IC Realtime NVR-716MP Product Manual

IC Realtime NVR-716MP Manual

Get IC Realtime NVR-716MP PDF manuals and user guides View all IC Realtime NVR-716MP manuals
Add to My Manuals
Save this manual to your list of manuals

IC Realtime NVR-716MP manual content summary:

  • IC Realtime NVR-716MP | Product Manual - Page 1
    ICREALTIME Network Video Recorder User's Manual V 3.4.0
  • IC Realtime NVR-716MP | Product Manual - Page 2
    Table of Contents 1 Features and Specifications ...1 1.1 Overview...1 1.2 Features...1 1.3 Specifications...2 2 Front Panel and Rear Panel ...4 2.1 Front Panel...4 2.2 Rear Panel ...5 2.3 Alarm Connection...8 2.4 Bidirectional talk ...8 2.4.1 Device-end to PC-end ...8 2.4.2 PC-end to the device-
  • IC Realtime NVR-716MP | Product Manual - Page 3
    UPNP ...60 Built-in Switch Setup 60 Remote Device ...60 Short-cut Menu ...63 4.8 Advanced...64 4.8.1 HDD Management...65 4.8.2 Abnormality...67 4.8.3 Alarm Output ...68 4.8.4 Manual Record...68 4.8.4.1 Manual record menu 69 4.8.4.2 Basic operation ...69 4.8.4.3 Enable/disable record 69 ii
  • IC Realtime NVR-716MP | Product Manual - Page 4
    4.8.4.4 Enable all channel recording 69 4.8.4.5 Stop all channel recording 70 4.8.5 Account ...71 4.8.5.1 Modify Password ...72 4.8.5.2 Add/Modify Group ...72 4.8.5.3 Add/Modify User ...73 4.8.6 Auto Maintenance ...73 4.8.7 Config Backup...74 4.9 Shutdown...74 5 Quick Configuration Tool...76 5.1
  • IC Realtime NVR-716MP | Product Manual - Page 5
    6.4.2.3 Default & Backup...110 6.4.3 Advanced...111 6.4.3.1 HDD Management 111 6.4.3.2 Abnormity...112 6.4.3.3 Alarm I/O...113 6.4.3.4 Record...114 6.4.3.5 Account ...114 6.4.3.6 Snapshot...116 6.4.3.7 Auto Maintenance ...116 6.4.3.8 Remote device...117 6.4.3.9 Preview Control ...118 6.4.4
  • IC Realtime NVR-716MP | Product Manual - Page 6
    Welcome Thank you for purchasing our network video recorder! This user's manual is designed to be a reference tool for your system. Please open the accessory bag to check the items one by one in accordance with the
  • IC Realtime NVR-716MP | Product Manual - Page 7
    should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair using the same model! Before your operation please read the following instructions carefully. z Installation environment — Keep away from extreme hot places
  • IC Realtime NVR-716MP | Product Manual - Page 8
    Check the following accessories after opening the box： z Please refer to the packing list in the box * vii
  • IC Realtime NVR-716MP | Product Manual - Page 9
    can backup related audio/video data in the network video recorder. • Support Web record and record local video and storage the file in the and display. If bandwidth is big enough, latency is less than 500ms • Support max 10 connections • Transmit audio/video data by HTTP, TCP, UDP, MULTICAST
  • IC Realtime NVR-716MP | Product Manual - Page 10
    . 1.3 Specifications Parameter System Resources Operation System Operation Interface Specifications NVR708MP Series NVR716MP/NVR732MP Series Max support 32-ch high definition with the transmission rate of 4Mbps for each channel; Support 20 online users at the same time, The image delay time
  • IC Realtime NVR-716MP | Product Manual - Page 11
    +12V output. 4 built-in SATA ports. 1 peripheral eSATA port One RS232 port to debug transparent COM data. One RS485 port to control PTZ. Support various protocols. 3 peripheral USB2.0 ports. One RJ45 10/100M/1000Mbps self-adaptive Ethernet port. One power port. AC100～240V 50+2% Hz Power Button One
  • IC Realtime NVR-716MP | Product Manual - Page 12
    2 Front Panel and Rear Panel 2.1 Front Panel The front panel is shown as in Figure 2-1. Figure 2-1 Please refer to the following sheet for detailed information. Name Icon Function Power button USB port Power button, press this button for three seconds to boot up or shut down DVR. To connect
  • IC Realtime NVR-716MP | Product Manual - Page 13
    (Menu prompt) Realize other special functions. In textbox, click this button to switch between numeral, English(Small/Capitalized),donation and etc. Manually stop/start recording, working with direction keys or numeral keys to select the recording channel. Remote control indication light If there is
  • IC Realtime NVR-716MP | Product Manual - Page 14
    2-2 The NVR716MP series rear panel is shown as below. See Figure 2-3. Figure 2-3 Please refer to the following sheet for detailed information. Icon Port Name Function Power button on-off Power on-off button Power input port Input AC 220V. PoE PORTS PoE port Built-in Switch supports PoE
  • IC Realtime NVR-716MP | Product Manual - Page 15
    Icon 1～16 Port Name Function Alarm input port z 1～16 z There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source
  • IC Realtime NVR-716MP | Product Manual - Page 16
    Icon VGA Port Name Function VGA video output port. Output analog video VGA video signal. It can connect to the monitor to view output port analog video. 2.3 Alarm Connection Please refer to the steps listed below. z Connect the alarm input device to the alarm input port. z Connect the alarm
  • IC Realtime NVR-716MP | Product Manual - Page 17
    earphone or sound box at the device-end. See Figure 2-6. Figure 2-6 2.5 Mouse Operation Please refer to the following sheet for mouse operation instruction. Left click When you have selected one menu item, left click mouse to view menu mouse content. Modify checkbox or motion detection status
  • IC Realtime NVR-716MP | Product Manual - Page 18
    In input box, you can select input methods. Left click the corresponding button on the panel you can input numeral/English character (small/capitalized). Here ← stands for backspace button. ＿ stands for space button. In English input mode: _stands for input a backspace icon and ← stands for deleting
  • IC Realtime NVR-716MP | Product Manual - Page 19
    3 HDD Installation Important： Please turn off the power before you replace the HDD. The pictures listed below for reference only. ① Use the screwdriver to loose the screws of the rear panel and then remove the front cover. ② Put the HDD to the HDD bracket in the chassis and then line up the four
  • IC Realtime NVR-716MP | Product Manual - Page 20
    ④ After connect the cable, put the front cover back to the device and then fix screws of the rear panel. 12
