HP EliteDisplay S140u User Guide
HP EliteDisplay S140u Manual
 |
View all HP EliteDisplay S140u manuals
Add to My Manuals
Save this manual to your list of manuals |
HP EliteDisplay S140u manual content summary:
- HP EliteDisplay S140u | User Guide - Page 1
User Guide - HP EliteDisplay S140u | User Guide - Page 2
are set forth in the express warranty statements accompanying such products and services . Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information - HP EliteDisplay S140u | User Guide - Page 3
About This Guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions - HP EliteDisplay S140u | User Guide - Page 4
iv About This Guide - HP EliteDisplay S140u | User Guide - Page 5
Cover 4 Setting Up the Monitor ...6 Installing Drivers and Connecting an HP Notebook Computer 8 Display Modes ...10 Extend Mode (Default) ...10 Support ...13 Preparing to Call Technical Support 13 Locating the Rating Labels ...13 5 Technical Specifications ...14 Monitor Specifications ...14 - HP EliteDisplay S140u | User Guide - Page 6
vi - HP EliteDisplay S140u | User Guide - Page 7
and video (with USB 3.0 cable provided) ● LED backlit panel with ultra-thin screen ● Integrated, adjustable stand transforms into carrying case that folds flat for fast, easy transport ● Built-in back panel control buttons for power and brightness adjustment ● Software and documentation disc that - HP EliteDisplay S140u | User Guide - Page 8
is included, or in your documentation kit. To locate updates to the user guide for your product, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions A USB cable for power and data is included with the monitor. Use only the - HP EliteDisplay S140u | User Guide - Page 9
the monitor in a well-ventilated area, away from excessive light, heat or moisture. Cleaning the Monitor 1. Turn off the monitor and unplug the USB cable from the back of the unit. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth. 3. For more difficult - HP EliteDisplay S140u | User Guide - Page 10
. 2. On the protective cover, locate the flap with a ridge on one side. Hold the cover with the ridge facing up and the flap over the HP logo on the monitor bezel. The top of the protective cover is now lined up with the top of the monitor. 3. Lower the protective cover - HP EliteDisplay S140u | User Guide - Page 11
flap cannot be folded over the top of the monitor, then the cover has been attached with the wrong side up. Carefully detach the cover, turn it over, and repeat the procedure. Attaching the Protective Cover and Setting Up the Monitor 5 - HP EliteDisplay S140u | User Guide - Page 12
by its protective case. The case and monitor are attached together by magnets. If held improperly, the monitor could detach from the case and fall. 1. Support the monitor with one hand and lift the flap. 6 Chapter 3 Setting Up and Using the Monitor - HP EliteDisplay S140u | User Guide - Page 13
2. Continue to support the monitor and open the protective case. 3. Set the bottom edge of the monitor on a flat surface with the protective case behind the monitor. 4. Fold the protective case toward the back of the monitor. Attaching the Protective Cover and Setting Up the Monitor 7 - HP EliteDisplay S140u | User Guide - Page 14
HP Notebook Computer IMPORTANT: On Windows Vista and later versions, DisplayLink software interacts closely with the primary graphics card. DisplayLink supports active at once Do not turn on power to the monitor HP computer. ● Go to http://www.hp.com/supportand follow the on-screen instructions - HP EliteDisplay S140u | User Guide - Page 15
in one of the following configurations: ● Insert the primary USB connector on the other end of the cable into a 3.0 USB port on the computer. ● Insert both USB connectors on the other end of the cable into two USB 2.0 ports on the computer. Installing Drivers and Connecting an HP Notebook Computer 9 - HP EliteDisplay S140u | User Guide - Page 16
After installing the software and connecting the monitor, the following icon appears in the system tray. Click the icon to open the menu to select your display mode and control the attached monitor. If the monitor does not turn on, perform the following steps: 1. Be sure that the USB cable is seated - HP EliteDisplay S140u | User Guide - Page 17
screen. To use your extended desktop, simply drag and drop your open windows over to the attached monitor. NOTE: Some applications may not support display on an extended desktop. Mirror Mode In mirror or clone mode, your original screen (the primary notebook display) is mirrored to the attached - HP EliteDisplay S140u | User Guide - Page 18
Rear Panel Controls Icon 1 2 3 Button Power Plus Minus Function Turns the monitor on or off Increases brightness Decreases brightness NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml. 12 Chapter 3 Setting Up and Using the - HP EliteDisplay S140u | User Guide - Page 19
you can: ● Chat online with an HP technician NOTE: When support chat is not available in a particular language, it is available in English. ● Find support telephone numbers ● Locate an HP service center Preparing to Call Technical Support If you cannot solve a problem with the monitor, you may need - HP EliteDisplay S140u | User Guide - Page 20
video (cable included) detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned manual for instructions on setting energy saver features (sometimes called power management features). NOTE: The above power saver feature only works
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
User Guide