Motorola MC3000R User Guide

Motorola MC3000R - Win CE 5.0 Core 312 MHz Manual

Motorola MC3000R manual content summary:

  • Motorola MC3000R | User Guide - Page 1
    MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 2
  • Motorola MC3000R | User Guide - Page 3
    MC3000 User Guide 72E-68899-04 Revision A September 2007
  • Motorola MC3000R | User Guide - Page 4
    . The material in this manual is subject to change without notice. The software is provided strictly on an "as is" basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or
  • Motorola MC3000R | User Guide - Page 5
    to the original manual are listed below: Change -01 Rev A Date Dec. 2004 Initial Release Description -01 Rev B June 2005 Added Four Slot Ethernet cradle. Appendix A, added Accessory Specifications. -02 Rev A November 2005 Chapter 7, removed WZC, replaced with wireless application description
  • Motorola MC3000R | User Guide - Page 6
    iv MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 7
    ...xv Service Information...xv Chapter 1: Getting Started Introduction ...1-1 Unpacking the Mobile Computer ...1-1 Accessories ...1-2 Parts ...1-3 Rotating Scan Turret ...1-4 Mobile Computer Startup ...1-5 Install Main Battery ...1-5 Battery Charging ...1-7 Spare Battery Charging ...1-9 Stylus
  • Motorola MC3000R | User Guide - Page 8
    ...2-17 Task Manager ...2-17 Properties ...2-18 Entering Information ...2-19 Entering Information Using Keypad 2-19 Entering Information Using the Keyboard Input Panel 2-19 Entering Data via the Bar Code Scanner 2-19 Data Capture ...2-20 Laser Scanning ...2-20 Scan LED Indicators ...2-20
  • Motorola MC3000R | User Guide - Page 9
    Table of Contents vii Chapter 3: Using Bluetooth Introduction ...3-1 Security ...3-2 Turning the Bluetooth Radio Mode On and Off 3-2 Disabling Bluetooth ...3-2 Enabling Bluetooth ...3-3 Bluetooth Power States ...3-3 Cold Boot ...3-3 Warm Boot ...3-3 Suspend ...3-4 Resume ...3-4 Bluetooth Profiles
  • Motorola MC3000R | User Guide - Page 10
    ...5-1 Troubleshooting ...5-2 Mobile Computer ...5-2 Single Slot Serial/USB Cradle ...5-4 Four Slot Charge Only Cradle ...5-5 Four Slot Ethernet Cradle ...5-6 Four Slot Spare Battery Charger 5-6 UBC Adapter ...5-7 Cables ...5-8 Appendix A: Technical Specifications Mobile Computer And Accessory
  • Motorola MC3000R | User Guide - Page 11
    Table of Contents ix Appendix B: Keypad Functions/Special Characters Introduction ...B-1 Keypads ...B-1 Appendix C: Regulatory Introduction ...C-1 Accessory Power Supply Regulatory Compliance C-1 Glossary Index
  • Motorola MC3000R | User Guide - Page 12
    x MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 13
    is divided into guides that provide information for specific user needs. • Microsoft Application Guide - describes how to use Microsoft developed applications. • Symbol Application Guide - describes how to use Symbol developed applications. • MC3000 User Guide - describes how to use the MC3000
  • Motorola MC3000R | User Guide - Page 14
    or 48 CE 5.0 Core or key Professional MC3090G WLAN: 802.11a/b/g WPAN: Bluetooth Color or monochrome 32 MB RAM/ 64 MB Flash or 64 MB RAM/ 64 MB Flash 1D laser scanner or 2D imager Windows 28, 38 or 48 CE 5.0 Core or key Professional MC3090S WLAN: 802.11a/b/g Color WPAN: Bluetooth 64
  • Motorola MC3000R | User Guide - Page 15
    xiii Software Versions This guide covers various software configurations and references are made to operating system or software versions for > System Information icon > System tab. Fusion Software To determine the Fusion software version: Tap Wireless Strength icon > Wireless Status > Versions.