  • IC Realtime NVR-716MP | Product Manual - Page 21
    4 GUI Operation Connect the device to the monitor and then connect a mouse and power cable. Click the power button at the rear panel and then boot up the device to view the video output. You can use the mouse to implement some GUI operation. 4.1 Login After device booted up, the system is in
  • IC Realtime NVR-716MP | Product Manual - Page 22
    and exit function. — Right now, system does not support slow playback and backward playback function. z Support digital zoom function. z Support real-time backup function. You can follow the contents listed below for the operation instruction. Preview control interface Move you mouse to the top
  • IC Realtime NVR-716MP | Product Manual - Page 23
    , you can see the free channel is shown as an icon as . 4 Manual Snap Click it to snap manually. Remote device add It is to go to the remote device connection 5 shortcut interface. Support bidirectional talk function with the 6 Bidirectional talk front-end device. 7 Exit Playback
  • IC Realtime NVR-716MP | Product Manual - Page 24
    After you logged in the device, right click mouse, you can see the short cut menu. Please see Figure 4-4. Here you can set local playback window, PTZ control, video color, search records, remote device and etc. The local playback window includes 1/4/8/9/16. You can set the detail channel amount in
  • IC Realtime NVR-716MP | Product Manual - Page 25
    4-6 Please refer to the following sheet for more information. SN Name Display 1 window Function z Here is to display the searched picture or file. z Support 1/4/9/16-window playback. z Here you can select to search the picture or the recorded file. z You can select to play from the read-write
  • IC Realtime NVR-716MP | Product Manual - Page 26
    selection pane. — In 9-window playback mode, you can switch between 1-8 and 9-16 channels. — In 16-window playback mode, you can switch between1-16 and 17-32 channels. z The time bar will change once you modify the playback mode or the channel option. z Double click it, you can view the picture/
  • IC Realtime NVR-716MP | Product Manual - Page 27
    Select the file(s) you want to backup from the file list. System max supports files from four channels. Then click the backup button, now you can backup operation. Check the file again you can cancel current selection. System max supports to display 32 files from one channel. z It is to edit the
  • IC Realtime NVR-716MP | Product Manual - Page 28
    exit. During the file playback process, you can switch to other Manually switch channel channel via the dropdown list or rolling the mouse. 16 progress) have relationship with hardware version. Some series NVRs do not support some functions or playback speeds. 4.5 Information Here is for you to
  • IC Realtime NVR-716MP | Product Manual - Page 29
    4.5.1 HDD Information Here is to list hard disk type, total space, free space, and status. See Figure 4-8. For 32 series product there are max 2 HDDs. For 38 series product there are max 8 HDDs. ○ means current HDD is normal.. - means there is no HDD. If disk is damaged, system shows as "?". Please
  • IC Realtime NVR-716MP | Product Manual - Page 30
    Type Total space Free space Status Bad track The corresponding HDD property. The HDD total capacity. The HDD free capacity. HDD can work properly or not. Display there is bad track or not. Page up Click it to view previous page. Page down Click it to view the next page. View Click it to view
  • IC Realtime NVR-716MP | Product Manual - Page 31
    Figure 4-11 4.5.3 Log Here is for you to view system log file. System lists the following information. See Figure 4-12. Log types include system operation, configuration operation, data management, alarm event, record operation, log clear and etc. z Start time/end time: Pleased select start time and
  • IC Realtime NVR-716MP | Product Manual - Page 32
    Figure 4-13 4.5.4 Version Here is for you to view some version information. See Figure 4-14. z Channel z Alarm in z Alarm out z System version: z Build Date z Web z Serial number Figure 4-14 4.5.5 Online Users Here is for you manage online users connected to the local device. See Figure 4-15. You
  • IC Realtime NVR-716MP | Product Manual - Page 33
    Figure 4-15 4.5.6 Remote Device Information Here you can view the channel status of the remote device, connection log and etc. Channel status: Here you can view the IPC status of the corresponding channel such as motion detect, video loss, camera masking, alarm and etc. See Figure 4-16. Figure 4-16
  • IC Realtime NVR-716MP | Product Manual - Page 34
    "Network adapter name+time". You can use software such as Wireshark to open the packets on the PC for the professional engineer to solve complicated problems. 26
  • IC Realtime NVR-716MP | Product Manual - Page 35
    Figure 4-18 4.5.7.2 Network Load Network load is shown as in Figure 4-19. Here you can view the follow statistics of the device network adapter. Here you can view information of all connected network adapters. The connection status is shown as offline if connection is disconnected. Click one network
  • IC Realtime NVR-716MP | Product Manual - Page 36
    by setting corresponding date setup. z Time format: There are two types: 24-hour mode or 12-hour mode. z Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference
  • IC Realtime NVR-716MP | Product Manual - Page 37
    z Holiday setting: Click it you can see an interface shown as in Figure 4-24. Here you can set holiday date. Please go to the Holidays Period interface to set the holiday date record setup. — When you enable Holiday settings and schedule setup at the same time, holiday setting has the priority. If
  • IC Realtime NVR-716MP | Product Manual - Page 38
    22 Figure 4-23 Figure 4-24 Figure 4-25 4.6.2 Encode Encode setting includes the following items. See Figure 4-26. Please note some series do not support extra stream. z Channel: Select the channel you want. z Type: Please select from the dropdown list. There are three options: regular/motion detect
  • IC Realtime NVR-716MP | Product Manual - Page 39
    in NTSC mode and 1f/s to 30f/s in PAL mode. z Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality. z Quality you mouse to set proper section size. In one channel video, system max supports 4 zones in one channel. — Preview/monitor: privacy mask has two types
