Graco 3544135 Operation Manual
Graco 3544135 - Kimberly Combo, Espresso Manual
 |
UPC - 654582354350
View all Graco 3544135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Graco 3544135 manual content summary:
- Graco 3544135 | Operation Manual - Page 1
product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only. Any institutional use is strictly prohibited. Please be sure to follow the instructions for proper assembly. Use a Phillips head - Graco 3544135 | Operation Manual - Page 2
PARTS HARDWARE Tools Needed (not included) Phillips screwdriver page 2 - Graco 3544135 | Operation Manual - Page 3
STEP 1: Install Left Panel Glides (H9) on Left Side Panel (A) using Small Wood Screws (H6) STEP 2: Screw three Cam Bolts (H2) into Left Side Panel (A) page 3 - Graco 3544135 | Operation Manual - Page 4
H3 H3 H H3 H3 Step 3: Insert Cam Locks (H3) into Support Rails (E,F and G) and into Cupboard Bottom (H) Step 4: Insert five Cam Bolts into Right Side Panel (B) Align dowel holes on F and G with appropriate pre-drilled holes - Graco 3544135 | Operation Manual - Page 5
Center of F and G and Cam Bolts (H2) on C with pre-drilled holes on H. Rotate Cam Locks (H3) on H to fasten C. G H B Step 7: Align Top Back Support Rail (E) into place with pre-drilled holes on Right Side Panel (B). Use Cam Bolt (H2) to tighten F G E Step 8: Align dowels on Left Side Panel - Graco 3544135 | Operation Manual - Page 6
Step 12: Align dowels on Side Panels (A and B) with pre-drilled holes on D. Lower D onto assembled case piece. Use Cam Bolts (H3) to tighten. Place Metal Pegs (H12) into pre-drilled holes on B and C. Lower Cupboard Shelf (P) onto Metal Pegs. C A B page 6 - Graco 3544135 | Operation Manual - Page 7
Step 13: Align back panels (J and K) onto back of the assembled chifferobe. Secure back panels with Small Wood Screws (H6). 14 14a DRAWER ASSEMBLY INSTRUCTIONS 14b R page 7 - Graco 3544135 | Operation Manual - Page 8
14c 14e 14f 14d 15 FURNITURE ANTI-TIPPING KIT INSTALLATION Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap. X 1 X 1 X 2 X 1 WARNING Serious or fatal crushing injuries can occur from - Graco 3544135 | Operation Manual - Page 9
Tools Needed (not included) Stubby Screwdriver Pencil 15a Locate a 2" x 4" stud behind the wall, and make a mark. 2" x 4" wall stud Phillips screwdriver 15b Install the strap on the wall with long screw and washer. 15c Install the other end of strap on the back of dresser with short screw and - Graco 3544135 | Operation Manual - Page 10
Finish KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE. page 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Changer / Chest (5954) - Assembly and Operation Manual
Congratulations on purchasing an MDB Family product. This product will provide many years of service
if you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for
assembling the product in addition to the Allen wrench included in the hardware box. Do not use power
screwdrivers. All of our products are made from natural woods. Please understand that natural woods
have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS-
TIC VARIATIONS.
revised 26FEB2013
page 1