Hitachi X807 User Guide
Hitachi X807 - CP XGA LCD Projector Manual
 |
UPC - 050585151277
View all Hitachi X807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi X807 manual content summary:
- Hitachi X807 | User Guide - Page 1
Projector CP-X807 User's Manual (detailed) - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for - Hitachi X807 | User Guide - Page 2
, Setup, Selecting an input signal 18 Projector name, e-shot, Information, Searching an input signal 19 Service Selecting an aspect ratio 19 Maintenance 65 Adjusting the zoom and focus. . . . . . 20 Lamp 65 Adjusting the lens shift 20 Air filter 67 Using the automatic adjustment feature - Hitachi X807 | User Guide - Page 3
a large projected image from even a short distance. Preparations Contents of package Please see the "Contents of package" in the "User's Manual (concise)" which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything is missing. NOTE • Keep the - Hitachi X807 | User Guide - Page 4
names Projector (1) Speakers (x 4) (&38). (2) Focus ring (&20) (3) Zoom ring (&20) (4) Lamp cover (&65) The lamp unit is inside. (5) Lens shift cover (&20) (6) Horizontal lens shift dial (&20) (7) Vertical lens shift dial (&20) (8) Front cover (9) Lens (&70) (10) Lens cover (&3) (11) Remote sensors - Hitachi X807 | User Guide - Page 5
17) (5) TEMP indicator (&72) (6) LAMP indicator (&72) Rear panel (6) (5) (4) 4 AUDIO OUT HDMI RGB2 G/Y B/CB/PB B/CR/PR H V REMOTE CONTROL USB CONTROL I O AC IN (Y, CB/PB, CR/PR) projector from falling down, since it is not designed for it. ►Use the shutdown switch only when the projector - Hitachi X807 | User Guide - Page 6
RESET POSITION AUTO MAGNIFY ON OFF FREEZE MY BUTTON 1 2 KEYSTONE VOLUME MUTE SEARCH (27) (21) (23) (29) (24) (10) (18) (5) (6) (9) (19) Back of the remote control WARNING ►Do not look into the beam outlet and point the beam at people and pets while pressing the LASER button, since the beam - Hitachi X807 | User Guide - Page 7
humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. - Hitachi X807 | User Guide - Page 8
(b) (a) (c) up (c) down Suspended from the ceiling (c) down (a) (c) up (b) • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. (a) Screen size [inch - Hitachi X807 | User Guide - Page 9
lock the elevator feet. 4. After making sure that the elevator feet are locked, put the projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. To loose an elevator foot, pull up the elevator knob on - Hitachi X807 | User Guide - Page 10
Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the AUDIO OUT AUDIO IN 4 HDMI RGB2 G/Y B/CB/PB B/CR/PR H V REMOTE CONTROL USB CONTROL Remote control LASER INDICATOR BLANK LASER ASPECT PUSH ENTER Speakers RGB IN AUDIO IN S-VIDEO OUT - Hitachi X807 | User Guide - Page 11
with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the - Hitachi X807 | User Guide - Page 12
projector for the wireless network card only. 3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover. CAUTION ►Do not touch and regions. Use the card only in the country or region where you buy it. For more information, ask your local dealer. • When using - Hitachi X807 | User Guide - Page 13
Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug - Hitachi X807 | User Guide - Page 14
laser beam at other people. The laser beam can cause vision problems. CAUTION ►Use of controls or adjustments or performance of procedures the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery - Hitachi X807 | User Guide - Page 15
inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those remote control does not function properly, attempt to change the signal frequency. Please remember that the "REMOTE FREQ." in SERVICE item of OPTION menu (&47) of the projector - Hitachi X807 | User Guide - Page 16
CB/PB when the wired control port at the bottom of the AUDIO IN 1 AUDIO IN 2 remote cVIDoEO ntrol connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo S-VIDEO mini plugs. R L AUDIO IN 3 R L AUDIO IN 4 When the - Hitachi X807 | User Guide - Page 17
. The message "Power off?" will appear on the screen for about 5 seconds. 2. Press the STANDBY/ON button on the projector or the remote control again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop - Hitachi X807 | User Guide - Page 18
HDMI MIU VIDEO S-VIDEO COMPONENT (Y, CB/PB, CR/PR) 1. Press the RGB button on the remote control to select an input port for the RGB signal. Each time you press the button, the projector switches its RGB input port as below. RGB 1 RGB 2 HDMI MIU LASER INDICATOR STANDBY/ON VIDEO RGB - Hitachi X807 | User Guide - Page 19
Mode" of MIU (56). LASER INDICATOR Selecting an aspect ratio STANDBY/ON VIDEO RGB 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. BLANK LASER For an RGB or MIU signal NORMAL 4:3 16:9 SMALL - Hitachi X807 | User Guide - Page 20
RGB BLANK LASER LEFT RIGHT Using the automatic adjustment feature 1. Press the AUTO button on the remote control. ASPECT PUSH ENTER PAGE UP PAGE DOWN F or an RGB or MIU signal The the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (46). 20 - Hitachi X807 | User Guide - Page 21
operation, press the RESET button on the remote control during the operation. To complete this operation ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not - Hitachi X807 | User Guide - Page 22
's buttons or remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, KEYSTONE, MENU, MAGNIFY and MY BUTTON1/2(except MY MEMORY or PICTURE MODE is assigned to) (45) is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might - Hitachi X807 | User Guide - Page 23
blank screen and return to the input signal screen, press the BLANK button again. ● The projector automatically returns to the input signal screen whenASPoECTne of the projector's buttons or the remote control buttons (except ASPECT, POSITION, PUSH ENTER MAGNIFY or FREEZE button, also except MY - Hitachi X807 | User Guide - Page 24