  • IC Realtime NVR-716MP | Product Manual - Page 40
    the video before the event occurs into the file. The value ranges from 1 to 30 seconds depending on the bit stream. z Redundancy: System supports redundancy backup function. It allows you backup recorded file in two disks. You can highlight Redundancy button to activate this function. Please note
  • IC Realtime NVR-716MP | Product Manual - Page 41
    menu->Advanced->HDD Management). Please note this function is null if there is only one HDD. z Snapshot: You can enable this function to snapshoot image when an alarm occurs. z Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm. z Holiday: Highlight the button here
  • IC Realtime NVR-716MP | Product Manual - Page 42
    Figure 4-31 4.6.4 RS232 RS232 interface is shown as below. There are five items. See Figure 4-32. z Function: There are various devices for you to select. Console is for you to use the COM or mini-end software to upgrade or debug the program. The control keyboard is for you to control the device via
  • IC Realtime NVR-716MP | Product Manual - Page 43
    Please make sure the port values here do not conflict. z Max connection: system support maximal 20 users. 0 means there is no connection limit. z MTU: It is becomes off. That is to say, MTU modification can affect current network service. System may pop up dialog box for you to confirm setup when you
  • IC Realtime NVR-716MP | Product Manual - Page 44
    4-34 4.6.5.2 IP Filter IP filter interface is shown as in Figure 4-35. You can add IP in the following list. The list supports max 64 IP addresses. System supports valid address of IPv4 and IPv6. Please note system needs to check the validity of all IPv6 addresses. After you enabled trusted sites
  • IC Realtime NVR-716MP | Product Manual - Page 45
    . In Windows XP OS, you can use command "net start w32time" to boot up NTP service. NTP setup interface is shown as in Figure 4-36. z Host IP: Input your PC address. z Port: This series NVR supports TCP transmission only. Port default value is 123. z Update interval: minimum value is 1. Max value
  • IC Realtime NVR-716MP | Product Manual - Page 46
    Here is a sheet for your time zone setup. City /Region Name London Berlin Cairo Moscow New Deli Bangkok Beijing (Hong Kong) Tokyo Sydney Hawaii Alaska Pacific Time(P.T) American Mountain Time(M.T) American Central Time(C.T) American Eastern Time(E.T) Atlantic Time Brazil Middle Atlantic Time Time
  • IC Realtime NVR-716MP | Product Manual - Page 47
    only. 4.6.5.5 PPPoE PPPoE interface is shown as in Figure 4-38. Input "PPPoE name" and "PPPoE password" you get from your ISP (Internet service provider). Click save button, you need to restart to activate your configuration. After rebooting, NVR will connect to internet automatically. The IP in the
  • IC Realtime NVR-716MP | Product Manual - Page 48
    your option. You can also use customized valid domain name (has not registered.). 3) Operation Before you use our quick DDNS, you need to enable this service and set proper server address, port value and domain name. z Server address：www.quickddns.com z Port number：80 40
  • IC Realtime NVR-716MP | Product Manual - Page 49
    relationship with the router's port mapping setting. z Enable Switch : ：It shows that the function of port mapping is enabled in this port. z List： — Service name：Defined by user. — Protocol： Protocol type — Internal port：Port that has been mapped in the router. — External port：Port that has been
  • IC Realtime NVR-716MP | Product Manual - Page 50
    Figure 4-40 Figure 4-41 4.6.5.8 WIFI Setting You can view the WIFI connection status in the Network Setting interface. See Figure 4-42. You can view current connection status and IP address if there is a connection. Figure 4-42 The WIFI interface is shown as below. See Figure 4-43. 42
  • IC Realtime NVR-716MP | Product Manual - Page 51
    z Auto connect WIFI: Check the box here, system automatically connects to the previous WIFI hotspot. z Refresh: You can click it to search the hotspot list again. It can automatically add the information such as the password if you have set it before. z Disconnect: Here you can click it to turn off
  • IC Realtime NVR-716MP | Product Manual - Page 52
    When the hotspot verification type is WEP, system displays as AUTO since the device can not detect its encryption type. z System does not support verification type WPA and WPA2. The display may become abnormal for the verification type and encryption type. After device successfully connected to the
  • IC Realtime NVR-716MP | Product Manual - Page 53
    input receiver email address here. System max supports 3 email boxes. z SSL enable: System supports SSL encryption box. z Interval: The send 4.6.5.10 FTP You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service. Please install Ser-U FTP SERVER first. From "
  • IC Realtime NVR-716MP | Product Manual - Page 54
    ZHY to FTP://10.10.7.7 and then test it can modify or delete H140TU UTH folder or not. See Figure 4-50. Figure 4-50 System also supports upload multiple NVRs to one FTP server. You can create multiple folders under this FTP. In Figure 4-33, select FTP and then double click mouse
  • IC Realtime NVR-716MP | Product Manual - Page 55
    Figure 4-51 Figure 4-52 4.6.5.11 Alarm center Interface is pre-reserved for the users to develop this function. 4.6.5.12 SNMP SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic network management frame of the network management system. The SNMP widely used in many
  • IC Realtime NVR-716MP | Product Manual - Page 56
    , you can use the client-end to access the NVR and etc via the proxy. Here the proxy has a switch function. In the network service, device supports the server address of IPv4 or domain. Please follow the steps listed below to use this function. Please set proxy server address, port, and sub
  • IC Realtime NVR-716MP | Product Manual - Page 57
    4) Now you can boot up the proxy server. When you see the network status is Y, it means your registration is OK. You can view the proxy server when the device is online. Important The server IP address can also be domain. But you need to register a domain name before you run proxy device server.
  • IC Realtime NVR-716MP | Product Manual - Page 58
    interface (Main Menu->Advanced->Record). Please note the manual record has the highest priority. System record all the time no matter there z Tour: Here you can enable tour function when an alarm occurs. System supports 1/8-window tour. Please go to chapter 4.6.9 Display for tour interval setup. Please
  • IC Realtime NVR-716MP | Product Manual - Page 59
    Figure 4-55 Figure 4-56 Figure 4-57 51
  • IC Realtime NVR-716MP | Product Manual - Page 60
    Figure 4-58 For the 32-channel series product, the alarm interface and PTZ setup is shown as below. See Figure 4-59 and Figure 4-60. Figure 4-59 Figure 4-60 4.6.7 Detect Go to Detect Menu In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 4-61.There is three
  • IC Realtime NVR-716MP | Product Manual - Page 61
    setup interface system will not save your zone setup. z Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity. z Period: Click Main Menu->Setting->Schedule) and schedule record in manual record interface(Main Menu->Advanced->Manual Record) z PTZ activation: Here you can
  • IC Realtime NVR-716MP | Product Manual - Page 62
    save button, system goes back to the previous menu. Note: In motion detection mode, you can not use copy/paste to set channel setup since the video in each channel may not be the same. In Figure 4-62, you can left click mouse and then drag it to set a region for motion detection. Click Fn to switch
  • IC Realtime NVR-716MP | Product Manual - Page 63
    Figure 4-64 Figure 4-65 4.6.7.2 Video Loss In Figure 4-61, select video loss from the type list. You can see the interface is shown as in Figure 4-66.This function allows you to be informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message function
  • IC Realtime NVR-716MP | Product Manual - Page 64
    environments light change, the system can alert you to guarantee video continuity. Camera masking interface is shown as in Figure 4-67. You can enable alarm output channel and then enable show message function. You can refer to chapter 4.6.7.1Motion detect for detailed information. Tips: You can
  • IC Realtime NVR-716MP | Product Manual - Page 65
    z Address: Default address is 1. z Baud rate: Select corresponding baud rate. Default value is 9600. z Data bit: Select corresponding data bits. Default value is 8. z Stop bit: Select corresponding stop bits. Default value is 1. z Parity: There are three options: odd/even/none. Default setup is none
  • IC Realtime NVR-716MP | Product Manual - Page 66
    Channel name: Here is for you to modify channel name. System max support 25-digit (The value may vary due to different series). Please note current setup. z Enable tour: Activate tour function. z Interval: System supports 1/4/8/9/16-window tour. Input proper interval value here. The value ranges
  • IC Realtime NVR-716MP | Product Manual - Page 67
    your modification here applies to local end only. You need to refresh web or client-end to get the latest channel name. System max support 25-digital character. 4.6.10 Default Figure 4-73 Click default icon, system pops up a dialogue box. You can highlight setup. z Select all z General z Encode
  • IC Realtime NVR-716MP | Product Manual - Page 68
    z Display z Channel name Please highlight icon to select the corresponding function. After all the setups please click OK button, system goes back to the previous menu. Warning! System menu color, language, time display mode, video format, IP address, user account will not maintain previous setup
  • IC Realtime NVR-716MP | Product Manual - Page 69
    to connect to the selected device and add it to the Added device list. Support Batch add. z Show filter: You can use it to display the specified to set video noise. Check Auto, system automatically sets video gain. Check Manual, you can set gain threshold, brightness and etc. — Gain threshold:
  • IC Realtime NVR-716MP | Product Manual - Page 70
    4-78 Click the Manual Add button; you can go to the following interface. See Figure 4-79. This series product max supports 32-channel standard definition video/high definition non-real-time video and the transmission rate is 1Mbps per channel. It can also max supports 4-channel high definition
  • IC Realtime NVR-716MP | Product Manual - Page 71
    8-channel 1080p/5Mbps (extra stream D1/1Mbps), 16-channel 720p/2Mbps (extra CIF/640kbps), 32-channel D1/1Mbps. This series product supports the IPC from many popular manufactures such as Sony, Hitachi, dynacolor, Axis, Samsung, arecont, Dahua, onvif and custom type. You can just input URL address
  • IC Realtime NVR-716MP | Product Manual - Page 72
    Figure 4-80 Figure 4-81 4.8 Advanced Double click advanced icon in the main window, the interface is shown as below. See Figure 4-82.There are total eight function keys: HDD management, alarm output, abnormity, manual record, account, auto maintenance, TV adjust and video matrix. 64
  • IC Realtime NVR-716MP | Product Manual - Page 73
    Figure 4-82 4.8.1 HDD Management Here is for you to view and implement hard disk management. See Figure 4-83. You can see current HDD type, status, capacity and record time. When HDD is working properly, system is shown as O. When HDD error occurred, system is shown as X. z Alarm set: Click alarm
  • IC Realtime NVR-716MP | Product Manual - Page 74
    is only available for read-write HDD and self-defined disks, other types of hard disks cannot be set as HDD Group. Important: z eSATA also supports this function, you can manage e-SATA hard disk as local hard disk. z Current series software version can only set the HDD group operation of the
  • IC Realtime NVR-716MP | Product Manual - Page 75
    Figure 4-85 Channels Setting Click the button named with "Channels Settings" at the top right corner of the Figure 4-83, system will pop up an interface shown as in Figure 4-86. You can set HDDs for main stream, extra stream and snap pictures respectively. The main stream and extra stream of one
  • IC Realtime NVR-716MP | Product Manual - Page 76
    icon to select the corresponding alarm output. After all the setups please click OK button, system goes back to the previous menu. See Figure 4-88. 4.8.4 Manual Record Figure 4-88 68
  • IC Realtime NVR-716MP | Product Manual - Page 77
    rights to implement the following operations. Please make sure the HDD has been properly installed. 4.8.4.1 Manual record menu Right click mouse or in the main menu, Advanced->Manual Record. Manual record menu is shown as in Figure 4-89. 4.8.4.2 Basic operation There are three statuses: schedule
  • IC Realtime NVR-716MP | Product Manual - Page 78
    up you have set in will be null ((Main menu->Setting->Schedule)). You can see indication light in front panel turns on, system begins manual record now. Figure 4-92 4.8.4.5 Stop all channel recording Please highlight "ALL" after "Stop". See Figure 4-93. System stops all channel recording no matter
  • IC Realtime NVR-716MP | Product Manual - Page 79
    Figure 4-93 4.8.5 Account Here is for you to implement account management. See Figure 4-94. Here you can: z Add new user z Modify user z Add group z Modify group z Modify password. For account management please note: z For the user account name and the user group, the string max length is 6-byte.
