELECT GO If Print Reserve data is already stored on the card, the PRINT ORDER SETTING screen appears giving you the choice of resetting the data or keeping it (P. 167). PRINT ORDER EXIT SELECT GO Select
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 163
    Chapter 9 Single-frame print reserve (Cont.) 5 In the screen, set x (number of prints), (date/time) and (trimming). When setting is complete, press . ● A picture is played back. Increases the number. 0 DATE NO EXIT SELECT GO Select x (number of prints) or (date/time). Decreases the number. To "
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 164
    Chapter 9 Trimming setting It is possible to enlarge a part of a recorded picture and to print out the enlarged section only. 1 Do steps 1 horizontal lines using one of the following methods: When the zoom lever is moved toward W, the intersection point (green) moves toward the top left corner of
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 165
    for setting the bottom right corner point. The methods for moving the vertical and horizontal lines are the same as described in step 2. When the zoom lever is moved toward W, the intersection point (green) moves toward the top left corner of the display. When the lever is moved, frame lines (white
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 166
    the TIFF, SHQ or HQ mode. ● The vertical to horizontal ratio in the trimming screen can be changed using the arrow pad, but if the zoom lever is used, the ratio is fixed at 4:3. 166
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 167
    you to reset all Print Reserve settings for pictures stored on a card. 1 Play back a still picture. Press to display the top ORDER SETTING screen by pressing ñ. ● If Print Reserve data is NOT stored on the card, the PRINT ORDER SETTING screen does not appear. 3 Select RESET. PRINT ORDER SETTING
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 168
    10 Chapter Transferring pictures to a computer Pictures stored on the card can also be viewed on a computer. This chapter shows you how to transfer pictures to a computer for viewing and image processing.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 169
    time. Follow the chart below. Identifying the OS (P.171) ᮢ Windows 98/98 SE ᮢ Windows 2000 Professional/Me ᮢ Mac OS 9.0 - 9.1 ᮢ Read the provided "SOFTWARE INSTALLATION GUIDE". ᮢ ᮢ Connecting the camera to a computer using the USB cable (P.173) ᮢ ᮢ Confirming the computer recognizes the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 170
    Cont.) ● If the AC adapter is disconnected or connected while the camera is connected to a computer and is used with the battery loaded, image data stored on the card may be destroyed or the computer and/or camera may malfunction. Before disconnecting/connecting the AC adapter, be sure to disconnect
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 171
    Chapter 10 Transferring images to a computer (Cont.) Identifying the OS Identify the OS on your computer before connecting the camera. How to identify depends on the computer. Windows 1 Double-click the "My Computer" icon on your desktop. 2 Double-click the "Control Panel" icon. 3 Double-click the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 172
    10 Transferring images to a computer (Cont.) 4 A System Properties window will pop up. Note and record the "System:" information. ● Close the window. If your OS is Windows98/98 SecondEdition, read the provided "SOFTWARE INSTALLATION GUIDE". Macintosh Select "About This Computer" from the Apple menu
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 173
    the camera as a new device, and a window to install the USB driver appears. Press "CANCEL" to close this window. Disconnect the camera from the computer, and install the USB driver as shown in the provided "SOFTWARE INSTALLATION GUIDE". If the USB driver is already installed, this window will
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 174
    10 Transferring images to a computer (Cont.) Confirming the computer recognizes the camera When using Windows 2000 Professional/Me 1 When the camera is connected to a computer, the computer automatically installs the USB driver. Click "OK" when a message appears saying that the installation is
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 175
    still in the card. Note on using CAMEDIA Master 2.5 software ● When using CAMEDIA Master 2.5, click on "Removable Disk", not "My Camera". Under Mac OS, the disk drive will be labeled "Untitled". ● To use CAMEDIA Master software, read its instructions. Windows 1 Connect the camera to the computer
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 176
    connect again. 4 Double-click the "DCIM" folder. ● The card in the camera is recognized as a folder. 5 Double-click the "100OLYMP" instructions provided by your computer. ● To play back movies, the personal computer should have QuickTime installed on it. ● Install QuickTime from the provided software
