IC Realtime ICIP-D2001-IR-D-2.8 Product Manual
IC Realtime ICIP-D2001-IR-D-2.8 Manual
 |
View all IC Realtime ICIP-D2001-IR-D-2.8 manuals
Add to My Manuals
Save this manual to your list of manuals |
IC Realtime ICIP-D2001-IR-D-2.8 manual content summary:
- IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 1
HD IR Vandal Proof Network Dome Camera Quick Start Guide Version 1.1.1 - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 2
you use this series product! Please keep this user's manual well for future reference! Important Safeguards and Warnings 1．Electrical caused by improper handling or installation. We are not liable for any problems caused by unauthorized modification or attempted repair. 2．Environment Please don't - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 3
product update; the upgraded content will be added in the manual without prior announcement. Please contact the supplier or customer service if there is any problem occurred when using the device. Please contact the customer service for the latest procedure and supplementary documentation. There may - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 4
Please refer to the disk for more details, check and download corresponding user's manual and tool. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 5
Table of Contents 1 Device Structure ...1 1.1 Structure Components 1 1.2 Framework and Dimension 1 1.3 Alarm Setup...2 2 Device Installation ...4 2.1 Installation Steps ...4 2.2 Micro SD Card Installation 6 3 Network Configuration ...7 3.1 Modify IP Address ...7 3.2 Login WEB Interface ...8 iv - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 6
1 Device Structure 1.1 Structure Components Note: The following figure is for reference only, which is used to know the components and cable port function. There are differences about structure components and cables between different models, please refer to the actual object for more details. You - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 7
Figure1-2 1.3 Alarm Setup Note: Only supported by some series products. Figure1-3 Alarm input, output description: Step 1 Connect alarm input device to the alarm input of I/O cable. Step 2 Connect alarm output device - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 8
Figure 1-4 Please refer to the following figure for alarm output information. See Figure 1-5 When alarm output is OC, it needs to increase pull-up resistance externally to work normally; output signal is high and low level. After external pull-up resistance is increased, the default of output signal - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 9
, please refer to Figure 2-1 according to the actual product. Before the installation, please make sure the installation environments can at least support 3x weight of the camera and the bracket. Figure 2-1 Device installation illustration Step 1 Use inner hex wrench in the accessories bag to - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 10
by some models). Some models do not have vertical rotating ring component, which does not support image rotation, please refer to the actual product. There are some differences about IR light layout for some models, please refer to the actual products. Step 6 Take up the dome enclosure, put - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 11
2.2 Micro SD Card Installation Note: Some series products do not support the Micro SD card function, which can't be applied to the following chapter. Please shut down the power and then turn off the device before - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 12
in the network parameters of the WEB interface, please refer to the document in the disk > for more details. Note: Currently the quick configuration tool only supports the cameras which apply to the same network segment with computer IP address. Step 1 Double click the - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 13
WEB Interface Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to the document in the disk and the actual interface for more details Step 1 Open IE and input the modified camera IP address in the address bar - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 14
Figure 3-3 Step 3 Install controls according to the system prompt; see Figure 3-4 for the WEB main interface. Please modify the administrator password as soon as possible after you successfully logged in. Figure 3-4 9 - IC Realtime ICIP-D2001-IR-D-2.8 | Product Manual - Page 15
Note: This quick start guide is for reference only. Slight difference may be found in user interface. All the designs and software uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
HD IR Vandal Proof Network Dome Camera
Quick Start Guide
Version 1.1.1