Netgear ANT24501B Installation Guide

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to

change without notice. © NETGEAR, Inc. All rights reserved.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR ANT24501B Antennas

Package Contents

•

Two 5G antennas

•

Two 2.4G antennas

Install Your Antennas

The ANT24501B antennas are intended for use with the NETGEAR Outdoor

High Power Wireless N Access Point WND930.

¾

To install your antennas:

1.

Remove the end caps from the antenna ports on the access point.

2.

Connect the antennas marked 5G to the

5G

antenna connectors.

3.

Connect the antennas marked 2.4G to the

2.4G

antenna connectors.

4.

Log in to the access point.

For more information about logging into the WND930, see the installation

guide.

5.

Configure the access point to use the external antennas.

For more information about configuring the access point, see the WND930

reference manual.