  • Motorola MC3000R | User Guide - Page 16
    use the accessories to charge the mobile computer. • Chapter 5, Maintenance and Troubleshooting, includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operation. • Appendix A, Technical Specifications
  • Motorola MC3000R | User Guide - Page 17
    available at: http://www.microsoft.com. For the latest version of this guide and all guides, go to: http://support.symbol.com. Service Information If you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. Contact information is available at: http://www
  • Motorola MC3000R | User Guide - Page 18
    xvi MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 19
    may include: • Standard battery (lithium-polymer) • Extended life battery (lithium-ion) • Cable(s) • Power supply • Cradles. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Enterprise Mobility Support immediately. See Service Information on page xv for
  • Motorola MC3000R | User Guide - Page 20
    1 - 2 MC3000 User Guide Accessories Table 1-1 lists the MC3000 accessories. Table 1-1 MC3000 Accessories Accessory Description Single Slot Serial/USB Cradle Charges the mobile computer main battery and a spare battery, and synchronizes the mobile computer with a host computer through either a
  • Motorola MC3000R | User Guide - Page 21
    or MC3090R) and the MC3090 Gun (MC3090G). For more information on the Rotating Scan Turret, see Figure 1-3 on page 1-4. Rotating Scan Turret Scan LED Indicator (red/green) Scan LED Indicators (red/green) Charge LED Indicator (amber) Keypad Beeper or Receiver (optional) Display Indicator LED Bar
  • Motorola MC3000R | User Guide - Page 22
    1 - 4 MC3000 User Guide Scan Window Headset Jack (optional) Headset Jack (optional) Scan Window Strap/Door Assembly Screws Strap/Door Assembly Stylus Stylus Holder Latches MC3000S MC3000R Figure 1-2 MC3000 Imager and MC3000 Laser Mobile Computers (Back View) Rotating Scan Turret The
  • Motorola MC3000R | User Guide - Page 23
    red/green) Charge LED Indicator (amber) Indicator LED Bar Scan Button Keypad Power Figure 1-4 MC3090G Mobile Computer Mobile Computer Startup To start using the mobile computer: • Install the main battery. • Charge the main battery and the backup battery. • Start the mobile computer. Install Main
  • Motorola MC3000R | User Guide - Page 24
    1 - 6 MC3000 User Guide CAUTION On the MC3090G battery, do not remove the battery pull tab. The pull tab is for enabling easy battery removal from the device. 3. Insert the battery into the slot, bottom first and press the battery gently into the slot. The battery clip locks the battery into place
  • Motorola MC3000R | User Guide - Page 25
    3 0.5 in. (12.7 mm) Battery Strap/Door Assembly 5 Figure 1-6 Main Battery Installation (MC3090G) Strap/Door Assembly Battery Charging CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. Use the mobile computer cradles, cables and
  • Motorola MC3000R | User Guide - Page 26
    must be charged within the 32° to 104° F (0° to +40° C) ambient temperature range. The following accessories can be used to charge batteries: • Cradles (and a power supply): • Single Slot Serial/USB Cradle • Four Slot Cradles. • Cables (and a power supply): • USB Client Charge Cable • Serial
  • Motorola MC3000R | User Guide - Page 27
    used to charge a spare battery: • Single Slot Serial/USB Cradle • Four Slot Spare Battery Charger • UBC Adapter. To charge a spare battery: 1. Connect the charging accessory to the appropriate power source. See Chapter 4, Accessories for setup instructions a cold boot. See Resetting the Mobile
  • Motorola MC3000R | User Guide - Page 28
    (or on a warm or cold boot) the Demo window appears. These sample/demo applications are intended to be used by application developers as application development examples. These applications were not developed to support end users. Refer to the Symbol Application Guide for information about the Demo
  • Motorola MC3000R | User Guide - Page 29
    have a pull tab, use the stylus to unclip the battery and then lift the battery. CAUTION On the MC3090G battery, do not remove the battery pull tab. The pull tab is for enabling easy battery removal from the device. Latches Strap/Door Assembly Hand Strap Battery Battery Clip Figure 1-10 Main
  • Motorola MC3000R | User Guide - Page 30
    1 - 12 MC3000 User Guide Latches 1 Strap/Door Assembly 2 3 0.5 in. (12.7 mm) Battery Pull Tab 4 4 Battery with Pull Tab Battery without Pull Tab Figure 1-11 Main Battery Removal (MC3090G) NOTE The SD card holder is located under the battery. To install the SD card, see Secure Device Card
  • Motorola MC3000R | User Guide - Page 31
    Mounting Clip Screws Mounting Clip Figure 1-12 Strap/Door Removal and Replacement (MC3000S/R) Strap/Door Assembly Removal and Replacement (MC3090G) The Strap/Door Assembly consists of a hand strap and the battery door. Before removing the Strap/Door Assembly, press the red Power button to turn
  • Motorola MC3000R | User Guide - Page 32
    1 - 14 MC3000 User Guide Button Latches Loop Strap/Door Assembly 0.5 in. (12.7 mm) Figure 1-13 Strap/Door Removal and Replacement (MC3090G) Turning Off the Radios On Device with CE 5.0 (OEM Version 01.15 or lower) NOTE To determine the operating system OEM version, see Configurations on
  • Motorola MC3000R | User Guide - Page 33
    or higher) NOTE To determine the operating system OEM version, see Configurations on page xii. WLAN Radio To turn off the WLAN radio tap the Wireless Connection Status icon on the task tray and select Disable Radio. A red X appears across the icon indicating that the radio is disabled (off
  • Motorola MC3000R | User Guide - Page 34
    1 - 16 MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 35
    Chapter 2 Operating the MC3000 Introduction This chapter provides basic instructions for using the mobile computer and navigating the mobile computer software. Power Button Press the red Power button to toggle the mobile computer between suspend and resume.
  • Motorola MC3000R | User Guide - Page 36
    2 - 2 MC3000 User Guide Keypad Special Functions The keypad special functions are color coded on the keypads. For example, on the 38-key keypad, the display contrast icon is blue indicating that the blue function key must be selected
  • Motorola MC3000R | User Guide - Page 37
    button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note, that keypad pressed with the down arrow key. See Resetting the Mobile Computer on page 2-28 for warm and cold boot procedures. Fn Press and release the blue
  • Motorola MC3000R | User Guide - Page 38
    2 - 4 MC3000 User Guide Table 2-2 20-Key Mechanical Keypad Descriptions (Continued) Key Description Numeric keys Produces 0 - 9 numeric characters. period C ESC ENTER Produces a (.) period. Produces a backspace. Exits the current operation.
