Marantz MT7001 User Guide
Marantz MT7001 Manual
 |
View all Marantz MT7001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz MT7001 manual content summary:
- Marantz MT7001 | User Guide - Page 1
Marantz product. This wall hanging bracket is for use with the ES7001. Do not use the wall hanging bracket for any other purpose, or with any other units. Please read this instruction manual thoroughly before use, and make sure that the bracket is nothing missing. • MT7001 Wall hanging plate x 1 • - Marantz MT7001 | User Guide - Page 2
ENGLISH CONTENTS SAFETY PRECAUTIONS 2 ABOUT THE INSTALLATION LOCATION 3 WHEN INSTALLING 4 INSTALLATION PROCEDURE 5 SPECIFICATIONS 8 SAFETY PRECAUTIONS WARNING ¶ Installation should only be performed by a professional contractor. The unit may be dropped, may fall, and may therefore cause injury - Marantz MT7001 | User Guide - Page 3
that are suitable for the construction materials and structure of the wall. ¶ Installing Onto Concrete Walls Use commercially available anchors that are able to support the combined weight of the ES7001 and wall hanging bracket. CAUTION ¶ Do not install near kitchen counters or humidifiers, or any - Marantz MT7001 | User Guide - Page 4
support the weight. ¶ Do not clip the ES7001 power cord and cables to the wall , over-bend, or twist them. Doing so may cause the cable core to short or break, which may cause fire. ¶ Do not hang any extra weight other than the ES7001 on the bracket holes of the MT7001. Failing to do Marantz - Marantz MT7001 | User Guide - Page 5
. 1. After reading all of the safety precautions in the lAbout the Installation Locationz section of this manual, find a suitable installation position for the ES7001 on the wall surface. 2. Prepare 4 anchors and the necessary screws etc that are suitable for the strength and construction materials - Marantz MT7001 | User Guide - Page 6
ENGLISH INSTALLATION PROCEDURE w Attach the ES7001 installation screws to the ES7001 1. Remove the ES7001 cables, and place it on a level surface. • While being careful not to scratch the ES7001 panel, cover the level surface with a soft cloth, and place the ES7001 onto the cloth with the front - Marantz MT7001 | User Guide - Page 7
hands or fingers. Warning: • If the 4 screws are not correctly inserted into the 4 holes on the plate, the ES7001 may fall causing injury. • If the wall hanging plate has been installed upside down, the ES7001 will fall causing injury. 4. To remove the ES7001 from the - Marantz MT7001 | User Guide - Page 8
ENGLISH SPECIFICATIONS ¶ Weight ...1.2kg (2.6lbs) ¶ Dimensions (Unit: mm (inch)) 17.3 (11/16) 69.9 (2-13/16) 6.4 (5/16) 31.8 (1-5/16) 50.8 (2) Center position 948 (37-3/8) 812.8 (32) 102 (4-1/16) 8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
1
ENGLISH
Thank you for purchasing this Marantz product. This wall hanging bracket is for
use with the ES7001. Do not use the wall hanging bracket for any other purpose,
or with any other units. Please read this instruction manual thoroughly before
use, and make sure that the bracket is installed by a professional contractor.
[Before Installation]
• Before installing the bracket, make sure you read and fully understand the
“
Safety Precautions
”
section.
• Store this instruction manual in a safe place.
•
Ensure you strictly observe all of the cautions written on the bracket and in the instruction manual.
• Follow all of the instructions when installing the bracket.
• This bracket can only be used with the products that it was packaged with, or with the products
specified in this instruction manual.
• Do not alter this bracket or accessories in any way.
• Do not use any of the parts if they are damaged. If you find that any of the parts are damaged,
contact the store where you purchased this product.
• Always make sure that bolts and screws are tightened securely.
• After installation, periodically check the safety of the bracket.
[About Installation]
• This unit is sold with the precondition that the installation work be done by a professional who
has sufficient skill and technical ability. Always entrust the erection and installation of this bracket
to a professional contractor that specializes in this field, or the store where you purchased this
product.
• After installing the wall hanging plate on the wall, holes from the attachment screws and the
anchor bolts will be left in the wall after the wall hanging plate is removed.
• After prolonged use of the ES7001, the wall may become discolored due to the heat or flow of
air generated by the ES7001.
Marantz cannot accept any responsibility for accidents or damage that result
from defective installation or incorrect use, or accidental damage that results
from unauthorized alterations of the products or natural disasters.
LIST OF ACCESSORIES
Before using this product, check the contents of the box to make there is nothing missing.
• MT7001 Wall hanging plate x 1
• ES7001 attachment screws x 4
*
Always use attachment screws that are suitable for the attachment location of the wall hanging plate.