Kenwood CR-M10DAB-B Operation Manual
Kenwood CR-M10DAB-B Manual
 |
View all Kenwood CR-M10DAB-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood CR-M10DAB-B manual content summary:
- Kenwood CR-M10DAB-B | Operation Manual - Page 1
DAB+ Compact Radio CR-M10DAB OPERATING INSTRUCTIONS JVCKENWOOD Corporation DEUTSCH ENGLISH - Kenwood CR-M10DAB-B | Operation Manual - Page 2
functions 13 Using BLUETOOTH Pairing BLUETOOTH devices 14 Playback using BLUETOOTH 14 Using Line-In P layback from an external player 14 Troubleshooting General Information 15 Maintenance and care 15 Disposal 16 Technical data 16 Warranty 18 2 - Kenwood CR-M10DAB-B | Operation Manual - Page 3
all the warnings indicated on the product and specified in the operating instructions. 1. Clean with a dry cloth only! - Remove the plug-in plug-in power supply unit provided. Use this adapter for the Compact Radio CR-M10DAB only. In any case ensure that the local mains supply corresponds to the - Kenwood CR-M10DAB-B | Operation Manual - Page 4
Unauthorised spare parts can lead to fire, electrical shock or other accidents. 13. Safety testing - After completion of maintenance or repair work on this device, ask the Customer Service Technician to carry out safety testing to ensure that the device is in proper working order. 14. Heat - Do not - Kenwood CR-M10DAB-B | Operation Manual - Page 5
Conformity JVCKENWOOD Corporation hereby declares that the CR-M10DAB type of radio equipment conforms with Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available under the following internet address: http://www.kenwood - Kenwood CR-M10DAB-B | Operation Manual - Page 6
Prior to start-up Unpacking Carefully unpack the device and ensure that all accessory parts are present: Operating instructions Plug-in power supply unit Insert batteries (not supplied) • Insert 4 R6 / AA / Mignon batteries into the radio, ensuring the correct polarity (+ and -). • Power - Kenwood CR-M10DAB-B | Operation Manual - Page 7
Components and functions Control elements Front Panel Rear Panel 2 1 - Display 3 2 - Line-In connection 3 - Headphone connection 4 4 - Plug-in power supply 1 5 unit connection 5 - FM / DAB antenna 1 - Switching sources 2 - Standby/ On 3 - Volume/Enter/Auto/Play/Pause 4 - Storage - Kenwood CR-M10DAB-B | Operation Manual - Page 8
. This process can take some time, depending on the strength of reception. If no appropriate station is available, you can also set the time manually. 1. Switch the radio on and, using the button, select the source FM. 2. Press the button, then, using , select the "System - Kenwood CR-M10DAB-B | Operation Manual - Page 9
Setting the display lighting The display lighting can be set in 3 brightness levels. The following settings can be performed in the "Backlight" menu: "On level": Display brightness when the radio is switched on. Options: "High" / "Medium" / "Low" "Dim level": Brightness setting for operation and - Kenwood CR-M10DAB-B | Operation Manual - Page 10
Setting the alarm 2 different alarm times can be set in the CR-M10DAB. The alarm can also be programmed for the following time blocks: . 2 seconds and afterwards changes to the display "Full scan". Then please test that the antenna is correctly oriented or try to find a different location 1 for - Kenwood CR-M10DAB-B | Operation Manual - Page 11
associated frequency. • Press the button or the button to manually select another channel. • Confirm the selection using the "VOL" button. The is not sufficient at the selected station for undisturbed playback, then "Service not available" will appear in the display. In such case - Kenwood CR-M10DAB-B | Operation Manual - Page 12
display with its associated frequency. • Press the buttons to manually select another channel. • Confirm the selection using the "VOL" to load the current ensemble. • DRC (Dynamic Range Control): Provided this is support by the set station, an adjustment can be made to the dynamic range. - Kenwood CR-M10DAB-B | Operation Manual - Page 13
time, the station name will be displayed rather than the frequency and radio text will be displayed in the lower line of the display (if supported by the station). RDS functions The following information can be called up by repeatedly pressing the button: • PTY (Program Type) - If no PTY - Kenwood CR-M10DAB-B | Operation Manual - Page 14
following procedure for pairing the relevant devices (e.g. smartphones): 1. On your BLUETOOTH device open the pairing function and search for "CR-M10DAB". 2. Select "CR-M10DAB" for pairing and wait until "Connected" appears in the display and "Device connected" is heard. Pairing is now concluded - Kenwood CR-M10DAB-B | Operation Manual - Page 15
Troubleshooting In the event of malfunction please check the following points: No sound system does not react to button pressing Take out the main cable and reconnect it. Radio reception problems Re-align the antenna. Look for a more suitable location. Other electrical devices disrupt the - Kenwood CR-M10DAB-B | Operation Manual - Page 16
Disposal Disposal of used electrical and electronic devices and batteries. The symbol (crossed-out wheeled bin) on the product or its packaging indicates that the product may not be treated as normal household waste but must rather be handed in at a collection point for recycling electrical and - Kenwood CR-M10DAB-B | Operation Manual - Page 17
Technical data CR-M10DAB Power supply DC Input Power input in standby mode FM/DAB+ tuner DAB tuning range BAND III FM tuning range BLUETOOTH BLUETOOTH Version Power Class - Kenwood CR-M10DAB-B | Operation Manual - Page 18
keep this warranty card in a safe place. Kenwood gives a two-year warranty on this device from including those regular checks mentioned in the operating instructions. (b) Damage to the product which has which must be replaced as part of normal customer service such as pick-up systems, needles, drive
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
DAB+ Compact Radio
CR-M10DAB
OPERATING INSTRUCTIONS
JVCKENWOOD Corporation
DEUTSCH
ENGLISH