GE PP932EHES Quick Specs

Dimensions and Installation Information (in inches)

PP932EH

GE Profile

™

Series 30" Built-In Electric Cooktop

For answers to your Monogram

®

or GE

®

appliance

questions, visit our website at geappliances.com

or call GE Answer Center

®

service, 800.626.2000.

220575

3-1/4*

Cooktop

2-1/2**

Required

28-1/2

19-5/8

29 3/4

21-3/8

*Depth of unit at conduit connection location (rear)

is 6-1/4" on models PP975/945 and 4-3/16" on

models CP350/650, PP944/962/932/912, and

JP656/356/336. Depth of unit at baffle (front) is

4-5/8" on models PHP960/900.

**Raised bull nose countertops may require up to

3/8" additional clearance to prevent interference

with curved front.

Electrical junction

box 16" MIN.

below countertop

30" MIN. to

unprotected

cabinet

Cut should not interfere

with cabinet structure

at front

1-1/2" MIN.

(30" cooktop)

2" MIN. (Induction

and 36" cooktops)

clearance to side

wall from cut-out

1-1/2" MIN.

(30" cooktop)

2" MIN. (Induction and

36" cooktops) clearance

to side wall from cut-out

15" MIN.

to cabinet

1-3/4" to

rear wall

13" MAX.

depth

†

Note:

Check local codes for required breaker size

Important:

Requires a 5" free area between

the bottom of the cooktop to any combustible mate-

rial, i.e., shelving. Free area not required when install-

ing wall oven underneath cooktop. Refer to instal-

lation instructions. Requires a 15" minimum from

cooktop to adjacent overhead cabinets. Units are

furnished with a 48" flexible armored cable.

Note:

30" Ribbon cooktops are approved for use

over select GE 27" and GE 30" Single Wall Ovens and

Warming Drawers. Refer to cooktop and wall oven/

warming drawer installation instructions packed with

product for current -dimensional data. If installed

with a GE Profile

™

Telescopic Downdraft System,

consult both the cooktop and downdraft installation

instructions packed with product before installing.

Cooktop gas/electric supply may need to be re-routed

to install downdraft.

Consult cabinet and countertop

manufacturer’s specs for flush mount installation

prior to install.

Before installing, consult installa-

tion instructions packed with product for current

dimensional data.

Filler Trim Kit:

When replacing an old GE 30" cooktop

(with larger opening) use the following one-piece trim

kit to fill in the over-size hole. Available at additional

cost. JXTR32W (True White) JXTR32B (Black glass)

JXTR32C (True Bisque)

Specification Created 2/14

KW Rating

240V

8.6

208V

6.5

Breaker Size

240V

40 Amps

†

208V

40 Amps

†

†

Note:

Check local codes for

required breaker size

GE PP932EHES Quick Specs

GE PP932EHES Manual

GE PP932EHES manual content summary: