LiftMaster JHDC JHDC Data Sheet - English

LiftMaster JHDC Manual

Get LiftMaster JHDC PDF manuals and user guides View all LiftMaster JHDC manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster JHDC manual content summary:

  • LiftMaster JHDC | JHDC Data Sheet - English - Page 1
    including: • Sectional Doors (Standard Lift, High Lift and Full Vertical) • Rolling steel doors/grilles Standard duty cycle and Extended duty cycle applications where a manual hoist is required Standard Duty: Up to 20 cycles per hour and 90 cycles per day Extended Duty: Up to 30 cycles per hour and
  • LiftMaster JHDC | JHDC Data Sheet - English - Page 2
    ) 24Vdc, 1A Auxiliary Output 65:1 Gearbox with #50 Chain Output Electromechanical for operators that support doors up to 700 and 1200 lbs. Brake is included on 2200 models NEMA 1 type myQ Facility technology enables Diagnostics, absolute cycle count, service cycle count, and remote management
  • LiftMaster JHDC | JHDC Data Sheet - English - Page 3
    MAXUM Next Generation DC Commercial Door Operator JHDC Hoist Operator SECTION 08 71 13 Sectional Doors Recommended Drum/Sprocket Configuration for 12"/second Door Speed Operator 700 1200 2200 Door Type Standard High Lift Standard Vertical Standard High Lift High Lift Standard Vertical High Lift
  • LiftMaster JHDC | JHDC Data Sheet - English - Page 4
    MAXUM Next Generation DC Commercial Door Operator JHDC Hoist Operator SECTION 08 71 13 Dimensions 700 lb. Standard 1200 lb. Standard A 19.1867" 19.5017" B 25.7279" 26.0428" SCALE 0.300 A B 9.772 8.350 BOTTOM 2.500 10.250 3.500 12.106 9.606 1.950 4.101 8.800 1.625 8.350 7.000 5.512 INSIDE
  • 1
  • 2
  • 3
  • 4
JHDC Hoist Operator
SECTION 08 71 13
DATA SHEET
Key Features
Standard Application
Recommended for door types including:
• Sectional Doors (Standard Lift, High Lift and Full Vertical)
• Rolling steel doors/grilles
Standard duty cycle and Extended duty cycle applications where a
manual hoist is required
Rated Duty Cycle
Standard Duty: Up to 20 cycles per hour and 90 cycles per day
Extended Duty: Up to 30 cycles per hour and 150 cycles per day
Operator Speed
Average 12" per second for Sectional doors and 8-9" per second
on Rolling Steel doors
Limit Settings
Electronic limits via Floor Level Wall Controller with LCD display
Emergency Disconnect for Manual Operation
Operator includes an Engage rope (Green) and a Disengage rope (red) with
manual hoist to electrically disable the operator controls
Emergency Disconnect with Auto - Reconnect
Operator includes an Engage rope (Green) and a Disengage rope (red) with
manual hoist to electrically disable the operator controls. Pull the engage
(green) rope to operate the door again electrically
Programming
Floor Level Wall Controller with LCD display to program and commission door
Circuit Board
DC Logic Circuit Board
Timer-to-Close
Program through menu on wall controller. Option is available in B2
Mode with two settings.
User can select a desired Timer-to-Close (TTC)
time duration under that menu
Mid-Stop
Progam setup under System Configuration Operating Mode, Mid-stop
Battery Backup
DC7AH (2): 7 Ah batteries and mounting bracket (optional)
Run Time Protection
Standard: 20 Cycle Count and Cycle 21% within a 60 minute threshold
Extended Duty: 30 Cycle Count and Cycle 37% within a 60 minute threshold
Motor Reverse Action Protection
Stop Fast: 250ms ramp
Stop Ramp:
500ms-2000ms; Stop button while opening
Emergency (Safety-Chain): CTM trigger immediate stop
Motor Operator Wall Controller
Floor Level Wall Controller with LCD screen using 2 wire interface to
connect to powerhead
MAXUM
Next Generation
DC Commercial Door Operator