Hitachi CPX265 Network Functions
Hitachi CPX265 - XGA LCD Projector Manual
 |
UPC - 050585151000
View all Hitachi CPX265 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CPX265 manual content summary:
- Hitachi CPX265 | Network Functions - Page 1
Projector CP-X265 User's Manual - Network Functions This manual is only intended to explain Network Functions. For safety, operations or any other issues, refer to the User's Manual, Quick Start Guide or Safety Guide. WARNING • Before using the network functions, read the User's Manual and Quick - Hitachi CPX265 | Network Functions - Page 2
Controlling the Projector via a Web Browser You can change the settings of or control the projector remote location using SNMP software. In addition, the projector is able to send failure & warning alerts to a specified PC. (28) Controlling the Projector via Scheduling You can schedule the projector - Hitachi CPX265 | Network Functions - Page 3
connecting the projector to your network. Incorrect network configuration of this projector may cause problems on your network DHCP in network menu. (User's Manual - Operating Guide : NETWORK Menu) If a fixed / static IP address is required, please configure your projector according to the steps - Hitachi CPX265 | Network Functions - Page 4
Network Functions Configuring and controlling the projector via a web browser You can adjust or control the projector via a network from a web is especially recommended that all users running Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security update - Hitachi CPX265 | Network Functions - Page 5
web browser (Continued) When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the differences between user and administrator IDs. Item Description Administrator ID - Hitachi CPX265 | Network Functions - Page 6
following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192. will be displayed. Fig. 2 (Logon with administrator ID) Fig. 3 (Logon with user ID) 3) Click the desired operation or configuration item on the main menu located - Hitachi CPX265 | Network Functions - Page 7
Information All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector's current network configuration settings. Item DHCP - Hitachi CPX265 | Network Functions - Page 8
. Configures the Default Gateway when DHCP is disabled. Configures the Projector name. Configures the location to be referred to when using SNMP activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the - Hitachi CPX265 | Network Functions - Page 9
Click the [Enable] check box when authentication is required for this port. Configures command control port 2 (Port:9715). Click the [Enable] check box to use port 9715. Click must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] - Hitachi CPX265 | Network Functions - Page 10
] button to save the settings. NOTE • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 10 - Hitachi CPX265 | Network Functions - Page 11
Alert Settings Settings Displays and configures failure & warning alerts. Item Cover Error SNMP Trap Send Mail Mail Subject Mail Text Fan Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Cover Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts - Hitachi CPX265 | Network Functions - Page 12
Mail Text Temp Error SNMP Trap Send Mail Mail Subject Mail Text Air Flow Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Lamp Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the [Enable] check box to enable e-mail alerts - Hitachi CPX265 | Network Functions - Page 13
Time Error SNMP Trap Send Mail Mail Subject Mail Text Cool Error SNMP Trap Send Mail Mail Subject Mail Text Filter Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Lamp Time Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the - Hitachi CPX265 | Network Functions - Page 14
the text of the e-mail to be sent. The length of the text can be up to 1024 alphanumeric characters. Lamp Time Alarm Configures Lamp Time Alarm alert settings. Alarm Time Configures the lamp time to alert. SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send - Hitachi CPX265 | Network Functions - Page 15
) Item Description Filter Time Alarm Configures Filter Time Alarm alert settings. Alarm Time Configures the filter time to alert can be up to 1024 alphanumeric characters. "CHANGE THE LAMP" is Configures alert settings for when "CHANGE THE LAMP" is displayed displayed. SNMP Trap Click the - Hitachi CPX265 | Network Functions - Page 16
Settings Schedule Settings Displays and configures schedule settings. Item Daily Schedule Schedule List Sunday Schedule Schedule List Monday Schedule Schedule List Tuesday Schedule Schedule List Wednesday Schedule Schedule List Thursday Schedule Schedule List Friday Schedule Schedule List Saturday - Hitachi CPX265 | Network Functions - Page 17
schedule. Click the [Enable] check box to enable specific date (No.4) scheduling. Configures the Month and date. Displays the current specific date (No.4) schedule. Configures the specific date (No.5) schedule. Click the [Enable] check box to enable specific date (No.5) scheduling. Set the Month and - Hitachi CPX265 | Network Functions - Page 18
Image Parameter Description Configures the time to execute commands. Configures the commands to be executed. Configures the parameters for power control. Configures the parameters for input switching. Configures the parameters for display of transfer image data. Click the [Register] button to - Hitachi CPX265 | Network Functions - Page 19
connection. The network connection must be restarted when the configuration settings are changed, The network connection can be restarted using [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses - Hitachi CPX265 | Network Functions - Page 20
Administrator Password Re-enter the above password for verification. User authority Configures the User ID and Password. User ID Configures the User ID. The length of the text can be up to 32 alphanumeric characters. User Password Configures the User Password. The length of the text can be up - Hitachi CPX265 | Network Functions - Page 21
(Continued) Item Description Network Control Configures the Authentication Password for the command control. Authentication Password Configures the connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the - Hitachi CPX265 | Network Functions - Page 22