  • Motorola MC3000R | User Guide - Page 39
    application function key by default. Red Circle Programmable application function key by default. Scan (yellow) Scroll Up and Down Used in scanning applications, press to scan a bar code. This key has the same function as activating the side mounted scan buttons. Moves up and down from one item
  • Motorola MC3000R | User Guide - Page 40
    2 - 6 MC3000 User Guide Table 2-3 28-Key Descriptions (Continued) Key Description Scroll Left and Right Moves left and right from one item to another. Increases/decreases specified values. Produces a
  • Motorola MC3000R | User Guide - Page 41
    Operating the MC3000 2 - 7 Table 2-3 28-Key Descriptions (Continued) Key Description ALPHA (orange) Press the orange ALPHA key to access the alternate ALPHA characters (shown on the keypad in orange). The icon appears on the taskbar. Press and release the orange ALPHA key again to return to the
  • Motorola MC3000R | User Guide - Page 42
    2 - 8 MC3000 User Guide 38-Key Keypad The 38-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer keypad
  • Motorola MC3000R | User Guide - Page 43
    Operating the MC3000 2 - 9 Table 2-4 38-Key Descriptions (Continued) Key Description Scan (yellow) Used in scanning applications, press to scan a bar code. Scroll Left and Right Scroll Up and Down Moves left and right from one item to another by default. Produces a TAB when the blue FUNC
  • Motorola MC3000R | User Guide - Page 44
    2 - 10 MC3000 User Guide Table 2-4 38-Key Descriptions (Continued) Key Description Comma Produces a comma by default. Produces alpha values when the orange ALPHA key is activated. Special Function/Alpha ...
  • Motorola MC3000R | User Guide - Page 45
    Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note, that keypad functions Unassigned application function key. Scan (yellow) Scan key, used for scanning applications. Orange Press the orange key to
  • Motorola MC3000R | User Guide - Page 46
    2 - 12 MC3000 User Guide Table 2-5 48-Key Descriptions (Continued) Key Description Numeric/Scroll/Select ... Numeric, scroll, select keys. Numeric by default. With the orange key activated, the 2, 4, 6, and 8 keys
  • Motorola MC3000R | User Guide - Page 47
    These applications were not developed to support end users. Refer to the Symbol Application Guide for the Demo window applications. Demo Window Figure 2-5 Demo Window Test Applications Window NOTE The Demo window is the factory default launcher menu. Application specific shells may vary. Desktop
  • Motorola MC3000R | User Guide - Page 48
    low. Indicates that the battery is fully charged and the mobile computer is running on external power. Indicates IP status. Only displays when the mobile computer is in emulation mode. Indicates that the ActiveSync application is running. Indicates that the wireless application radio is connected
  • Motorola MC3000R | User Guide - Page 49
    , then cold boot the mobile computer. 4. If after cold booting the mobile computer, the icon remains, install a new (tested and working) battery. 5. If the icon remains, return the mobile computer for servicing. Start Button Tap the Start button to launch the Start menu. • Programs: Use to access
  • Motorola MC3000R | User Guide - Page 50
    , p/n 72-68901-xx and the Microsoft® Applications User Guide for Symbol Devices, p/n 72E-68197-xx for application information. Windows CE .NET 5.0 Professional Windows CE .NET 5.0 Core Figure 2-9 Programs Menu Keyboard Input Panel Button Use the Keyboard Input Panel as an alternate input device
  • Motorola MC3000R | User Guide - Page 51
    Connection: Tap the Remote Desktop Connection icon to access the Remote Desktop Connection window. Task Manager and Properties Use the Task Manager to control an application's use and use the Properties functions to set display and clock options. Task Manager NOTE The 20-key mechanical keypad does
  • Motorola MC3000R | User Guide - Page 52
    2 - 18 MC3000 User Guide Properties 1. Tap Start > Control Panel > Taskbar and Start Menu ... . The Task Manager, Properties window displays, see Figure 2-10 on page 2-17. 2. Tap Properties to display
  • Motorola MC3000R | User Guide - Page 53
    keyboard) to enter text. • Scan bar code data into data fields. • Use Microsoft® ActiveSync® to synchronize or copy information from the host computer to the mobile computer. For more information on ActiveSync, refer to the MC3000 Integrator Guide. Entering Information Using Keypad The 28, 38 and 48
  • Motorola MC3000R | User Guide - Page 54
    2 - 20 MC3000 User Guide Data Capture The mobile computer has an integrated scanner or imager that collects data by scanning bar codes. Laser Scanning To scan bar codes with the mobile computer: 1. Ensure that the mobile computer is loaded with a scanning application. 2. If the mobile computer is
  • Motorola MC3000R | User Guide - Page 55
    tolerances to work within. NOTE Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless. Laser Decode Ranges The decode ranges provide the decode ranges for barcodes of specified densities. Figure 2-16 shows
  • Motorola MC3000R | User Guide - Page 56
    2 - 22 MC3000 User Guide Note: Typical performance at 73˚ F (23˚ C) on high quality symbols. MC3000 5 mil 2.0 4.9 22.86 12 30.48 26.4 30.6 25 30 35 63.5 76.2 88.9 Table 2-8 MC3000 Laser Decode Ranges Bar Code Density 5.0 mil 7.5 mil 10 mil UPC A Near 2.0 in 5.08 cm 1.6 in 4.06 cm 1.2 in
