Netgear R6120 Installation Guide

Quick Start

AC1200 WiFi Router

Model R6120

Unplug your modem, remove and replace the backup battery if it uses one, and

then plug the modem back in. Use the Ethernet cable to connect the modem to

the blue Internet port on the router.

Note:

If your Internet connection does not require a modem, connect your main

Ethernet cable to the blue Internet port on the router.

Connect the router to a power source. The router’s Power LED

lights green

when the router is ready.

Make sure that the router’s WiFi LED

is lit. Look on the router label for the

preassigned WiFi network name (SSID) and network key (password).

Open the WiFi connection manager on your computer or other WiFi-enabled

device, find the router’s WiFi network name, and use the router’s password to

connect.

Launch a web browser. If the NETGEAR installation assistant does not display, visit

www.routerlogin.net

. If a login window displays, enter

admin

for the user name

and

password

for the password. Follow the onscreen instructions.

The router’s Internet LED lights

green when the router is connected to the

Internet.

For the best WiFi performance, position the antennas as shown.

Router

Power adapter

(varies by region)

Ethernet cable

2. Restart Your Modem and Plug In Your Router

3. Connect to the Internet

1. Position the Antennas

Package Contents