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 177
    Note: The Apple "File Exchange (PC Exchange)" software must be installed in Extensions Manager for a drive icon to be mounted on the desktop. Please consult Apple Computer Inc. for instructions. 3 Double-click the"DCIM" folder. ● The card in the camera is recognized as a folder. 4 Double-click
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 178
    folder, drag & drop them. ● When moving or copying a file, be sure to follow any instructions provided by your computer. Drag & drop ● Always disconnect the camera from the personal computer when doing any of the following: - Changing the card. - Switching the mode dial position. - Turning off the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 179
    avoid computer malfunctions, always do the following when removing the USB cable. If a malfunction occurs, disconnect the USB cable and re-connect it and/or re-start your personal computer. Windows 98/98 SE 1 Make sure the camera's card access lamp is off. OK 2 Select the "Removable Disk" icon
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 180
    list, then click on the "Stop" button. 3 When a message appears saying that the hardware can be ejected safely, click on the "OK" button. 4 Remove the USB cable. ● If the window returns the following message when attempting to disconnect the camera, close all applications and try again. 180
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 181
    slot (PCMCIA) or an external PC card reader/writer PC card adapter Personal computer Olympus-brand removable media equipped with a USB port reader/writer Note: ● Check for compatibility. Depending on the computer operating environment and/or the card memory capacity, the above devices may not
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 182
    11 Chapter Using optional accessories
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 183
    optional Olympus CAMEDIA-brand AC adapter allows you to power your digital camera from a common AC wall outlet. Be sure to use the specified AC adapter. Use an AC adapter designed to operate on the AC voltage in the area the camera is being used. Consult your nearest Olympus dealer or Service center
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 184
    12 Chapter Miscellaneous This chapter includes helpful information about troubleshooting camera operations, error codes, etc.
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 185
    shooting in the mode. 1 Open the lens barrier. P. 30 2 Wait until there is room in the memory gauge. 3 Release your finger from the shutter button. When the orange lamp stops blinking, shoot again. 4 The recorded movie image data is being written to the card. You can start shooting again when the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 186
    problem with the card. 6 The card is full. 7 The batteries ran out of power. 8 The control panel/ monitor indications disappear, or only the battery check blinks. 9 A write-protect adhesive seal is placed on the card or there is no card in the camera. 5 See the error code chart. 6 Replace the card
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 187
    in the shooting mode. 2 There is no picture in the card. 3 There is a problem with the card. 4 The camera is connected to a TV. 1 Close the lens barrier and press the button. 2 NO PICTURE appears on the monitor. Record pictures. 3 See the error code chart. 4 The monitor does not function when the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 188
    1 Connect the cable correctly. P. 173 2 Replace the batteries with new ones or use the optional AC adapter. 3 For Windows 98/98 SE users: Install the USB driver again following the provided "SOFTWARE INSTALLATION GUIDE". P. 25, 183 The subject's eyes appear red in pictures recorded with the flash
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 189
    AF target mark on the subject, or use the focus lock. 3 Clean the lens with a soft dry cloth. 4 Press the shutter button while looking into the viewfinder, not while standing in front of the camera. 5 Use the right manual focus for the distance. P. 36, 68 P. 68, 71 P. 192 P. 93 P. 73 The picture
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 190
    Chapter 12 Troubleshooting (Cont.) POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE The picture is too dark . P. 112 P. 87 P. 112 The picture has obscured edge(s). 1 The lens was partly blocked by a finger or the strap. 1 Hold the camera correctly, keeping your fingers and the strap away from the
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 191