  • Motorola MC3000R | User Guide - Page 57
    -and-shoot operation. Imager The imager uses digital camera technology to take a digital picture of a bar code, the image is stored in memory the Scan button. Decode Mode This mode allows the user to decode a bar code when a single bar code in the mobile computer's field of view. In this mode
  • Motorola MC3000R | User Guide - Page 58
    - 24 MC3000 User Guide Pick List Mode Pick List mode allows the user to selectively decode a bar code when more than one bar code is in the mobile computer's field of view. By moving the aiming crosshair over the wanted bar code the user can selectively read only the required bar code. This feature
  • Motorola MC3000R | User Guide - Page 59
    Ranges The decode ranges provide the decode distances for barcodes of specified densities. Figure 2-21 shows the imager decode ranges and Table 2-9 on page 2-26 lists the scan ranges for the selected bar code densities. The minimum element width (or "symbol density") is the width in mils of the
  • Motorola MC3000R | User Guide - Page 60
    symbols. MC3000 5 mil 4.5 6.5 PDF417 6.67 mil 5.3 7.7 3.3 4.3 2.5 3.8 2.8 7.5 mil PDF417 10 mil UPC A 10.7 11.1 PDF417 15 mil 20 mil 14.2 14.4 in. 0 cm 0 5 10 15 12.7 25.4 38.1 Depth of Field Figure 2-21 MC3000 Imager Decode Ranges Table 2-9 MC3000 Imager Decode Ranges Bar Code
  • Motorola MC3000R | User Guide - Page 61
    2 - 27 Table 2-9 MC3000 Imager Decode Ranges (Continued) Bar Code Density Ranges Near Far PDF417 6.67 mil 5.3 in 13.46 elements of a symbol and the background. Dot Peening Laser Figure 2-22 Examples of Direct Part Marking To scan a DPM symbol using the imager: 1. Center the symbol in any
  • Motorola MC3000R | User Guide - Page 62
    erases all user stored records and entries from RAM. Never perform a cold boot unless a warm boot does not solve the problem. CAUTION Cold boot resets the mobile computer, to the default settings. All added applications and all stored data are removed. Do not cold boot without support desk approval
  • Motorola MC3000R | User Guide - Page 63
    from a USB device. No Yes A key is pressed. No Yes The scan triggered is pressed. No Yes The screen is touched. No No Wireless LAN activity is detected. No No File System Directory Structure The mobile computer directory structure displays all of the file folders. The pre-installed
  • Motorola MC3000R | User Guide - Page 64
    systems mapped using the network redirector. The files do not physically reside on the mobile computer. • The Temp and Recycled folders typically contain RAM based files. NOTE All files copied to the RAM based folders are lost after a cold boot. Connecting to the Internet on a Wireless LAN Network
  • Motorola MC3000R | User Guide - Page 65
    Operating the MC3000 2 - 31 Figure 2-25 Typical Internet Explorer (IE) Connection
  • Motorola MC3000R | User Guide - Page 66
    2 - 32 MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 67
    using frequency-hopping spread spectrum (FHSS) RF to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically .11b high-rate channels. AFH coexistence allows Symbol mobile computers to operate in any infrastructure.
  • Motorola MC3000R | User Guide - Page 68
    Guide class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space. NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required. Security The current Bluetooth specification
  • Motorola MC3000R | User Guide - Page 69
    Using Bluetooth 3 - 3 Figure 3-1 Disable Bluetooth Enabling Bluetooth To enable Bluetooth, tap Bluetooth icon > Enable Bluetooth. The Bluetooth icon changes to indicate that Bluetooth is enabled. Figure 3-2 Enable Bluetooth Bluetooth Power States Cold Boot When a cold boot is performed on the mobile
  • Motorola MC3000R | User Guide - Page 70
    MC3000 User Guide Suspend , it could take up to 10 seconds for the Bluetooth radio driver to re-initialize the radio. Resume When the mobile computer resumes, a number of Bluetooth services profiles. These profiles can be loaded or removed from memory. If a profile is not used, it can be removed
  • Motorola MC3000R | User Guide - Page 71
    Using Bluetooth 3 - 5 Modes The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users an example for using the Wizard to services for remote devices
  • Motorola MC3000R | User Guide - Page 72
    3 - 6 MC3000 User Guide Figure 3-5 Select Remote Device Window NOTE Devices discovered previously are listed to 6. Select Save As Favorite check box to save this service in the Favorite view. 7. In the Favorite Name text box, enter a name for this service that will appear in the Favorite list. 8. Tap
  • Motorola MC3000R | User Guide - Page 73
    Services on Remote Device • Pair with a Remote Device • ActiveSync via Bluetooth • Browse Files on Remote Device • Connect to Internet Using Access Point • Connect to Internet Using to users familiar with Bluetooth functionality. The menu bar provides quick access to the options and tools used to
  • Motorola MC3000R | User Guide - Page 74
    3 - 8 MC3000 User Guide You can also use the "tap and hold" technique to view available options. Scroll bars and view options are like Untrusted Devices - Discovered devices that are not bonded • Favorites - Selected services that are set as being Favorite for quick access. NOTE When switching
