Icom F2821D Instruction Manual

Icom F2821D Manual

Get Icom F2821D PDF manuals and user guides View all Icom F2821D manuals
Add to My Manuals
Save this manual to your list of manuals

Icom F2821D manual content summary:

  • Icom F2821D | Instruction Manual - Page 1
    INSTRUCTION MANUAL VHF MOBILE TRANSCEIVER iF1721/D iF1821/D UHF MOBILE TRANSCEIVER iF2721/D iF2821/D This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Above photo shows the IC-F1721/D or IC-F2721/D.
  • Icom F2821D | Instruction Manual - Page 2
    carefully and com- pletely before using the transceiver. SAVE THIS INSTRUCTION MANUAL - This instruction manual contains important operating instructions for the IC-F1721/D, F1821/D, F2721/D and F2821/D VHF/ UHF MOBILE TRANSCEIVERS. RWARNING! NEVER connect the transceiver to an AC outlet
  • Icom F2821D | Instruction Manual - Page 3
    AVOID operating the transceiver without running the vehi- cle's engine. The vehicle's battery will quickly run out if the transceiver transmits while the vehicle's engine OFF. AVOID placing the transceiver in excessively dusty envi- ronments. AVOID placing the transceiver against walls. This will
  • Icom F2821D | Instruction Manual - Page 4
    TABLE OF CONTENTS IMPORTANT i I Receiving a message 19 EXPLICIT DEFINITIONS i D Receiving a status message 19 PRECAUTIONS i D Receiving an SDM (Short Data Message 19 ABOUT APCO PROJECT 25 ii D Received message selection 20 TABLE OF CONTENTS iii I Transmitting a status 21 1 PANEL
  • Icom F2821D | Instruction Manual - Page 5
    I Front panel q w Icom Inc 1 PANEL DESCRIPTION 1 e* e* IC-F1721/D F2721/D IC-F1821/D F2821/D o i uy t r q AF VOLUME CONTROL KNOB Rotate the knob to adjust the audio output level. • Minimum audio level is pre-programmed. w FUNCTION DISPLAY (p. 2) Displays a variety of information, such as an
  • Icom F2821D | Instruction Manual - Page 6
    INDICATOR Lights red while transmitting. i DEALER-PROGRAMMABLE KEYS Desired functions can be programmed independently by your dealer. (p. 3) In this instruction manual, these keys are from the left, called [P0]/[P1]/[P2]/[P3]/[P4]. o MICROPHONE CONNECTOR Connect the supplied microphone or optional
  • Icom F2821D | Instruction Manual - Page 7
    Set mode contents, DTMF code, etc. The indication mode can be selected from 1 line or 2 lines. Ask your dealer for details. In this instruction manual, the LCD illustration is described using the 2 lines indication mode. !1 ACTIVATED KEY INDICATOR Appears above the key assigned as [DIGITAL] key when
  • Icom F2821D | Instruction Manual - Page 8
    1 PANEL DESCRIPTION ZONE KEY Push this key, then select the desired zone using [CH Up]/ [CH Down]. ➥ Push and hold this key for 1 sec. to indicate the scan group, then select the desired group using [CH Up]/ [CH Down]. What is "zone"?-The desired channels are assigned into a zone according to the
  • Icom F2821D | Instruction Manual - Page 9
    PANEL DESCRIPTION 1 PUBLIC ADDRESS KEY HIGH/LOW KEY 1 While in the hailer mode, push this key for the audio output Push to select the transmit output power temporarily or per- via the hailer amplifier. Ask your dealer for details. manently, depending on the pre-setting. While in the normal
  • Icom F2821D | Instruction Manual - Page 10
    1 PANEL DESCRIPTION RE-DIAL KEY Push to transmit the last-transmitted DTMF code. CALL KEYS Push to transmit a 2/5-tone/BIIS ID code. •Call transmission is necessary before calling another station depending on your signalling system. • [Call A] and/or [Call B] may be available when your system
  • Icom F2821D | Instruction Manual - Page 11
    the transmit status indication and select a status number. ➥When a received SDM is displayed, push (or rotate)* to cancel the automatic scroll and scroll the message manually. ➥When an SDM that contains more than 12 characters is displayed, push (or rotate)* to scroll the message
  • Icom F2821D | Instruction Manual - Page 12
    1 PANEL DESCRIPTION SCRAMBLER/ENCRYPTION KEY (LMR (P25 Conventional) operation only) ➥ While in the analog mode operation, push to toggle the voice scrambler function ON and OFF. ➥ While in the digital mode operation, push to toggle the encryption transmission function ON and OFF. ➥ While in the