    Troubleshooting (Cont.) POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE Halation produces unnatural colors in a picture. 1 Excessively bright ultraviolet light on the subject, such as sunlight shining through the leaves of trees, window using a graphics application that supports JPEG (Paint Shop Pro
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 192
    use When not using the camera, be sure to close the lens barrier to turn off the camera. Also turn off the monitor. Cleaning the camera 1 Turn off the camera. (P. 30) 2 Remove the batteries (P. 25). When using the AC adapter, unplug the AC adapter from the camera and the AC outlet. 3 Exterior Wipe
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 193
    this card. The recorded image cannot be played back with this camera. If the card is dirty, wipe the gold contacts with a clean tissue and insert it again. If the problem is still not corrected, this card cannot be used. Download the image to a personal computer and use image processing software to
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 194
    or erase unneeded pictures. The card cover Close the card is open. cover. CARD-COVER OPEN Empty screen The temperature inside the camera is too high. Remove the battery and wait until the camera cools down. Consult your nearest Olympus dealer or customer support department (see back cover
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 195
    type Recording System Still Memory Sound with still images Movie No. of storable pictures (When a 16 MB card is used) No. of effective pixels Image pickup device Recording image resolutions Lens Photometric system Aperture Digital camera (for shooting and displaying) Digital recording, JPEG
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 196
    batteries, Alkaline batteries or lithium batteries. AC adapter (optional) Manganese (zinc-carbon) batteries cannot be used. 87 mm x 68.5 mm x 43.5 mm (3.4" x 2.6" x 1.7") 190 g (0.4 lb) (without batteries/card) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 197
    light passing through the lens into electrical signals. On this camera, light is picked up recording images using silver halide (the method for recording images in conventional, non-digital photography.) This system is in contrast to still video and digital photography. DCF (Design rule for Camera
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 198
    digital cameras. By entering which images to print and the number of copies of each, the user can automatically have the desired images printed by a printer or print lab that supports the DPOF format. Eclipsing (Vignetting) This refers to when an object obscures part through the lens (aperture).
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 199
    images. Photographs (images) shot using this camera are recorded onto the SmartMedia card in JPEG format when the Record mode is set to SHQ, HQ or software programs for scanners and graphics applications. TTL (Through-The-Lens) System To help adjust exposure, a light receptor built into the camera
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 200
    AC adapter 183 AC outlet 183 Adjusting the monitor brightness 79 AF sequential shooting 96 All-frame print reserve 161 Aperture 65, 67 Assigning the mode to A/S/M 65-68 Auto flash 84 Auto focus 69 Auto bracket 97 A/V output 137 B Battery 25-27 Beep 148 Built-in memory 79, 81 C CAMEDIA
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 201
    CAMERA, FUNCTION ......51, 103 Menu, PICTURE 51 PICTURE, (record mode 51, 105 PICTURE, WB (white balance 51, 112 PICTURE 51, 114 PICTURE, SHARPNESS....51, 115 PICTURE, CONTRAST ......51, 116 PICTURE, SATURATION ..51, 116 Menu, CARD 51 CARD, CARD , CARD SETUP 56 Menu 56 Menu, DIGITAL ZOOM 56
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 202
    Index (Cont.) Chapter 12 R Record mode 105 Recording movies 64, 80 Red-eye reduction flash 84 Remaining battery power ........14, 26 Removable media reader/writer ..181 Resetting print reserve 167 112 White balance, (One touch white balance 112, 113 Wide-angle shooting 82 202 Z Zoom 82
  • Olympus D-40 | D-40 Zoom Reference Manual (5.7MB) - Page 203
    pm (Monday to Friday) ET E-Mail: [email protected] Olympus software updates can be obtained at: http://olympus.com/digital/ Adobe [Photoshop] Support Adobe software updates and technical information can be obtained at: http://www.adobe.com/support/ OLYMPUS OPTICAL CO. (EUROPA) GMBH. Premises/Goods
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
±
Thank you for purchasing an Olympus digital camera. Before you
start to use your new camera, please read these instructions
carefully to enjoy optimum performance and a longer service life.
Keep this manual in a safe place for future reference.
±
We recommend that you take test shots to get accustomed to
your camera before taking important photographs.
REFERENCE MANUAL