  • Motorola MC3000R | User Guide - Page 75
    Using Bluetooth 3 - 9 Figure 3-10 Discover Devices 5. The discovered devices display in the Untrusted Devices folder. Figure 3-11 Discovered Devices Listed in Untrusted Folder Bonding with Discovered
  • Motorola MC3000R | User Guide - Page 76
    3 - 10 MC3000 User Guide Figure 3-12 Pair a Remote Device 3. Select Pair from the pop-up menu. 4. On the mobile computer, the PIN Code Request window appears. Figure 3-13 PIN Code Request Window 5. In the PIN Code: text box, enter the PIN number (between 1 and 16 characters) and then tap OK. 6. On
  • Motorola MC3000R | User Guide - Page 77
    Using Bluetooth 3 - 11 Renaming a Bonded Device If it is necessary to rename a bonded device, it can be done from the BTExplorer window. 1. Launch BTExplorer. 2. Tap and
  • Motorola MC3000R | User Guide - Page 78
    3 - 12 MC3000 User Guide Figure 3-17 Delete a Bonded Device 3. A confirmation dialog appears. Tap Yes with the remote device the PIN Code Request window appears. Figure 3-18 PIN Code Request Window NOTE Connections to untrusted devices are a security risk. 3. In the PIN Code: text box, enter the same
  • Motorola MC3000R | User Guide - Page 79
    Bluetooth 3 - 13 Discovering Services Before services can be used, you must first discover remote devices and then bond to those devices. To determine what services are available on a bonded remote device: 1. Tap the Bluetooth icon and select Show BTExplorer. 2. In BTExplorer window, tap and hold
  • Motorola MC3000R | User Guide - Page 80
    3 - 14 MC3000 User Guide File Transfer Services NOTE Shared folders are a security risk. To transfer files between the mobile computer and another Bluetooth enabled device: 1. Ensure the mobile computer is discoverable and
  • Motorola MC3000R | User Guide - Page 81
    the remote device folder. 6. Tap and hold on the remote device and select Explore from the pop-up menu. 7. Tap and hold LAN Access using PPP service and select Connect from the pop-up menu. 8. The mobile computer connects with the Access Point. 9. Tap Start > Internet Explorer. The Internet Explorer
  • Motorola MC3000R | User Guide - Page 82
    3 - 16 MC3000 User Guide Prior to creating a connection, ensure the following: • Bluetooth phone is turned on. • Bluetooth phone is discoverable. (Some phones may also need to be pairable in
  • Motorola MC3000R | User Guide - Page 83
    Using Bluetooth 3 - 17 Figure 3-23 Network Log On Window 10. In the User name: text box, enter the user name for this connection. 11. In the Password: text box, enter the password for this connection. 12. In the Domain: text box, enter the domain
  • Motorola MC3000R | User Guide - Page 84
    you are calling. 5. In the Area Code text box, enter the area code. 6. In the Phone Number text box, enter the phone number. 7. Tap OK. OBEX Object Push Services Object Exchange (OBEX) is a set of protocols allowing objects such as pictures to be shared using Bluetooth. To exchange information with
  • Motorola MC3000R | User Guide - Page 85
    Using Bluetooth 3 - 19 Figure 3-25 OBEX Object Push Window 7. In the Action drop-down the other device to accept the picture. A Send Picture dialog appears. 12. Tap Ok. Headset Services To connect to a Bluetooth headset: 1. Ensure the mobile computer is discoverable and connectable. See Bluetooth
  • Motorola MC3000R | User Guide - Page 86
    the gain. 3. Tap OK. Serial Port Services NOTE By default, COM ports COM4, COM5 and COM9 are Bluetooth virtual ports. If an application opens one of these ports, the Bluetooth driver activates and guides you through a Bluetooth connection. Use the wireless Bluetooth serial port connection just as
  • Motorola MC3000R | User Guide - Page 87
    Using Bluetooth 3 - 21 Personal Area Network Services Connect two or more Bluetooth devices to share files, and hold Personal Area Network and select Connect in the pop-up menu. Bluetooth Settings Use the BTExplorer Settings window to configure the operation of the BTExplorer application. Tap Tools
  • Motorola MC3000R | User Guide - Page 88
    MC3000 User Guide Services Tab For security reason, by default services are not enabled. Use the Services tab to add or delete Bluetooth services. Figure 3-29 BTExplorer Settings - Services Tab To add a service: 1. Tap Add. The Add Local Service window displays. Figure 3-30 Add Local Service Window
  • Motorola MC3000R | User Guide - Page 89
    Local COM Port Local Baud Rate Local Port Options Displays the name of the service. Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Select the COM port. Select COM1 to use a modem or other device that is connected to the connector on the bottom of
  • Motorola MC3000R | User Guide - Page 90
    3 - 24 MC3000 User Guide OBEX Object Push Service OBEX Object Push allows contacts, business cards, pictures, appointments, and tasks to be pushed to the device by other Bluetooth devices. Figure 3-33 OBEX Exchange Information Window Service Name Service Security Do not allow clients to push
  • Motorola MC3000R | User Guide - Page 91
    Using Bluetooth 3 - 25 Service Security Support Group Ad-Hoc Networking Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Select to enable Ad-Hoc networking. Serial Port Service Serial port allows COM ports to be accessed by other Bluetooth devices.