Projector Control Projector Control Projector Control The items shown in the table below can be performed using the [Projector Control] menu. Select an item using the up and down arrow keys on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector. - Hitachi CPX265 | Network Functions - Page 23
Projector Control Projector Control (Continued) Item Description Image Aspect Selects the Aspect setting. Over Selects the Component terminal setting. C-Video Format Selects the Video Format setting. S-Video Format Selects the S-Video Format setting. Frame Lock Enables/Disables - Hitachi CPX265 | Network Functions - Page 24
on Turns the Auto on function On/Off. Auto off Configures the timer to shut off the projector when no signal is detected. My Button-1 Assigns the functions for the MY BUTTON1 buttons on the included remote control. My Button-2 Assigns the functions for the MY BUTTON2 buttons on the included - Hitachi CPX265 | Network Functions - Page 25
Projector Status Projector Control Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description Displays the current error status Displays the usage time for the current lamp. Displays the usage time - Hitachi CPX265 | Network Functions - Page 26
after the SMTP Port configuration settings have changed. Click [Network Restart] and configure the following items. 6) Click [Mail Settings] and configure each item. Refer to the [Mail Settings] item in [Configuring and Controlling the Projector via a Web Browser] for further information. 7) Click - Hitachi CPX265 | Network Functions - Page 27
. Click [Alert Settings] on the main menu. 9) Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser] for further information. 10) Click the [Apply] button to save the settings. Failure/Warning e-mails are formatted as - Hitachi CPX265 | Network Functions - Page 28
management software must be installed on the computer to monitor the projector via SNMP. SNMP settings (9) Configure the following items via a Restart is required after the SNMP Trap configuration settings have been changed. Click [Network Restart] and configure the following items. 5) Click - Hitachi CPX265 | Network Functions - Page 29
Scheduling Controlling the Projector via Scheduling The projector can be automatically controlled via scheduling. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display. • There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific - Hitachi CPX265 | Network Functions - Page 30
and Controlling the Projector via changed. • The battery for the built in clock may be dead if the clock loses time even when the DATE and TIME have been set correctly. Replace the battery by following the instructions on replacing the battery. (User's Manual - Operating Guide : Replacing - Hitachi CPX265 | Network Functions - Page 31
Controlling the Projector via Scheduling Schedule Settings (16) Schedule settings can be configured from a web browser. Example: If the IP address of the projector box to enable scheduling. 5) Enter the Date (Month/Day) for specific date scheduling. 6) Click [Add] and set the hour, command and - Hitachi CPX265 | Network Functions - Page 32
available via communication ports which are used for the command control (TCP #23 and TCP #9715). e-Shot (Still Image Transfer) Settings Configure the following items from a web browser when e-Shot is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168 - Hitachi CPX265 | Network Functions - Page 33
Restart] on the main menu. e-Shot (Still Image Transfer) Transmission e-Shot transmission requires an exclusive application for your PC. You can download it from the Hitachi web site. Refer to the manual for the application for instructions. 33 - Hitachi CPX265 | Network Functions - Page 34
communication port (TCP #9716) that is used for the e-Shot transmission function. Command Control Settings (9) Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the - Hitachi CPX265 | Network Functions - Page 35
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer Port (Port: 9716)]. NOTE2 • The new configuration settings are activated after restarting the network. Restart the network when any configuration settings are changed. The network connection can be restarted using [Network - Hitachi CPX265 | Network Functions - Page 36
Command Control via the Network Command format Command formats differ among the different communication ports. TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However, the following reply will be sent back in the event of - Hitachi CPX265 | Network Functions - Page 37
Command Control via the Network Reply Data format The connection ID (the data Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error code - Hitachi CPX265 | Network Functions - Page 38
Command Control via the Network Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
±
Projector
CP-X265
User’s Manual – Network Functions
This manual is only intended to explain Network Functions.
For safety, operations or any other issues, refer to the User’s Manual, Quick Start
Guide or Safety Guide.
• Before using the network functions, read the User’s Manual
and Quick Start Guide carefully to ensure your projector is set up correctly.
• After reading, keep the manuals in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Contents
Network Functions
..................................................................
2
Settings
...................................................................................
6
Projector Control
...................................................................
22
Failure & Warning Alerts via E-mail
......................................
26
Projector Management via SNMP
..........................................
28
Controlling the Projector via Scheduling
..............................
29
e-Shot (Still Image Transfer) Display
....................................
32
Command Control via the Network
.......................................
34
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
• Netscape is a registered trademark of Netscape Communications Corporation.
• JavaScript is a registered trademark of Sun Microsystems, Inc.
All other trademarks are the properties of their respective owners.