. If you want to change it to the EASY MENU, select the EASY MENU. Then press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to select an item. The display of the selected menu will be active. 3. Use the ▲/▼ cursor buttons to select an - Hitachi X807 | User Guide - Page 25
From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. EASY MENU Item ASPECT AUTO KEYSTONE EXECUTE KEYSTONE KEYSTONE Description Using the ◄/► buttons - Hitachi X807 | User Guide - Page 26
the mode for mirror status. See the MIRROR item in SETUP menu (37). Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs resetting. The usage time of the air - Hitachi X807 | User Guide - Page 27
table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table. PICTURE - Hitachi X807 | User Guide - Page 28
PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode. HIGH DEFAULT � HIGH CUSTOM � MID DEFAULT � MID CUSTOM � LOW DEFAULT LOW CUSTOM � Hi-BRIGHT-1 DEFAULT � Hi-BRIGHT-1 CUSTOM � Hi-BRIGHT-2 DEFAULT Hi-BRIGHT-2 CUSTOM � Hi-BRIGHT-3 DEFAULT - Hitachi X807 | User Guide - Page 29
iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER - Hitachi X807 | User Guide - Page 30
in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item - Hitachi X807 | User Guide - Page 31
. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature. For an RGB or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (46). 31 - Hitachi X807 | User Guide - Page 32
in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item - Hitachi X807 | User Guide - Page 33
SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. RGB RGB1 RGB2 M1-D OUT AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL CO AUDIO IN 3 AUDIO IN 4 Video G B R SCART OUT VIDEO - Hitachi X807 | User Guide - Page 34
INPUT Menu INPUT Menu (continued) Item Description Set the frame lock function on/off for each port. (1) Use the ▲/▼ buttons to select one of following ports. RGB1 ó RGB2 ó HDMI QUIT FRAME LOCK (2) Use the ◄/► buttons to turns the frame lock function on/off . TURN ON ó TURN OFF • This item can - Hitachi X807 | User Guide - Page 35
INPUT Menu (continued) INPUT Menu Item RESOLUTION Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION - Hitachi X807 | User Guide - Page 36
table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table. Item AUTO - Hitachi X807 | User Guide - Page 37
. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (52) will be displayed when projector is restarted after the power switch is turned off. 37 - Hitachi X807 | User Guide - Page 38
on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the low frequency limitations of the drivers. Adjust it depending on the user's preference. Using the ▲/▼ buttons turns the speaker function on/off. - Hitachi X807 | User Guide - Page 39
table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. SCREEN Menu - Hitachi X807 | User Guide - Page 40
SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen - Hitachi X807 | User Guide - Page 41
target image to be displayed, and press the ENTER button on the remote control when the image is displayed. The image will freeze and the will appear. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjusts the frame position. Please move the frame - Hitachi X807 | User Guide - Page 42
When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu - Hitachi X807 | User Guide - Page 43
an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table - Hitachi X807 | User Guide - Page 44
about the lamp. • For the lamp replacement, see the section "Lamp" (65, 66). FILTER TIME The filter time is the usage time of the air filter, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays - Hitachi X807 | User Guide - Page 45
AUTO ADJUST GHOST FILTER MESSAGE LENS TYPE KEY LOCK SERVICE FACTORY RESET INFORMATION REMOTE FREQ. REMOTE RECEIV. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when - Hitachi X807 | User Guide - Page 46
feature is disabled. FINE ó FAST ó DISABLE SERVICE (continued) FINE: Finer tuning including H.SIZE adjustment filter clean, setting the suitable time according to your environment of this projector. • Please check and clean the air filter periodically, even if there is no message. If the air filter - Hitachi X807 | User Guide - Page 47
on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. REMOTE RECEIV. (1) Select a remote sensor using the ▲/▼ button. 1:FRONT ó 2:TOP ó 3:REAR SERVICE - Hitachi X807 | User Guide - Page 48
(continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the PASSWORD during this time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX. • Please do - Hitachi X807 | User Guide - Page 49
press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. SECURITY (continued) 2. Using the - Hitachi X807 | User Guide - Page 50
this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to NOTE PASSWORD BOX MyScreen PASS user registration information is confirmed. ENTER PASSWORD BOX (large) 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector - Hitachi X807 | User Guide - Page 51
Afterwards, anytime the projector is restarted after Code. The projector can be projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector only when the projector is started after the Code is displayed the projector will turn off. - Hitachi X807 | User Guide - Page 52
is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was this time. Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the NOTE PASSWORD BOX Transition - Hitachi X807 | User Guide - Page 53
Code will be displayed inside the BOX. 4.4-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. ENTER PASSWORD BOX (large) 5. Using the MY TEXT PASSWORD function This item allows you to display your own message - Hitachi X807 | User Guide - Page 54
TEXT will be displayed on the INPUT-INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT during this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off menu - Hitachi X807 | User Guide - Page 55