  • IC Realtime NVR-716MP | Product Manual - Page 80
    Figure 4-94 4.8.5.1 Modify Password Click password button, the interface is shown as in Figure 4-95. Here you can modify account password. Please select the account from the dropdown list, input the old password and then input the new password twice. Click the Save button to confirm current
  • IC Realtime NVR-716MP | Product Manual - Page 81
    Figure 4-96 4.8.5.3 Add/Modify User Click add user button, the interface is shown as in Figure 4-97. Please input the user name, password, select the group it belongs to from the dropdown list. Then you can check the corresponding rights for current user. For convenient user management, usually we
  • IC Realtime NVR-716MP | Product Manual - Page 82
    backup interface is shown as below. See Figure 4-99. This function allows you to copy current system configuration to other devices. It also supports import, create new folder, delete folder and etc function. Figure 4-99 4.9 Shutdown Double click shutdown button, system pops up a dialogue box for
  • IC Realtime NVR-716MP | Product Manual - Page 83
    Figure 4-100 75
  • IC Realtime NVR-716MP | Product Manual - Page 84
    5 Quick Configuration Tool 5.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 5.2 Operation Double click the "ConfigTools.exe" icon,
  • IC Realtime NVR-716MP | Product Manual - Page 85
    invalid. Figure 5-4 After you logged in, the configuration tool main interface is shown as below. See Figure 5-5. Please refer to the Quick Configuration Tool User's Manual included in the resources CD for detail information. 77
  • IC Realtime NVR-716MP | Product Manual - Page 86
    Figure 5-5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User's Manual included in the resources CD. 78
  • IC Realtime NVR-716MP | Product Manual - Page 87
    please close all web pages, otherwise the un-installation might result in error. z Current series product supports various browsers such as Safari, firebox browser, Google browser. Device only support 1-channel monitor on the Apple PC. About PoE address setup, operation and allocation. 1) Insert PoE
  • IC Realtime NVR-716MP | Product Manual - Page 88
    b) If it is your second time to insert the PoE, system can check the saved MAC address according to --- map to make sure current IPC has connected or not. If system finds the previous information and the channel is idle, system can map it to the previously used channel. Otherwise
  • IC Realtime NVR-716MP | Product Manual - Page 89
    Figure 6-2 IE Safety Setup After installation, the interface is shown as below. See Figure 6-3. Figure 6-3 Login interface Please input your user name and password. Default factory name is admin and password is admin. Note: For security reasons, please modify your password after you first login. 6.2
  • IC Realtime NVR-716MP | Product Manual - Page 90
    For the LAN mode, after you logged in, you can see the main② window. See Figure 6-4. ③ ① ④ ⑤ ⑥ Figure 6-4 Main Interface There are six sections: z Section 1: Monitor channel menu tree z Section 2: System menu z Section 3: PTZ control z Section 4: Video setup and other setup z Section 5: Preview
  • IC Realtime NVR-716MP | Product Manual - Page 91
    Figure 6-5 Monitor Channel Menu Tree Please refer to the following sheet for detailed information. Parameter Function CAM 1 to CAM channel 1 to channel 16 16 Open all /close Click this button to open all video channels. all Once all video channels are open, it becomes close all button. Start
  • IC Realtime NVR-716MP | Product Manual - Page 92
    Local play The Web can playback the saved (Extension name is dav) files in the PC-end. Click local play button, system pops up the following interface for you to select local play file. See Figure 6-6. Refresh Figure 6-6 Click this button to refresh monitor channel name. Please left click one
  • IC Realtime NVR-716MP | Product Manual - Page 93
    , and PTZ setup button. Please note: open menu/close menu/up/down/left/right/confirm/cancel buttons are for speed dome only. z PTZ direction: PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom left/bottom right. z Speed: The step 8 speed is faster than step 1. 85
  • IC Realtime NVR-716MP | Product Manual - Page 94
    You can click this icon to display or hide the PTZ control platform. Figure 6-10 PTZ Interface Click PTZ set button, the interface is shown as in Figure 6-11. Figure 6-11 PTZ Setup 86
  • IC Realtime NVR-716MP | Product Manual - Page 95
    can click video switch button. Light/wiper You can control the light and wiper of the peripheral device. Please note the peripheral device shall support this function. 6.2.5 Color and More Setup Color and other setup interface are shown as in Figure 6-12. Figure 6-12 Color Please refer to the
  • IC Realtime NVR-716MP | Product Manual - Page 96
    It is to adjust monitor video contrast ness. It is to adjust monitor video saturation. It is to adjust monitor video hue. All the operation here applies to WEB end only. Reset Restore system default value. Click more button, the interface is shown as in Figure 6-13. Figure 6-13 Color and More
  • IC Realtime NVR-716MP | Product Manual - Page 97
    Figure 6-14 Please refer to the following contents for LAN and WAN login difference. 1) In the WAN mode, system opens the main stream of the first channel to monitor by default. The open/close button on the left pane is null. 2) You can select different channel and different monitor mode at the
  • IC Realtime NVR-716MP | Product Manual - Page 98
    Figure 6-16 5) If you login via the WAN mode, system does not support alarm activation to open the video function in the Alarm setup interface. Important z adopts extra stream to monitor by default. You can not modify manually. All channels are trying to synchronize. Please note the synchronization
  • IC Realtime NVR-716MP | Product Manual - Page 99
    Figure 6-17 Version Information 6.4.1.2 HDD information Here you can view local storage status such as free capacity and total capacity. See Figure 6-18. Figure 6-18 HDD Information 6.4.1.3 Log Here you can view system log. See Figure 6-19 91
  • IC Realtime NVR-716MP | Product Manual - Page 100
    and then click search button to view the list. You can click this button to delete all displayed log files. Please note system does not support clear by type. You can click this button to backup log files to current PC. 6.4.2 System Configuration Please click save button to save your current
  • IC Realtime NVR-716MP | Product Manual - Page 101
    Figure 6-20 General Setup Figure 6-21 DST Figure 6-22 DST Please refer to the following sheet for detailed information. Parameter Function System Time Here is for you to modify system time. Please click Save button after your completed modification Sync PC You can click this button to save
  • IC Realtime NVR-716MP | Product Manual - Page 102
    are using one remote control to manage multiple devices, you can give a serial numbers to the device. Please note current series product does not support this function. Here you can view video format such as PAL. 6.4.2.2 Encode The encode interface is shown as in Figure 6-23. Figure 6-23 Encode
  • IC Realtime NVR-716MP | Product Manual - Page 103
    stream types are D1/HD1/2CIF/CIF/QCIF Channel 1～16 extra code stream supports CIF/QCIF. Frame rate PAL: 1f/s-25f/s；NTSC: 1f/s-30f/s Bit rate can privacy mask the specified video in the monitor video. One channel max supports 4 privacy mask zones. The privacy mask includes two options: Never/monitor
  • IC Realtime NVR-716MP | Product Manual - Page 104
    Figure 6-25 Schedule Time Figure 6-26 Copy Figure 6-27 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel first. 96
  • IC Realtime NVR-716MP | Product Manual - Page 105
    Parameter Pre-record Setup Holiday Copy Function Please input pre-record value here. When alarm record or motion detection record occurs, system can record the several seconds video before activating the record operation into the file. (Depends on data size). In Figure 6-24, click set button, you
  • IC Realtime NVR-716MP | Product Manual - Page 106
    6-29 Network Please refer to the following sheet for detailed information. Parameter Function IP Version There are two options: IPv4 and IPv6. Right now, syste supports these two IP address format and you can access v them. 98
  • IC Realtime NVR-716MP | Product Manual - Page 107
    Parameter MAC Address IP Address Subnet Prefix Default Gateway Function The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It is read-only. Here you can use up/down button (ST) or input the corresponding number to input IP address. Then you can set the
  • IC Realtime NVR-716MP | Product Manual - Page 108
    Parameter Function Remote host PPPOE — Input the user name and password which ISP(Internet service supplier) provided and chose enable. — Reboot system after configuration is saved and the device will auto connect to Internet. The IP address is the WAN
  • IC Realtime NVR-716MP | Product Manual - Page 109
    Parameter Subject Address Interval Function Input email subject here. Max 32-digit. Input receiver email address here. Max input three addresses. Please input the send interval value here. DDNS The DDNS interface is shown as in Figure 6-32. Figure 6-32 DDNS Please refer to the following sheet
  • IC Realtime NVR-716MP | Product Manual - Page 110
    option. You can also use customized valid domain name (has not registered.). 3) Operation Before you use our private DDNS, you need to enable this service and set proper server address, port value and domain name. z Server address：www.quickddns.com z Port number：80 z Domain name：There are two modes
  • IC Realtime NVR-716MP | Product Manual - Page 111
    setup interface. See Figure 6-34. z .Please set schedule period and then select corresponding record type: schedule/alarm. Please note device does not support motion detect record function now. z Please select date (Current setup applies to current day by default. You can draw a circle before the
  • IC Realtime NVR-716MP | Product Manual - Page 112
    following sheet for detailed information. Parameter Function Enable Enable NTP function or not. Server IP Server IP address Port Server port. System supports TCP only and default port value is 123. Time Zone Device current time zone. Update Interval Time update interval value. Alarm
  • IC Realtime NVR-716MP | Product Manual - Page 113
    Figure 6-36 Alarm Centre UNPN Go to the UPnP interface, you can see an image is shown as in Figure 6-37. It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPNP item. Figure 6-37 UNPN SNMP The SNMP interface is shown as
  • IC Realtime NVR-716MP | Product Manual - Page 114
    Please refer to chapter 4.6.5.12 SNMP for detailed information. Figure 6-38 SNMP 6.4.2.6 Alarm Alarm setup interface is shown as in Figure 6-39. Figure 6-39 Alarm Setup 106
  • IC Realtime NVR-716MP | Product Manual - Page 115
    Figure 6-40 PTZ Setup Figure 6-41 Please refer to the following sheet for detailed information. Parameter Function Event Type Event type: There are four types. Local input/network input/IPC external/IPC offline alarm. — Local input alarm: The alarm signal system detects from the alarm input
  • IC Realtime NVR-716MP | Product Manual - Page 116
    Parameter Function Type There are two options: normal open and normal close. NO becomes activated in low voltage, NC becomes activated in high voltage. Period Alarm record function becomes activated in the specified periods. There are six periods in one day. Please draw a circle to enable
  • IC Realtime NVR-716MP | Product Manual - Page 117
    detect, video loss and video masking Select a channel from the dropdown list to set motion detect, video loss and vid masking function. System supports 6 levels. The sixth level has the highest sensitivity. Check the box to enable this function. There are PAL22X18/NTSC22X15 small zones. Blue area
  • IC Realtime NVR-716MP | Product Manual - Page 118
    PTZ interface is shown as in Figure 6-43 Please note, before operation please make sure you have set speed dome address and the NVR and speed dome connection is OK. Figure 6-43 PTZ Please refer to the following sheet for detailed information. Parameter Function Channel You can select monitor
  • IC Realtime NVR-716MP | Product Manual - Page 119
    Figure 6-44 Default and Backup Please refer to the following sheet for detailed information. Parameter Function Select All Restore factory default setup. Export Export system configuration to local PC. Configuration Import Import configuration from PC to the system. Configuration 6.4.3
  • IC Realtime NVR-716MP | Product Manual - Page 120
    Set current HDD as read. Redundant Recover Set current HDD as redundant HHD. Fix the HDD error. Right now the device does not support this function. 6.4.3.2 Abnormity The interface is shown as in below. See Figure 6-46 and Figure 6-47. Figure 6-46 Abnormity -1 Figure 6-47 Abnormity -2 Please
  • IC Realtime NVR-716MP | Product Manual - Page 121
    Parameter Function Event Type The abnormal events include: no disk, no space, disk error, offline, IP conflict. You need to draw a circle to enable this function. Threshold: It refers to the HDD free space threshold. Normal Out The corresponding alarm output channel when an alarm occurs. The
  • IC Realtime NVR-716MP | Product Manual - Page 122
    click the corresponding number and then click the trigger button. Trigger Refresh Enable/disable alarm output. Please note once you activate an alarm manually, you need to click the output channel number again and then click trigger button to disable it. Otherwise the alarm can not be cancelled
  • IC Realtime NVR-716MP | Product Manual - Page 123
    Figure 6-50 Account Figure 6-51 Add user Please refer to the following sheet for detailed information. Parameter Function User Input the user name of the new established account. Reusable The reusable account means that this account can be used in more than one PC at the same time. 115
  • IC Realtime NVR-716MP | Product Manual - Page 124
    Password Confirm Group Memo Authority/All Input the password of the new established account. Input the password of the new established account again. Select the group which the new account belongs to. Memo about the new account User can select all to entitle this account to all authorities or set
  • IC Realtime NVR-716MP | Product Manual - Page 125
    Figure 6-53 Auto Maintenance 6.4.3.8 Remote device Remote device interface is shown as in Figure 6-54. Figure 6-54 Remote device 117
  • IC Realtime NVR-716MP | Product Manual - Page 126
    default),UDP. Please input remote device IP address, port number, remote device channel number and account manually. User/password Please input account to login the remote device. Manual add Click the Manual add button, you can see an interface shown as in Figure 6-55. You can input remote device
  • IC Realtime NVR-716MP | Product Manual - Page 127
    Figure 6-56 Preview Control 6.4.4 Additional Function 6.4.4.1 IPC Config IPC configuration interface is shown as in Figure 6-57. Here you can set gain, iris, brightness, contrastness, hue, saturation BLC and etc of the network camera. Figure 6-57 IPC Config Please refer to the following sheet for
  • IC Realtime NVR-716MP | Product Manual - Page 128
    . This function is disabled by default. Gain Mode Gain Adjust WB It is to set video noise. Check Auto, system automatically sets video gain. Check Manual, you can set gain threshold, brightness and etc. Gain threshold: Here is for you to set gain value. The different series product has different
  • IC Realtime NVR-716MP | Product Manual - Page 129
    Mirror Flip Watermark It is to switch video left and right limit. This function is disabled by default. It is to switch video up and bottom limit. This function is disabled by default. Please note the video resolution shall be 720P or lower when it is to flip 90°. Enable this function to check the
  • IC Realtime NVR-716MP | Product Manual - Page 130
    Figure 6-59 Mobile Setup 6.4.4.4 WIFI Config The WIFI interface is shown as in Figure 6-60. Here you can view WIFI connection status. System displays as no connection if there is no connection. You can view connection status and IP address if there is a connection. See Figure 6-61. Figure 6-60 WIFI
  • IC Realtime NVR-716MP | Product Manual - Page 131
    Figure 6-61 Please refer to the following sheet for detailed information. Parameter Function Refresh Search hotspot again and system can automatically add the information such as password (If there is any record of the hotspot.) WIFI working information Here you can view current connection
  • IC Realtime NVR-716MP | Product Manual - Page 132
    Figure 6-62 Then please click search button, you can see the corresponding files in the list. See Figure 7-61. Figure 6-63 Select the file(s) you want to download and then click download button, system pops up a dialogue box shown as in Figure 7-62, then you can specify file name and path to
