Lenovo Flex 20 Lenovo IdeaCentre Flex 20 Series User Guide
Lenovo Flex 20 Manual
View all Lenovo Flex 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo Flex 20 manual content summary:
- Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 1
Machine type: 10142/F0A9 www.lenovo.com Version 1.0 2013.07 31504647 Lenovo IdeaCentre Flex 20 Series User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 2
. Note: Pay attention to this important information. © Copyright Lenovo 2013. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 3
- Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 4
Information Using the Computer Hardware 1 Front view of the computer 2 Left and right view of the computer 3 Rear view of the computer 4 Screen rotation 5 Computer stand 6 Connecting your computer 8 Important information about using the computer 9 Connecting to the Internet 10 Using the - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 5
User Gesture Instructions for the Touch screen 20 Precautions when using the Touch Screen 25 Using the Rescue System 27 OneKey Recovery 28 Driver and Application Installation 29 Using the Software 31 Lenovo Support 32 Troubleshooting and Confirming Setup 33 Troubleshooting Display Problems - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 6
the Computer Hardware This chapter contains the following topics: Ø Introduction to the computer hardware Ø Information on computer connections Note: The descriptions in this chapter might be different from what you see on your computer, depending on the computer model and configuration. User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 7
surroundings. The screen brightness automatically adjusts depending on the ambient light conditions detected by the built-in ambient light sensor. ** Windows button Press this button to: • toggle between the current view and the Start screen or • wake up the computer from sleep mode 2 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 8
(2) Power connector * Combo audio jack: Used to connect headsets. Notes: • The combo audio jack does not support conventional microphones. • Different industry standards may lead to the recording function not being supported if third-party headphones or headsets are connected. User Guide 3 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 9
not to block any air vents on the computer. Blocked air vents can cause overheating. 1 23 4 6 5 6 Power button Volume up Volume down Screen rotation lock button* Stand lock Air vents * Screen rotation lock button Keeps the screen locked in portrait or landscape orientation. 4 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 10
support screen rotation and will cause the screen to appear abnormal. If this happens, lock the screen to prevent rotation or refrain from rotating the screen. • Use the screen rotation lock button on the top edge of the computer to prevent automatic display rotation. (See illustration below.) User - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 11
Computer stand 15º 70º 90º 1. First open the stand to its maximum angle, then adjust the display position. 2. The computer can be positioned at between 15° and 70° from an upright vertical position, and can also be placed flat down in a horizontal position. 6 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 12
the stand lock and open the stand as shown in the illustration. 2. Open the stand to the maximum angle for a stable position. Note: You must open the stand to the maximum angle to prevent the stand coming out of position or becoming unstable, which could cause the computer to fall over. User Guide 7 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 13
to music or other sounds without disturbing anyone. Use this connector to attach a device that requires a USB connection. Note: If your computer is equipped with a wireless keyboard or mouse, follow the installation instructions for those devices. Connecting the power cord 1 2 3 8 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 14
Important information about using the computer Press the power button on the top of the computer to turn on the computer. Hold the computer tightly when you carry it. User Guide 9 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 15
computer to other devices. Wired network connection For wired networks, connect one end of an Ethernet cable (purchased separately) to the Ethernet connector on your computer, and then connect the other end to the network router or broadband modem. Consult your ISP for detailed setup instructions - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 16
Using the E-Dice This chapter contains the following topics: Ø E-Dice instructons Note: Only some models are equipped with E-Dice. Note: The interface and functionality of these features will depend on which software was shipped with the computer model you purchased. User Guide 11 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 17
. To charge the battery, do the following: Put the E-Dice into the included USB power adapter and connect the adapter to the USB connector on your computer. Note: The indicator will blink while the E-Dice is charging. When the light stays on constantly, the E-Dice is fully charged. 12 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 18
USB connector of your computer. 2. Lay the computer face-up on a flat surface to switch the desktop interface to the Aura program. Open the Lenovo Tycoon game and play the game with the E-Dice as per the directions. You may need to manually pair the E-Dice if it does not work. To pair the E-Dice - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 19
dust buildup. • The E-Dice and its accessories are only compatible with the IdeaCentre Flex 20 series models. Do not use them with other equipment. • Charge the E-Dice immediately after purchase. • To extend battery life, we recommend you charge the battery to approximately 30% to 50% capacity, and - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 20
Charms Bar Shutting down the computer Switching between apps Closing an app Opening other system programs Windows Help and Support Attention: The Windows 8 operating system is provided by Microsoft Corporation. Please use it in accordance with the END USER LICENSE AGREEMENT (EULA) between - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 21
between the main Windows 8 interfaces Windows 8 comes with two main user interfaces: the Start Screen and the Windows desktop. To switch from the Start Screen to the Windows desktop, do one of the following: • Select the Windows desktop tile on the Start Screen. • Press the Windows key + D. To - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 22
Support file, do one of the following: • Select the Settings charm, then select Help. • Press the Windows key + F1. You can read the Windows Help and Support file on your computer. You can also get online help and support by clicking on one of the two links listed under More to explore. User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 23
18 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 24
Touch screen instructions This chapter contains the following topics: Touch Screen Calibration User Gesture Instructions for the Touch screen Attentions when using the Touch Screen User Guide 19 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 25
"Calibrate" button. User Gesture Instructions for the Touch screen The Touch screen supports single touch and rotational movements, enlargement and reduction multi-touch operations, and the user can transmit position information to the computer via touch. The touch screen uses a very low pressure - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 26
