Nady American Performer™ User Guide
Nady American Performer™ Manual
 |
View all Nady American Performer™ manuals
Add to My Manuals
Save this manual to your list of manuals |
Nady American Performer™ manual content summary:
- Nady American Performer™ | User Guide - Page 1
USER GUIDE American Performer Dynamic Microphone Thank you for choosing the Nady American Performer™ Neodymium Dynamic Microphone. This versatile, professional-quality microphone is designed to provide top - Nady American Performer™ | User Guide - Page 2
the mixer. Service Information In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www problem you are experiencing. For service of a unit under warranty, please follow the instructions in the following section. Outside the U.S. For service
-
1 -
2
 |
 |
USER GUIDE
American
Performer
Dynamic Microphone
Precautions and Care
• The microphone should never be dropped or subjected
to extreme shock. Store only in a padded case to protect it
during transport
• Keep the microphone away from extremely high
temperatures (above 140˚F or 60˚C) and humidity and
avoid leaving it in direct sunlight for long periods of time
• When using the microphone outdoors, avoid getting it wet
• After use in a high-moisture application such as a stage
performance, wipe off the microphone with a dry cloth
and allow it to air dry
• Do not store the unit in a closed space (e.g., a plastic bag)
until all moisture has evaporated
Frequency Response
and Polar Pattern
Thank you for choosing the Nady American Performer
™
Neodymium Dynamic Microphone.
This versatile, professional-quality microphone is designed to provide top performance in all
live performance, and public address applications. Its true, transparent sound also makes the
American Performer microphone a valuable recording tool.
Features
Specifications
Element
Moving Coil
Dynamic Neodymium
Polar Pattern
Uni-directional Cardioid
Frequency Response
50Hz -15KHz (-3dB)
Sensitivity (@1kHz, 74dB S.P.L.)
-55dB V/Pa (4.5mV/Pa)
Impedance
600 ohms
Maximum S.P.L. (THD d1% 1KHz)
120dB
Connector
XLR balanced
Mic Cable
20’ (6m) 3-pin XLR to 1/4” TS
Dimensions (L x D)
7” x 2.1” (180mm x 52mm)
Weight
9.2 oz (260 g)
Material
Zinc alloy Die-cast zinc
Ballscreen
Steel mesh
Specifications subject to change at any time without prior
notice for purposes of product improvement
• Advanced high-output neodymium cartridge provides
maximum clarity and definition, even in noisy environments
• Unidirectional cardioid pattern reduces feedback
• Special-design internal cartridge mount for lowest handling
noise and quiet performance
• Withstands highest sound pressure
levels without overload or distortion
• Rugged, all-metal construction
• External On/Off switch on handle
• Includes 20 ft. microphone cable
-60
-70
-80
-90
(dBV/Pa)
-100
-110
-120
30
50
100
200 300
500
1k
2k
3k
5k
10k
20kHz