  • Motorola MC3000R | User Guide - Page 92
    tab first, then select the individual service, then Properties. Figure 3-37 BTExplorer Settings - Security Tab Use PIN Code (Incoming Connecting) PIN Code Encrypt Link On All Outgoing Connections Select for automatic use of the PIN code entered in the PIN Code text box. It is recommended not
  • Motorola MC3000R | User Guide - Page 93
    in the area. Select either Automatic or manual. Deletes all discovered devices and link keys. Virtual COM Port Tab Use the Virtual COM Port tab to select Enable or disable COM Port 9 NOTE If an application uses one of the COM ports assigned to Bluetooth, opening this port causes the Bluetooth
  • Motorola MC3000R | User Guide - Page 94
    3 - 28 MC3000 User Guide Figure 3-40 COM Port Connection Miscellaneous Tab Figure 3-41 BTExplorer Settings - Miscellaneous Tab Highlight Connections Apply Text Style Apply Text Color Select the connection type
  • Motorola MC3000R | User Guide - Page 95
    mobile computers and provides Ethernet communication. Spare Battery Chargers • Four Slot Spare Battery Charger charges up to four MC3000 spare batteries. • UBC Adapter adapts the UBC2000 for use with the MC3000 batteries. NOTE The accessory power supply regulatory compliance statements are provided
  • Motorola MC3000R | User Guide - Page 96
    MC3000 User Guide SD CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The Single Slot to the MC3000 Integrator Guide. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative
  • Motorola MC3000R | User Guide - Page 97
    Bar Charge LED Indicator (amber) Mobile Computer Slot Spare Battery Charging LED USB Port Serial Port Accessories 4 - 3 Spare Battery Spare Battery Charging Slot Battery the battery clip and lift the battery out of the slot. LED Charge Indications The Single Slot Serial/USB cradle uses the mobile
  • Motorola MC3000R | User Guide - Page 98
    4 - 4 MC3000 User Guide Table 4-1 LED Charging Status Indicators LED Indication Mobile Computer LED flashes once if the battery power is low or the battery is not fully inserted. Spare Battery Charging (LED on cradle) Off No spare battery in slot; spare battery not placed correctly; cradle
  • Motorola MC3000R | User Guide - Page 99
    Accessories 4 - 5 Four Slot Cradles CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on the battery. • Simultaneously charges up to four mobile computers. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of
  • Motorola MC3000R | User Guide - Page 100
    4 - 6 MC3000 User Guide LED Charge Indications The Four Slot cradles use the mobile computer amber Charge LED Indicator to indicate the battery charging status. See Table 4-1 on page 4-4 for charging status indications. Power LED The green Power LED (only on the Four Slot Charge Only cradle) lights
  • Motorola MC3000R | User Guide - Page 101
    Accessories 4 - 7 Four Slot Spare Battery Charger CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The Four Slot Spare Battery Charger simultaneously charges up to four spare batteries. CAUTION Use only a Symbol approved power
  • Motorola MC3000R | User Guide - Page 102
    User Guide LED Charge Indications The Spare Battery Charging LEDs indicate the spare battery charging status. The Spare Battery Charging LEDs are arranged in the same pattern as the spare battery charging slots so that the charging status of each battery power when used with the Symbol approved power
  • Motorola MC3000R | User Guide - Page 103
    7-1. The MC3000 Communication/Charge cables can charge the mobile computer battery and supply operating power. To charge the mobile computer battery: 1. Connect the MC3000 Communication/Charge cable power input connector to the Symbol approved power source. 2. Slide the bottom of the mobile computer
  • Motorola MC3000R | User Guide - Page 104
    UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, refer to the UBC 2000 Quick Reference Guide p/n 70-33188-xx. CAUTION Use only a Symbol approved power supply output rated 15 VDC and minimum 1.5 A. Use of an alternative power supply will void
  • Motorola MC3000R | User Guide - Page 105
    Accessories 4 - 11 POWER READY or STANDBY or FAULT (Green) (FlashingYellow) (SolidYellow) CHARGING (Solid Yellow to the UBC Adapter. READY or Green Charging complete. STANDBY or Flashing-Yellow The battery was deeply discharged and is being trickle charged to bring the voltage up to the
  • Motorola MC3000R | User Guide - Page 106
    the operator is properly grounded. Do not use the SD card slot for any other accessories. NOTE Select SD cards with environmental and/or the write cycle performance specifications that meet or exceed the application requirements. 2GB SD Memory Cards are supported on MC3000 with OEM Version 05.26
  • Motorola MC3000R | User Guide - Page 107
    Accessories 4 - 13 Plastic Holster The Plastic Holster provides a holder for the mobile computer. It consists of a the mobile computer, slide the mobile computer into the Plastic Holster with the screen facing the user. To remove the mobile computer, press and lift to remove the mobile computer.