  • Icom F2821D | Instruction Manual - Page 13
    operating channel, in sequence; or, push one of [MR-CH 1] to [MR-CH 4] keys to select a channel directly. P0 P1 P2 P3 P4 *In this instruction manual, these keys are from the left, called [P0]/[P1]/[P2]/[P3]/[P4]. KEY P0 P1 P2 P3 P4 ZONE TYPE: Push [Zone] then push [CH
  • Icom F2821D | Instruction Manual - Page 14
    contacting you. q Select the desired TX code channel, 2/5-tone code, Individual ID code* or Talkgroup ID code* according to your System Operator's instructions. • This may not be necessary depending on programming. • Refer to pgs. 11-13 for selection. *Digital mode operation only. w Push the
  • Icom F2821D | Instruction Manual - Page 15
    BASIC OPERATION 2 D Transmitting notes D TX code channel selection • Transmit inhibit function If the transceiver has [TX Code CH Select] assigned to it, the The transceiver has several inhibit functions which restrict indication can be toggled between the operating channel 2 transmission
  • Icom F2821D | Instruction Manual - Page 16
    2 BASIC OPERATION D TX code number edit (PMR or BIIS PMR operation only) If the transceiver has [TX Code CH Select] or [TX Code Enter] assigned to it, TX code contents can be edited within the allowable digits. USING [TX CODE CH SELECT] KEY: q Push [TX Code CH Select] to enter the TX code channel
  • Icom F2821D | Instruction Manual - Page 17
    BASIC OPERATION 2 D Individual ID code selection r Change the channel- cancels the selected Talkgroup ID (Digital mode operation only) code (return to the pre-set Talkgroup ID code in the chan- If the transceiver has [Individual] assigned to it, the indication nel.) 2 can be toggled between
  • Icom F2821D | Instruction Manual - Page 18
    2 BASIC OPERATION I User set mode User set mode is accessed with [User Set Mode] and allows you to set seldom-changed settings. In this case you can "customize" the transceiver operation to suit your preferences and operating style. Entering the user set mode: q While pushing and holding [P1] and [
  • Icom F2821D | Instruction Manual - Page 19
    to a key. • " " appears and the mute is released. • The programmed text message (e.g."CALLING") and the calling P0 P1 P2 P3 P4 In this instruction manual, these keys are from the left, called [P0]/[P1]/ [P2]/[P3]/[P4]. [P0]; Call : Push to transmit a 5-tone/BIIS call when the selected channel
  • Icom F2821D | Instruction Manual - Page 20
    3 BIIS OPERATION D Group call q When a group call is received; • Beeps sound. • " " appears and the mute is released. • The programmed text message (e.g."GROUP") and the calling station ID (or text) is displayed when the indication mode is 2 lines. • The programmed text message (e.g."GROUP") and
  • Icom F2821D | Instruction Manual - Page 21
    BIIS OPERATION 3 I Transmitting a call A total of 3 ways for code selection are available-selecting D Calling back from the queue channel the call code from memory, entering the call code from the q While in the standby condition, push [P1] (Digital) for 3 keypad and calling back from the
  • Icom F2821D | Instruction Manual - Page 22
    3 BIIS OPERATION D Direct code entry q While in the standby condition, push [P3] (TX Code Enter) to enter the TX code edit mode. • Code digit for editing blinks. 0500 w Push [P3] (TX Code Enter) to select the desired digit to be edited. • Digit for editing differs according to the setting. e Set
  • Icom F2821D | Instruction Manual - Page 23
    displayed alternately) when the scroll timer is set to 'OFF.' In this case, push [Status Up]/[Status Down] to display the status message manually. SDM 8 BASE w When the received SDM includes more than 12 characters, the message scrolls automatically, when the automatic scroll function is activated
  • Icom F2821D | Instruction Manual - Page 24
    12 characters, the message scrolls automatically when the automatic scroll function is activated. • Push [Status Up]/[Status Down] to scroll the message manually. r Push [P1] (Digital) for 1 sec. again to return to the standby condition. •When no operation is performed for 30 sec., the transceiver