on the touch screen, with one finger touch it one or two times, to perform a single click or double click operation. This is similar to the action performed by clicking the mouse left button. 2. Single Finger . This is similar to the action performed by clicking the mouse right button. User Guide 21 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 27
Movement When you move your finger one time vertically (or horizontally) on the touch screen, this is called a Rolling Operation. For example: This operation is similar to moving the scroll wheel on the top of a mouse, and produces the same results as the scroll wheel interface does. 22 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 28
can enlarge or reduce the picture size in Windows Photo Viewer. 6. Rotation Operation Use two figures to touch the desired item on the touch screen, then rotate use the touch screen, refer to Windows Help and Support by press Windows key + F1 or Select Settings charm, then select Help. User Guide 23 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 29
charm. • Select touch actions which you wish to adjust. By clicking on "Settings", you can adjust the "Speed" and "Spatial tolerance" parameters, to match the user's natural way of double-clicking. You can double-click on the lower right corner of the icon to test this. Note - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 30
not affect other computer processes when used normally. 6. Recognition of touch gestures can be influenced by the following: • Touching the correct place on the screen. • The speed of movement. • The time interval from when the screen was last touched. Note: The user can consult this manual and also - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 31
7. The touch screen does not function in Rescue System mode. 8. The touch screen also does not function during the startup process, in Hibernate mode and in Sleep mode or Safe mode. 26 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 32
Driver and Application Installation Attention: Using OneKey Recovery will result in loss of data. • You can restore the C: drive of the computer to factory default settings or to the last system backup status using on the C: partition. Otherwise, the OneKey Recovery system cannot run. User Guide 27 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 33
and relevant data used by the rescue system are saved in the service partition. Deleting this partition will make the rescue system unusable. For more detailed information, see the following instructions: From the Search charm, select Apps → Control Panel → Administrative Tools → Computer Management - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 34
software which is already installed on the computer. 2. Make sure that the Driver and Application Installation software has been automatically installed before starting the operating system. The manual installation function can only be used after the software has been installed. User Guide 29 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 35
30 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 36
Using the Software This chapter contains the following topic: Software instructions Note: The interface and functionality of these features will depend on which software was shipped with the computer model you purchased. User Guide 31 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 37
displayed.) Registration Registration provides you with access to product support, upgrades and alerts on topics. Take advantage of award-winning Lenovo services. User Guide The User Guide provides more information about your computer. Service and Warranty You can extend the warranty of your - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 38
Troubleshooting and Confirming Setup This chapter contains the following topic: Ø Troubleshooting and Problem Resolution User Guide 33 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 39
Follow these tips when troubleshooting your computer: • If you added or removed a part before the problem started, review the installation procedures to ensure that the part is correctly installed. • If a peripheral device does not work, ensure that the device is properly connected. • If an error - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 40
devices away from the computer. 3. If the problem persists, contact Lenovo Service. Troubleshooting Touch screen Problem: The touch screen reacts, but not where you are touching it. Troubleshooting and problem resolution: Touch Screen Calibration: 1. In Control Panel, select "Hardware and - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 41
the Windows volume control - select the speaker icon from the Settings Charm or click the arrow on taskbar to show the hidden icons in Windows desktop mode, then click the speaker icon. Ensure that the volume is turned up and the sound is not muted. Troubleshooting Software Problems Problem: You are - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 42
x 1000/(1024 x 1024 x 1024) = 37G. If the Service partition of 3G - 3 x 1000 x 1000 x 1000/(1024 troubleshooting Windows Record the following information as it may be useful later when troubleshooting system problems: The drivers for this computer model only support the Windows 8 system. User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 43
key + F1. You can read the Windows Help and Support file on your computer. You can also get online help and support by clicking on one of the two links listed under More to explore. BIOS setup utility What is the BIOS setup utility? The BIOS setup utility is ROM-based software. It communicates basic - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 44
the computer. • Use a heavily dampened cloth. • Spray water directly onto the surface of the monitor or inside the computer. LCD monitor should be cleaned daily. Use a dry cloth to brush dust from the monitor and keyboard every day. Keep all surfaces clean and free of grease stains. User Guide 39 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 45
40 User Guide - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 46
exactly the actual configuration of the computer that you purchase.You are welcome to contact us about the manuals included with your computer. For the latest information or any questions or comments, contact or visit the Lenovo Web site: Service Web site: http://support.lenovo.com User Guide 41 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 47
Devices, Inc. Other company, product, or service names referred to herein or in other Lenovo publications may be trademarks or service marks of others. All rights reserved. Names or marks of certain companies mentioned in the manuals included with your computer or this document do not necessarily - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 48
• Advanced power settings: - Turn off hard disk drives: After 20 minutes - Hibernate: Never To awaken your computer from a Sleep or System Standby mode, press any key on your keyboard. For more information about these settings, refer to your Windows Help and Support information system. User Guide 43 - Lenovo Flex 20 | Lenovo IdeaCentre Flex 20 Series User Guide - Page 49
, select Power → ErP and press Enter. 3. Select Enabled and press Enter. 4. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm. Note: When ErP compliance mode is enabled, you only can wake up your computer by pressing the power switch. 44 User Guide
Machine type: 10142/F0A9
Lenovo
IdeaCentre Flex 20 Series
User Guide
www.lenovo.com
Version 1.0
2013.07
31504647