  • Motorola MC3000R | User Guide - Page 108
    4 - 14 MC3000 User Guide Insert Mobile Computer Remove Mobile Computer Figure 4-10 Insert and Remove the Mobile Computer
  • Motorola MC3000R | User Guide - Page 109
    Accessories 4 - 15 Fabric Holster The Fabric Holster provides a soft holder for the mobile computer. It consists of a fabric mobile computer holder, a detachable shoulder strap and a detachable
  • Motorola MC3000R | User Guide - Page 110
    4 - 16 MC3000 User Guide Shoulder Strap Remove the detachable belt clip (see Figure 4-11 on To insert the mobile computer, slide the mobile computer into the Fabric Holster with the screen facing the user. 2. Pull restraining strap over mobile computer and secure in the clip. 3. To remove the mobile
  • Motorola MC3000R | User Guide - Page 111
    This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operation. Maintaining the Mobile Computer For trouble-free service, observe the following tips when using the mobile computer
  • Motorola MC3000R | User Guide - Page 112
    damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. See Service Information on page xv for contact information. Troubleshooting Mobile Computer Table 5-1 Troubleshooting the Mobile Computer Problem Cause Solution Mobile computer does
  • Motorola MC3000R | User Guide - Page 113
    Maintenance and Troubleshooting 5 - 3 Table 5-1 Troubleshooting the Mobile Computer (Continued) Problem Cause Solution Calibrate. Follow the screen prompts. The system crashed. Warm boot the system. To perform a warm boot, see Resetting the Mobile Computer on page 2-28. A message appears
  • Motorola MC3000R | User Guide - Page 114
    Guide Table 5-1 Troubleshooting the Mobile Computer (Continued) Problem Cause Solution The mobile computer does not accept scan input. Scanning application Verify that the mobile computer is loaded with a scanning is not loaded. application. See the system administrator. Unreadable bar code
  • Motorola MC3000R | User Guide - Page 115
    MC3000 Integrator Guide. Four Slot Charge Only Cradle Table 5-3 Troubleshooting the Four Slot Charge Only Cradle Problem Cause Solution computer into the cradle, ensuring it is correctly seated. Mobile computer battery is not charging. Mobile computer was removed from cradle or cradle was
  • Motorola MC3000R | User Guide - Page 116
    6 MC3000 User Guide Four Slot Ethernet Cradle Table 5-4 Troubleshooting the Four Slot Ethernet Cradle Problem Cause Solution mobile computer into the cradle, ensuring it is correctly seated. Mobile computer battery is not charging. Mobile computer was removed from cradle or cradle was
  • Motorola MC3000R | User Guide - Page 117
    six hours to fully recharge an Extended Life Battery. Spare battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. UBC Adapter Table 5-6 Troubleshooting the UBC Adapter Symptom Possible Cause Solution Battery Charging LED does not light when spare
  • Motorola MC3000R | User Guide - Page 118
    5 - 8 MC3000 User Guide Cables Table 5-7 Troubleshooting the Cables Symptom Possible Cause Solution the mobile computer to the MC3000 connector, ensuring it is correctly seated. Mobile computer battery is not charging. Mobile computer was detached from cable or cable was unplugged from AC
  • Motorola MC3000R | User Guide - Page 119
    Appendix ATechnical Specifications Mobile Computer And Accessory Technical Specifications Table A-1 summarizes the mobile computer technical specifications and intended operating environments. Table A-2 summarizes the accessory technical specifications and the intended operating environments.
  • Motorola MC3000R | User Guide - Page 120
    User Guide Table A-1 Mobile Computer Technical Specifications (Continued) Item Description Dimensions MC3000S: 7.43 in L x 3.18 in W x 1.76 in D (188.7 mm L x 80.8 mm W x 44.6 mm D) MC3000R: 8.33 in L x 3.18 in W x 1.57 in D (211.6 mm L x 80.8 mm W x 39.9 mm D) Weights MC3090G MH battery (
  • Motorola MC3000R | User Guide - Page 121
    SD cards *Go to http://software.symbol.com/ for a list of the latest supported symbologies. Select SD cards with environmental and/or the write cycle performance specifications that meet or exceed the application requirements. Table A-2 Accessory Specifications Single Slot Serial/USB Cradle Four
  • Motorola MC3000R | User Guide - Page 122
    A - 4 MC3000 User Guide Table A-2 Accessory Specifications (Continued) Single Slot Serial/USB Cradle Four Slot Charge Four Slot Universal Cables Only and Spare Battery Battery Charger Ethernet Cradles Charger (UBC) Adapter Power 12V, 3.3 A 5.4V, 3 12V, 9 A A 12V, 3.3 A 15V, 1.5 A
  • Motorola MC3000R | User Guide - Page 123
    keypad. The keypads can be selected as necessary to support specialized applications. The 28, 38 and 48-key and function keys. The keypads are color-coded to indicate the alternate function key (blue generated using the keyboard input panel. For more information see, Entering Information Using
  • Motorola MC3000R | User Guide - Page 124
    B - 2 MC3000 User Guide 28-Key Keypad 38-Key Keypad 48-Key Keypad Figure B-1 Keypads Table B-1 Special Character Generation Map Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation [ Use the Keyboard Input FUNC
  • Motorola MC3000R | User Guide - Page 125
    Input FUNC + 1 Panel* FUNC + X " Use the Keyboard Input Use the Keyboard Input Use the Keyboard Input Panel* Panel* Panel* + Use the Keyboard Input SHIFT + FUNC + 8 Use the Keyboard Input Panel* Panel* : Use the Keyboard Input SHIFT + FUNC + 6 Use the Keyboard Input Panel
  • Motorola MC3000R | User Guide - Page 126