digit inquiring code will be displayed inside the box. (3) C ontact your dealer with the 10 digit inquiring code. Your PASSWORD will be sent after your user registration information is confirmed. 55 - Hitachi X807 | User Guide - Page 56
the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide for details of MIU operation - Hitachi X807 | User Guide - Page 57
(continued) MULTI PC MODE The projector supports the Single PC mode that displays an projector, the DISPLAY USER NAME box is shown as right. MULTI PC mode The Display User Names will be shown in the DISPLAY USER NAME box. • See the User's Manual - Network Guide for details of the Display User - Hitachi X807 | User Guide - Page 58
item displays the PC-LESS PRESENTATION menu. Using the menu is able to make the projector display the images stored in an SD memory card or a USB memory, and realizes • Also these items can be set with Web Remote Control (Refer to Network Guide) except REMOVE MEDIA. (continued on next page) 58 - Hitachi X807 | User Guide - Page 59
to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Configuration Protocol) SETUP DHCP is set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the - Hitachi X807 | User Guide - Page 60
the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. (Date/Time Settings of the User's Manual Network Guide 77) Use the ▲/▼ buttons to select the mode of the network - Hitachi X807 | User Guide - Page 61
MIU Menu (continued) Item SETUP (continued) SSID (continued on next page) MIU Menu Description Use the ▲/▼ buttons to select the SSID to display the SSID menu. DEFAULT Pressing the ► or ENTER button when one of the DEFAULT (#1~#4) is selected. CUSTOM Press the ► or ENTER button when the # 5 - Hitachi X807 | User Guide - Page 62
ENTER or INPUT button, 1 character or all characters will be erased. The PROJECTOR NAME can be input up to 64 characters. (3) To change an already screen and press the ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and - Hitachi X807 | User Guide - Page 63
) The application software "PJTransfer" is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT (e-SHOT (Still Image Transfer) Display of the User's Manual - Network Guide 95) and the ► or ENTER button to display the image. • The - Hitachi X807 | User Guide - Page 64
the network settings. INFORMATION SERVICE • The PROJECTOR NAME is displayed. • Nothing (blank) is shown in the "PROJECTOR NAME" and "SSID" . Selecting this item displays the SERVICE menu. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. - Hitachi X807 | User Guide - Page 65
loosened in the previous process to lock it in place. The handles 6. Slide the lamp cover back in place and firmly fasten the screw of the lamp cover. 7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu (44). (1) Press the MENU button to display a menu - Hitachi X807 | User Guide - Page 66
used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Using the lamp for long periods of time, could cause - Hitachi X807 | User Guide - Page 67
cleaner on and around the filter cover. 3. Hold the filter cover knobs while lifting it. The filter unit made up the filter cover and others will come off. 4. Use a vacuum cleaner for the filter vent of the projector and the filter frame side of the filter unit. If the air filter is damaged or too - Hitachi X807 | User Guide - Page 68
soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air - Hitachi X807 | User Guide - Page 69
Remove the battery. 5. Put a new battery in. Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may present a holder, so be careful not to lose it. 4. Turn the projector over once more, so that the bottom faces up, and reload User's Manual (detailed) - Network Guide) 69 - Hitachi X807 | User Guide - Page 70
the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi X807 | User Guide - Page 71
the remedy, please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. A note of precaution when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the "Air filter" section of this manual (67). After you have cleaned or changed - Hitachi X807 | User Guide - Page 72
the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is - Hitachi X807 | User Guide - Page 73
air filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the remedy, please set FAN SPEED of the SERVICE "Power ON" schedule is saved to the projector. (Please refer to the User's Manual-Network Guide: Schedule Settings for more information.) NOTE • - Hitachi X807 | User Guide - Page 74
again, wait at least 10 minutes to make the projector cool down enough. 3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (47) to reset all settings to factory default. Then, if the problem is not removed after the remedy, please contact your - Hitachi X807 | User Guide - Page 75
Troubleshooting Phenomena that may be easily mistaken for machine defects ( remote control. Sound does not The AUDIO setting is not correct. come out. Correctly set the items in the AUDIO menu. 38 The audio on your HDMI equipment is not set to Linear PCM. The HDMI input on this projector supports - Hitachi X807 | User Guide - Page 76
Troubleshooting Phenomena item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal front is blocked by some objects. Remove any objects from front side of the projector. Reference page 22 26, 28, 32 32 26, 27 26, 37 65, - Hitachi X807 | User Guide - Page 77
"Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Specifications Item Product name Liquid Panel size Crystal Drive system Panel Pixels Lens Lamp Audio - Hitachi X807 | User Guide - Page 78
319 Specifications Specifications (continued) 418 [unit: mm] 78 154 139
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
±
Projector
CP-X807
User's Manual (detailed) – Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
•
is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS Labs, Inc.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.