Motorola MK4000 Installation Guide
Motorola MK4000 - Micro Kiosk - 128 MB RAM Manual
 |
View all Motorola MK4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Motorola MK4000 manual content summary:
- Motorola MK4000 | Installation Guide - Page 1
This guide provides instructions for mounting the MK500 and MK4000 using Symbol Technologies Inc. Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application - Motorola MK4000 | Installation Guide - Page 2
the MK4000. Mounting zebra.com/weee. Service Information If you have a problem using the equipment, contact your facility's Technical or Systems Support. If there is a problem with the equipment, they will contact Zebra Support at: http://www.zebra.com/support For the latest version of this guide
-
1 -
2
 |
 |
MK500/4000 Mounting Kits
Installation Guide
© 2015 Symbol Technologies Inc.
Zebra reserves the right to make changes to any product to improve reliability,
function, or design.
Zebra does not assume any product liability arising out of, or in connection with,
the application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise
under any patent right or patent, covering or relating to
any
combination,
system,
apparatus,
machine,
material, method, or process in which Zebra products might
be used. An implied license exists only for equipment, circuits, and subsystems
contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www
.zebra.com/warranty
.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The
Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra
Technologies company.
© 2015 Symbol Technologies, Inc.
72-125097-02 Revision A — February 2015
Introduction
This guide provides instructions for mounting the MK500 and MK4000 using
the Wall Mount Kits and Pole Mount Kits.
Using the MK500 Wall Mount Kit
To mount the MK500 using the Wall Mount Kit:
1.
Determine the MK500 mounting location.
2.
Secure the mounting plate to the wall using the three wood screws
provided.
3.
Insert the four shoulder screws, also provided, into the mounting holes in
the back of the MK500.
4.
Connect the cables to the MK500 and route and secure them properly.
5.
Mount the MK500 by placing the shoulder screws through the four
keyholes on the mounting plate, and slide the MK500 down to secure in
place.
6.
Insert the locking screw through the hole in the tab at the top of the
mounting plate. Hand tighten the screw to secure the MK500.
Using the MK500 Pole Mount Kit
To mount the MK500 to a pole using the Pole Mount Kit:
1.
Connect the cables to the MK500 and route and secure them properly.
2.
Secure the mounting plate to the MK500 using the four shoulder screws
provided.
3.
Route the pole mount straps through the mounting bracket. Wrap them
around the pole and tighten.
4.
Mount the MK500 by placing the shoulder screws through the four
keyholes on the mounting bracket, and slide the MK500 down to secure.
5.
Insert the two locking screws through the holes in the tabs at the top side
of the mounting bracket. Hand tighten the screws to secure the MK500.
Locking Screw
Wood Screws (3)
Shoulder Screws (4)
Shoulder Screws (4)
Mounting Plate
Pole Mount Straps
Locking Screws (2)
Mounting Bracket