Marantz VP-12S3 Marantz RC codes All PJ
Marantz VP-12S3 Manual
 |
View all Marantz VP-12S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz VP-12S3 manual content summary:
- Marantz VP-12S3 | Marantz RC codes All PJ - Page 1
RS232C Control Spec. for VP-12S3 Marantz America, Inc. Nov. 22, 2003 Rev. 1.00 - Marantz VP-12S3 | Marantz RC codes All PJ - Page 2
Specification for VP-12S3 1. PC Control Interface * RS-232C(Straight Cable) * Baud rate 9600 bps * Data length 8 bits * Parity None * Stop bit 1 bit * Flow Control RTS/CTS * Communication procedure Full duplex 2. PC Control Command Reference 2.1. Command Communications Sequence Projector - Marantz VP-12S3 | Marantz RC codes All PJ - Page 3
RS232C Control Specification for VP-12S3 Commands, such as Power On Command at the time of notes Standby (Fan operation), return only ACK, when processing is not carried out. For example: When Power On is sent to Projector. Command transmission from PC. "@PWR", 0x0D After Command processing end - Marantz VP-12S3 | Marantz RC codes All PJ - Page 4
RS232C Control Specification for VP-12S3 2.4. Normal Command List Command Power Source Preset Aspect V-Mute Keystone V Keystone H Focus Power On Standby Component 1 Component 2 S-Video Video RGB AUX Theater 1 Theater 2 Theater 3 Theater Default Standard 1 Standard 2 Standard 3 Standard Default - Marantz VP-12S3 | Marantz RC codes All PJ - Page 5
RS232C Control Specification for VP-12S3 Command Black Setup Lamp Mode IRIS Auto Power Off Cinema Remote Control Black Setup 0IRE Black Setup 7.5IRE Lamp Mode High Lamp Mode Low IRIS On IRIS Off Auto Power Off Enable Auto Power Off Disable Cinema Auto Cinema Off Cursor Up Cursor Down Cursor Right - Marantz VP-12S3 | Marantz RC codes All PJ - Page 6
RS232C Control Specification for VP-12S3 2.5. Request Status Command List Request Status Power Request FOC?", 0x0D Answer Sample On Standby Component 1 Component 2 S-Video Video RGB AUX Theater 1 Theater 2 Theater 3 Theater Default Standard 1 Standard 2 Standard 3 Standard Default Dynamic 1 - Marantz VP-12S3 | Marantz RC codes All PJ - Page 7
RS232C Control Specification for VP-12S3 Request Status Black Setup Lamp Mode IRIS Auto Power Off Cinema Request Command "@BSET?", 0x0D "@LMODE?", 0x0D "@IRIS?", 0x0D "@APO?", 0x0D "@CNEMA?", 0x0D Answer Sample 0IRE "@BSET0",0x0D, 0x0a 7.5IRE "@ - Marantz VP-12S3 | Marantz RC codes All PJ - Page 8
RS232C Control Specification for VP-12S3 2.6. Special Command List Request Status Order Number Main u-com Build Num. Sub u-com Build Num. Sub Boot Version Sub u-com Version Main u-com Version Gui Version Lamp Life Total Lamp Life VP Status Request Command "@ORDER", 0x0D "@BUILD_MAIN?", 0x0D "@ - Marantz VP-12S3 | Marantz RC codes All PJ - Page 9
RS232C Control Specification for VP-12S3 It is asked for frequency by the following formulas from the return value of V Sync. In addition, since return value is Hex, be careful. 1 = frequency [
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
RS232C Control Spec.
for
VP-12S3
Marantz America, Inc.
Nov. 22, 2003
Rev. 1.00