HP Latex 360 Users Guide 1

HP Latex 360 Manual

Get HP Latex 360 PDF manuals and user guides View all HP Latex 360 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Latex 360 manual content summary:

  • HP Latex 360 | Users Guide 1 - Page 1
    Latex 3-liter Ink Upgrade Kit User's Guide
  • HP Latex 360 | Users Guide 1 - Page 2
    The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein
  • HP Latex 360 | Users Guide 1 - Page 3
    tank ...9 Refill an intermediate tank manually ...12 Stop refilling an intermediate tank ...13 Cannot insert an ink cartridge or intermediate tank 13 Front-panel error codes ...13 3 Accessories ...14 Order ink supplies ...14 4 Printer specifications ...16 Power specifications ...16 ENWW
  • HP Latex 360 | Users Guide 1 - Page 4
    iv ENWW
  • HP Latex 360 | Users Guide 1 - Page 5
    kit is installed. Welcome to the 3-liter ink upgrade kit This hardware accessory for the HP Latex 360 and 370 printers has been created to allow you to use highvolume ink supplies: only unaltered, genuine HP 871 3-liter ink cartridges in all colors are supported. After this upgrade kit is installed
  • HP Latex 360 | Users Guide 1 - Page 6
    Warning labels Label Explanation Do not tread on ink supplies or tubes. 2 Chapter 1 Introduction ENWW
  • HP Latex 360 | Users Guide 1 - Page 7
    system The 3-liter ink upgrade kit changes the ink system of your HP Latex 360 or 370 printer. Intermediate tanks The 775 ml ink cartridges remain as permanent intermediate tanks for your printer. The printer now has seven intermediate tanks: magenta, light magenta, black, yellow, light cyan, cyan
  • HP Latex 360 | Users Guide 1 - Page 8
    printing is stopped. If you want to use such components, you must call an HP service representative to uninstall the upgrade kit. NOTE: Your existing printheads and maintenance cartridges continue working as before. See the HP Latex 300 Printer Series User's Guide. 4 Chapter 2 The ink system ENWW
  • HP Latex 360 | Users Guide 1 - Page 9
    ink cartridges contain a low level of ink. To maintain optimum print quality, the printheads are automatically tested at regular intervals, and automatically serviced the device. CAUTION: If you want to remove a printhead from the printer and preserve it for later use, reinstall the cap and plug, but
  • HP Latex 360 | Users Guide 1 - Page 10
    of each print job. The printer will refuse to start a print job if it detects the end of the cleaning roll. You should then replace the maintenance cartridge with a new one. Check the status of the large ink cartridges You can see the ink levels in your ink cartridges by pressing on the front
  • HP Latex 360 | Users Guide 1 - Page 11
    see on the front panel: ● OK: The cartridge is working normally, with no known problems. ● Missing: There is no cartridge present, or it is not correctly connected to the printer. ● Low: The ink level is low. ● Very low: The ink level is very low. ● Empty: The cartridge is empty. ● Reseat: You are
  • HP Latex 360 | Users Guide 1 - Page 12
    cartridge. 3. Remove the empty cartridge from the printer. Insert a large ink cartridge NOTE: The ink cartridge is supplied in an insulating bag; do not and turn it four times (rotating it through 360 degrees) as indicated on the label, to ensure that the ink is well mixed before use. 3. Tear off
  • HP Latex 360 | Users Guide 1 - Page 13
    new cartridge into its correct place on the printer. 5. Check that the rubber part around the needle in the cartridge connector is clean reasons: ● The printer notifies you that the intermediate tank has reached the end of its life and will not be refilled. When it runs out of ink, it must be
  • HP Latex 360 | Users Guide 1 - Page 14
    Remove an intermediate tank 1. On the printer's front panel, press 2. Remove the locking piece. , then Ink supplies > Replace intermediate tanks. 3. Grip the blue tab in front of the intermediate tank that you want to remove. 4. Pull the blue tab down and
  • HP Latex 360 | Users Guide 1 - Page 15
    . NOTE: Avoid touching the end of the intermediate tank that is inserted into the printer, because the connection might be coated with ink. Insert an intermediate tank Remember that you should insert an HP Latex 831 cartridge as an intermediate tank, unaltered and containing more than 500 ml of
  • HP Latex 360 | Users Guide 1 - Page 16
    Place the locking piece. 7. The front panel warns that intermediate tanks cannot be used in another printer. Acknowledge the warning. Refill an intermediate tank manually When you foresee that the ink in the intermediate tank will not be enough to complete the next job, and in consequence the job
  • HP Latex 360 | Users Guide 1 - Page 17
    additional error codes may appear: ● 26.1n:01 (where n is the ink cartridge number) An intermediate tank has been disconnected while refilling. Reconnect it. ● 47.0:01 The HP Latex 3-liter Ink Upgrade Kit is not detected. If the cable is disconnected, reconnect it. Restart the printer. ENWW
  • HP Latex 360 | Users Guide 1 - Page 18
    HP Support and check that what you want is available in your area. Order ink supplies You can order the following ink supplies for your printer. Table 3-1 Intermediate tanks HP 831A 775 ml Black Latex Ink Cartridge HP 831B 775 ml Black Latex Ink Cartridge HP 831C 775 ml Black Latex Ink Cartridge HP
  • HP Latex 360 | Users Guide 1 - Page 19
    HP 871A 3-liter Cyan Latex Ink Cartridge HP 871B 3-liter Cyan Latex Ink Cartridge HP 871C 3-liter Cyan Latex Ink Cartridge HP 871A 3-liter Magenta Latex Ink Cartridge HP 871B 3-liter Magenta Latex Ink Cartridge HP 871C 3-liter Magenta Latex Ink Cartridge HP 871A 3-liter Yellow Latex Ink Cartridge HP
  • HP Latex 360 | Users Guide 1 - Page 20
    4 Printer specifications Power specifications DC voltage Maximum load current 24 V 2.5 A NOTE: Operated from host printer. Take-up reel accessory considered. 16 Chapter 4 Printer specifications ENWW
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Latex 3-liter Ink Upgrade Kit
User’s Guide