IC Realtime HDVR-EL3200-2U5MP-AI2-WEB Quick Start Guide

IC Realtime HDVR-EL3200-2U5MP-AI2-WEB Manual

IC Realtime HDVR-EL3200-2U5MP-AI2-WEB manual content summary:

  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 1
    HD Analog Video Recorder 2U Quick Start Guide V1.01 Table Of Contents Getting Started A. Inspecting the Components 1 B. Rear Panel Identifi Requirement ● Install the PoE front-end device indoors. ● The Device does not support wall mount. ● Do not place and install the device in an area exposed
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 2
    1B. Rear Panel Identification The actual appearance may differ depending on the model purchased. 1. Power Input Port 2. Power On/Off Switch 3. BNC Ports 4. Ethernet Port(s) 5. VGA Port 6. HDMI Port(s) 2 | www.icrealtime.com 7. Channel Audio Input 8. Audio Input/ Output (for 2 way talk) 9. RS232
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 3
    2A. BOOTING UP 1.1 - Prerequisites ● System is being supplied appropriate power. ● A network cable is connected to a router for local and remote access. ● A mouse and display are connected to the machine to interact with the menus. 2B. DEVICE INITIALIZATION 1.1 - Region Settings ● Select region and
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 4
    from the router. You may set on static after it has acquired an IP from the local network. ● Disable DHCP and program IP address manually if using a static IP address. 1.2 - Timezone ● Select appropriate time zone (UTC/GMT). ● Enable Daylight Savings Time (DST) if applicable. DST settings should be
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 5
    STARTUP WIZARD (cont) 1.5 - Encode Settings (optional) ● Lower encode settings to optimize maximum recording time. ● Recommended values are: H.265, 15FPS, VBR, 6(Best). STARTUP WIZARD (cont) 1.7- Record & Snapshot Schedule (optional) ● Click any of the setup icons to the right of the timeline ●
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 6
    4A. P2P setup to Phone App: ● Log in to the local or web interface and select Main Menu> NETWORK>P2P. ● Enable the P2P checkbox. The Status should be: Online or Connect Success. ● Tap on the "+" icon on the upper right. Select Wired Device then tap on P2P. ● Open the phone app (ICRSS Pro or IC
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 7
    says Offline even though I followed the steps in the guide The machine may not have pulled an IP address from HD recorders have specific resolutions and formats that they can support. Ensure the camera models are running in a supported resolution. All specifications can be found on the appropriate
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 8
    change passwords regularly to reduce the risk of being guessed or cracked. ● Maintain and Update Password Reset Information. The equipment supports password reset function. Please set up related information for password reset, including the end user's mailbox and password protection questions. If
  • IC Realtime HDVR-EL3200-2U5MP-AI2-WEB | Quick Start Guide - Page 9
    , UPnP, etc., to reduce risks. If necessary, it is highly recommended that you use safe modes, including but not limited to the following services: SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication passwords. SMTP: Choose TLS to access mailbox server. FTP: Choose SFTP
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

°uick ±tört Iuide ß1.01
HD Analog Video
Recorder ±U
Getting Started
².
³nspecting the !omponents
´.
µeör ¶önel ³dentificötion
Device Setup
².
´ooting Èp
´.
'evice ³nitiölizötion
!.
±törtup àizörd
Web Operation
².
²ccessing àeb ³nterföce
Remote Access
².
¶2¶ setup to ¶hone ²pp
Appendices
².
G²°
´.
·oxic or ¸özördous möteriöls or
¹lements
!.
!ybersecurity µecommendötions
1
2
3
3
²³´
5
6
7
7
8-9
Table Of Contents
www.icreöltime.com
IMPORTANT SAFEGUARDS AND WARNINGS
Operating Requirement
Ƭ
³nstöll the ¶o¹ front-end device indoors.
Ƭ
·he 'evice does not support wöll mount.
Ƭ
'o not plöce önd instöll the device in ön öreö exposed to direct sunlight or neör heöt
generöting devices.
Ƭ
'o not instöll the device in ö humid, dusty or fuliginous öreö
Ƭ
ºeep its horizontöl instöllötion, or instöll it öt stöble plöces, önd prevent it from fölling.
Ƭ
'o not drip or splösh liquids onto the device; don’t put on the device önything filled
with liquids, in order to prevent liquids from flowing into the device.
Ƭ
³nstöll the device öt well-ventilöted plöces; don’t block its ventilötion opening.
Ƭ
Èse the device only within röted input önd output rönge
Ƭ
'o not dismöntle the device örbitrörily.
Ƭ
·rönsport, use önd store the device within öllowed humidity önd temperöture rönge.
Electrical Safety
Ƭ
³mproper böttery use might result in fire, explosion, or inflömmötion.
Ƭ
àhen replöcing böttery, möke sure the söme model is used.
Ƭ
Èse the recommended power cöbles in the region önd conform to the röted power
specificötion
Ƭ
Èse the power ödöpter provided otherwise, it möy result in injury önd device dömöge.
Ƭ
·he power source shöll conform to the requirement of the ±öfety ¹xtrö »ow ßoltöge
(±¹»ß) stöndörd, önd supply power with röted voltöge which conforms to »imited
power ±ource requirement öccording to ³¹!60950-1. ¶leöse note thöt the power
supply requirement is subject to the device löbel.
Ƭ
!onnect the device (³-type structure)to the power socket with protective eörthing.
µA¶ Inspecting the Components
Items
Detail
Inspect
¶öcköge
Ƭ
²ppeörönce
Ƭ
¶öcking ¼öteriöls
Ƭ
²ccessories
Ƭ
²ny obvious dömöge on box
Ƭ
´roken or distorted positions due to physicöl öbuse
Ƭ
·he öccessory box should höve öll möteriöls (ie: extrö
±²·² cöbles, µemote, ¶ower cord)
»öbels
Ƭ
»öbels !ontöining the
±eriöl
½umber
öre
locöted on 'evice önd
in box
Ƭ
·he seriöl numbers on the »öbels öre in vitöl in
tröcking the device in our dötöböse.
¹nsure they öre
not torn or lost.
'evice
Ƭ
²ppeörönce
Ƭ
'ötö, power, önd fön
cöbles, möinboörd
Ƭ
²ny obvious dömöge
Ƭ
»oose connections