  • IC Realtime NVR-716MP | Product Manual - Page 133
    Figure 6-64 Load more It is for you to search record or picture. You can select record channel, record type and record time to download. See Figure 6-65. Figure 6-65 In Figure 6-65, there is a remote back pane at the left bottom of the pane. It allows you to backup the record or picture to your
  • IC Realtime NVR-716MP | Product Manual - Page 134
    corresponding interface. For motion detect, video loss, camera masking, you need to set the event in the motion detection interface. Current series product does not support this function. 126
  • IC Realtime NVR-716MP | Product Manual - Page 135
    Figure 6-67 Alarm Please refer to the following sheet for detailed information. Type Parameter Function Alarm Video loss System alarms when video loss occurs. Type Motion detection System alarms when motion detection alarm occurs, Disk full System alarms when disk is full. Disk error
  • IC Realtime NVR-716MP | Product Manual - Page 136
    Type Parameter Sound pop up Path Function System sends out alarm sound when an alarm occurs. You can specify as you wish. Here you can specify alarm sound file. 6.7 About Click about button, you can view the web information. See Figure 6-68. Figure 6-68 About 6.8 Log out Click log out button,
  • IC Realtime NVR-716MP | Product Manual - Page 137
    z HDD malfunction or something wrong with HDD ribbon. z Seagate DB35.1，DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem. z Front panel error. z Main board is damaged. 2. Device often automatically shuts down or stops running. There are
  • IC Realtime NVR-716MP | Product Manual - Page 138
    low. z Program read error, bit data is too small. There is mosaic in the full screen. Please restart the device to solve this problem. z HDD data ribbon error. z HDD malfunction. z Device hardware malfunctions. 8. There is no audio when monitor. There are following possibilities: z It is not a power
  • IC Realtime NVR-716MP | Product Manual - Page 139
    z PTZ decoder and device address is not compatible. z When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable. z The distance is too far. 12. Motion detection
  • IC Realtime NVR-716MP | Product Manual - Page 140
    There are following possibilities: z Alarm setup is not correct. z Alarm output has been open manually. z Input device error or connection is not correct. z Some program versions may have this problem. Please upgrade your system. 19. Alarm function is null. There are following possibilities: z Alarm
  • IC Realtime NVR-716MP | Product Manual - Page 141
    .exe in Windows XP OS. 23. I forgot local menu operation password or network password Please contact your local service engineer or our sales engineer for help. We can guide you to solve this problem. 24. There is no video. The screen is in black. There are following possibilities: z IPC IP address
  • IC Realtime NVR-716MP | Product Manual - Page 142
    8 Appendix A HDD Capacity Calculation Calculate total capacity needed by each device according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity qi that is the capacity of each channel needed for each hour, unit
  • IC Realtime NVR-716MP | Product Manual - Page 143
    9 Appendix B Compatible SATA HDD Manufacturer Series Seagate Seagate SV35.1 Model ST3250824SV Seagate Seagate SV35.1 ST3500641SV Seagate Seagate SV35.2 ST3250820SV Seagate Seagate SV35.2 ST3320620SV Seagate Seagate SV35.2 ST3500630SV Seagate Seagate SV35.2 ST3750640SV Seagate Seagate
  • IC Realtime NVR-716MP | Product Manual - Page 144
    Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate Seagate HD2 Seagate Pipeline ST3500414CS HD2 Seagate Pipeline ST3500312CS HD2 Seagate Pipeline ST31000424CS HD2 Seagate Pipeline ST31000322CS HD2
  • IC Realtime NVR-716MP | Product Manual - Page 145
    Seagate Seagate Seagate Seagate Seagate Seagate Seagate Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Constellation ES Seagate Constellation ES Seagate Constellation ES.2
  • IC Realtime NVR-716MP | Product Manual - Page 146
    Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem WD AV-AVJS
  • IC Realtime NVR-716MP | Product Manual - Page 147
    Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Westem Digital Samsung Samsung Samsung Samsung Samsung Samsung Hitachi Hitachi Hitachi Hitachi Maxtor Maxtor WD AV-GP WD20EURS WD AV-GP WD15EURS WD AV-GP WD10EURS WD AV-GP
  • IC Realtime NVR-716MP | Product Manual - Page 148
    10 Appendix C Compatible USB2.0 List Manufacturer Sandisk Model Cruzer Micro Sandisk Cruzer Micro Sandisk Cruzer Micro Sandisk Cruzer Freedom Sandisk Cruzer Freedom Sandisk Cruzer Fredom Sandisk Cruzer Freedom Kingston Data Traveler II Kingston Data Traveler II Kingston Data
  • IC Realtime NVR-716MP | Product Manual - Page 149
    Teclast Teclast Teclast Ti Cool Ti Cool Ti Cool 512M 1G 2G 141
  • IC Realtime NVR-716MP | Product Manual - Page 150
    11 Appendix D Compatible Displayer List Brand BENQ（LCD） DELL（LCD） BENQ（LCD） BENQ（LCD） LENOVO（LCD） SANGSUNG（LCD） LENOVO(CRT) LENOVO(CRT) LENOVO(CRT) Samsung (LCD) Samsung (LCD) Samsung (LCD) Samsung (LCD) Samsung (LCD) Samsung (LCD) LG（LCD） LG（LCD） LG（LCD） BENQ（LCD） BENQ（LCD） PHILIPS（LCD） PHILIPS（
  • IC Realtime NVR-716MP | Product Manual - Page 151
    local authorities to process according to your local government statutes. Note • • • • • This manual is for reference only. Slight difference may be found in the user interface. All the designs and of us. Please visit our website or contact your local service engineer for more information. 143
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
ICREALTIME Network Video Recorder
User’s Manual
V 3.4.0