    B - 4 MC3000 User Guide Table B-1 Special Character Generation Map (Continued) Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation ? Use the Keyboard Input SHIFT + FUNC + 9 Panel* _ Use the Keyboard Input
  • Motorola MC3000R | User Guide - Page 127
    Supply Regulatory Compliance Table C-1 Accessory Power Supplies, Regulatory Compliance Statements Accessory Power Supplies Regulatory Compliance Statements Single Slot Serial/USB Cradle Power Supply Four Slot Spare Battery Charger Power Supply Use only a Symbol-approved power supply output
  • Motorola MC3000R | User Guide - Page 128
    C - 2 MC3000 User Guide Table C-1 Accessory Power Supplies, Regulatory Compliance Statements Accessory Power Supplies Regulatory Compliance Statements Four Slot Charge Only Cradle Power Supply Four Slot Ethernet Cradle Power Supply Use only a Symbol-approved power supply output rated 12 VDC and
  • Motorola MC3000R | User Guide - Page 129
    . A radio protocol that may be used by the WLAN radio card. A Access Point. Access Point (AP) refers to Symbol's Ethernet Access Point. It is a piece of communications equipment that manages communications between the host computer system and one or more wireless terminals. An AP connects to a wired
  • Motorola MC3000R | User Guide - Page 130
    Glossary - 2 MC3000 User Guide B Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character,
  • Motorola MC3000R | User Guide - Page 131
    place for the terminal when not in use. D Dead Zone. An area within a scanner's field of view, in which specular reflection may prevent a successful decode. Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code scanned. Decode Algorithm
  • Motorola MC3000R | User Guide - Page 132
    node is on a different subnet, then the terminal sends the packet to the gateway first. The gateway determines how to route the packet to the destination subnet. This field is an option used by networks that require gateways. H Hard Reset. See Cold Boot. Hz. Hertz; A unit of frequency equal to
  • Motorola MC3000R | User Guide - Page 133
    . A computer that serves other terminals in a network, providing such services as computation, database access, supervisory A radio network that supports data communication within a local area, such as within a warehouse of building. laser scanner. A type of bar code reader that uses a beam of laser
  • Motorola MC3000R | User Guide - Page 134
    Glossary - 6 MC3000 User Guide LASER. Light Amplification by Stimulated Emission bar code symbol. Mobile Computer. In this text, mobile computer refers to the Symbol portable computer. It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless
  • Motorola MC3000R | User Guide - Page 135
    A device that connects networks and supports the required protocols for packet filtering. Routers are typically used to extend the range of cabling symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol
  • Motorola MC3000R | User Guide - Page 136
    decoding a bar code. Spring Radio Protocol. A radio protocol that may be used by the Symbol radio card. Symbol Radio cards that use the Spring protocol also have an Net ID. Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions and
  • Motorola MC3000R | User Guide - Page 137
    that is not saved to flash memory is lost. Wireless Local Area Network (WLAN). See LAN. Wireless Wide Area Network (WWAN). See WAN. WNMP. (Wireless Network Management Protocol) This is Symbol's proprietary MAC layer protocol used for inter access point communication and other MAC layer communication
  • Motorola MC3000R | User Guide - Page 138
    Glossary - 10 MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 139
    4-3 stylus 1-2 UBC adapter 4-1 battery charging 4-10 LED indicators 4-10 active and indicate programs 2-14 active tasks 2-17 ActiveSync xv Adaptive Frequency Hopping 3-1 AFH 3-1 aiming options aiming pattern 2-24 attaching strap/door assembly 1-12, 1-13 B backup battery specification
  • Motorola MC3000R | User Guide - Page 140
    indicators 4-6 four slot cradles battery charging 4-5 single slot serial/USB cradle 4-1 battery charging 4-2 LED indicators 4-3 troubleshooting 5-6 D data capture xii imager operational modes decode mode 2-23 pick list mode 2-24 data capture specifications A-3 DCP xv, 1-2 decode ranges
  • Motorola MC3000R | User Guide - Page 141
    communication/charge cables 4-8 battery charging 4-9 LED indicators 4-9 MC3000R parts 1-3, 1-4 MC3000S parts 1-3, 1-4 memory xii microphone 1-3 mobile computer cold boot 2-28 hard reset 2-28 power on 2-1 reset 2-28 scanning 2-20 soft reset 2-28 warm boot 2-28 Monarch printer cable
  • Motorola MC3000R | User Guide - Page 142
    1-9 stylus holder 1-4 suspend 1-12, 1-13, 2-16, 3-4 Symbol Mobility Developer Kit 1-2 Symbol Mobility Developer Kit for .NET, see SMDK T task manager 2-17 taskbar 2-14 technical specifications A-1 temperature battery charging A-1, A-3 operating A-1 storage A-1 troubleshooting 5-2 cables
  • Motorola MC3000R | User Guide - Page 143
    Windows CE .NET 5.0 Core 2-13, 2-16 Windows CE .NET 5.0 Professional 2-13, 2-16 wireless internet 2-30 wireless application 2-30 wireless applications 2-30 WLAN A-2 WLAN 802.11a/b/g xii WPAN Bluetooth xii Z Zebra printer cable 1-2, 4-8 Index - 5
  • Motorola MC3000R | User Guide - Page 144
    Index - 6 MC3000 User Guide
  • Motorola MC3000R | User Guide - Page 145
  • Motorola MC3000R | User Guide - Page 146
    New York 11742, USA 1-800-927-9626 http://www.symbol.com MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc. 2007 72E-68899-04 Revision
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146

MC3000
User Guide