  • Icom F2821D | Instruction Manual - Page 25
    BIIS OPERATION 3 I Transmitting a status D General D Transmitting a status The status message can be selected with the programmed q While in the standby condition, push [P1] (Digital), then 3 text, and the message text is also displayed on the function push [Up] or [Down], or rotate [DIAL]
  • Icom F2821D | Instruction Manual - Page 26
    3 BIIS OPERATION I Transmitting an SDM (Short Data Message) D General The short data message, SDM, can be sent to an individual station or group stations. Also, 8 SDM memory channels are available and the messages can be edited via PC programming. D Transmitting an SDM q While in the standby
  • Icom F2821D | Instruction Manual - Page 27
    BIIS OPERATION 3 D Programming an SDM memory • Available characters (IC-F1821/D or IC-F2821/D only) Key Characters 3 q During standby condition, push [P1] (Digital) twice, then push [Up] or [Down] to select the desired SDM to be edit- [0] 0 1] 1 (space / ed. [2] 2 A B C a b c w Push
  • Icom F2821D | Instruction Manual - Page 28
    3 BIIS OPERATION I Position data transmission I Digital ANI When the optional cable and a GPS receiver is connected to The own ID can be transmitted each time the PTT is pushed the transceiver, the position (longitude and latitude) data can (log-in) or released (log-off) during individual or
  • Icom F2821D | Instruction Manual - Page 29
    a status message is received. This function is convenient when the operator away from the transceiver. Ask your dealer or system operator, or refer to the service manual for connection and setting details. 25
  • Icom F2821D | Instruction Manual - Page 30
    4 CONNECTION AND MAINTENANCE I Rear panel connection Antenna q ANTENNA CONNECTOR Connects to an antenna. Contact your dealer about antenna selection and placement. w Reserved for a future function. e EXTERNAL SPEAKER JACK Connect a 4-8 Ω external speaker. q w e Supplied speaker SP-22 (IC-
  • Icom F2821D | Instruction Manual - Page 31
    I Supplied Accessories Microphone Microphone hanger Microphone and screw set hanger cable DC power cable Speaker* Function name stickers KEY-STICKER 4 CONNECTION AND MAINTENANCE • Function name stickers There are no names on the programmable function keys since the functions can be freely
  • Icom F2821D | Instruction Manual - Page 32
    bracket supplied with your transceiver allows overhead mounting. • Mount the transceiver securely with the 4 supplied screws to a thick surface which can support more than 1.5 kg. Flat washer Spring washer I Optional UT-111 installation Install the optional UT-111 unit as follows: q Turn the
  • Icom F2821D | Instruction Manual - Page 33
    4 CONNECTION AND MAINTENANCE I Optional UT-109 or UT-110 installation I Optional OPC-617 installation Install the OPC-617 as shown below. q Turn the power OFF, then disconnect the DC power cable. w Unscrew the 4 cover screws, then remove the bottom cover. 4 e Cut the pattern on the PCB at the
  • Icom F2821D | Instruction Manual - Page 34
    replacement A fuse is installed in the supplied DC power cable. If a fuse blows or the transceiver stops functioning, track down the source of the problem if possible, and replace the damaged fuse with a new rated one. ❑ Fuse rating: 20 A USE the 20 A fuse only. I Cleaning • RMK-2 SEPARATION KIT
  • Icom F2821D | Instruction Manual - Page 35
    5 SAFETY TRAINING INFORMATION Your Icom radio generates RF electromagnetic To ensure that your exposure to RF electromag- energy during transmit mode. This radio is netic energy is within the FCC allowable limits designed for and classified as "Occupational Use for occupational use, always
  • Icom F2821D | Instruction Manual - Page 36
    A-6406H-1EX-e Printed in Japan © 2004-2007 Icom Inc. Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
INSTRUCTION MANUAL
This device complies with Part 15 of the FCC Rules.
Operation is subject to the condition that this device
does not cause harmful interference.
UHF MOBILE TRANSCEIVER
iF2821/D
iF2721/D
VHF MOBILE TRANSCEIVER
iF1821/D
iF1721/D
Above photo shows the IC-F1721/D or IC-F2721/D.