GE JGP628BEKBB Installation Instructions
GE JGP628BEKBB Manual
 |
UPC - 084691130246
View all GE JGP628BEKBB manuals
Add to My Manuals
Save this manual to your list of manuals |
GE JGP628BEKBB manual content summary:
- GE JGP628BEKBB | Installation Instructions - Page 1
Installation 36″ Sealed Gas Cooktop Instructions JGP628, JGP630, JGP963, JGP970, JGP975, ZGU36 Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca IN THE COMMONWEALTH OF MASSACHUSETTS: • This - GE JGP628BEKBB | Installation Instructions - Page 2
Instructions IMPORTANT SAFETY INSTRUCTIONS electrical 02269 In Canada your cooktop must be wired and fused to meet the requirements of the Canadian Electrical Code. Be sure the Street, S.W. Washington, D.C. 24010 PARTS INCLUDED 2 Screws Foam Tape (Glass Top Models Only) 2 Hold Down Brackets - GE JGP628BEKBB | Installation Instructions - Page 3
packaging materials, grate boxes, regulator with literature, and literature package from the cooktop before beginning installation. Literature Package Grate boxes Foam Packaging Cooktop C Remove Installation Instructions from literature pack and read them carefully before you begin. Be sure to - GE JGP628BEKBB | Installation Instructions - Page 4
Installation Instructions PREPARING THE OPENING 1 Maintain the following MINIMUM gas cooktop models require 7/16″ free area below cooktop height to combustible material. 2 Overall cooktop dimensions 36″ Cooktop 21″ (21-1/4″ Max. for Glass Top models) 3″ 18-7/8″ 33-11/16″ 4 Recommended Gas - GE JGP628BEKBB | Installation Instructions - Page 5
Installation Instructions Installing the Cooktop Unit 1 Locate Electrical Outlet and Gas Shut-Off Valve beneath Cabinet NEVER REUSE OLD CONNECTORS WHEN INSTALLING THIS UNIT. Shut-Off Valve Electrical Outlet 12″ Below Countertop Install a manual shut-off valve in the gas line in an easily - GE JGP628BEKBB | Installation Instructions - Page 6
Instructions InstallATION-GAS CONNECTIONS 1 Provide Adequate Gas Supply This cooktop is designed to operate on natural gas at 4″ of water column manifold pressure and 7″ of water column (W.C.) supply pressure. It is shipped from the factory set for natural gas. The convertible Valve Electrical - GE JGP628BEKBB | Installation Instructions - Page 7
individual shut-off valve during any pressure testing of the gas supply system at test pressures equal to or less than 1/2 psig (3.5 kPa). 6 INSTALLATION OVER BUILT-IN OVEN See built-in oven installation for complete installation instructions. 90° Elbow Cabinet Sides 5″ To Center of 2″ Dia. Hole - GE JGP628BEKBB | Installation Instructions - Page 8
Instructions Installation-Electrical Connections WARNING - Disconnect all electrical electrical supply and outlet An adequate electrical supply and outlet must be used to operate the electrical parts of your cooktop C A grounding adaptor will be needed to convert the old one until the outlet can be - GE JGP628BEKBB | Installation Instructions - Page 9
Installation Instructions 4 Usage situations where appliance power cord will be disconnected infrequently For 15 amp circuit only. Do not use an adaptor on a 20 amp circuit. Where - GE JGP628BEKBB | Installation Instructions - Page 10
Instructions Cooktop Burners 1 Assembling the Cooktop Burners The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while the top of the burner is removed. Do not remove the top or touch the electrode of any burner while another burner is turned on. Electrical - GE JGP628BEKBB | Installation Instructions - Page 11
electrical power. On models so equipped, check to be sure the cooktop is in the UNLOCKED position. A Push and turn a burner valve to the LITE position. All spark igniters will make a series of sparks (ticking sounds), but only the burner turned to LITE will light. • The burner should light when gas - GE JGP628BEKBB | Installation Instructions - Page 12
of fuel and pressure the cooktop was adjusted for when it left the factory. D When ordering parts, always include the serial number, model number and a code letter to ensure proper replacement parts. E Recheck Steps: Double check to make sure everything in this guide has been completed. Rechecking - GE JGP628BEKBB | Installation Instructions - Page 13
converted as described in Step 2. 13 2 adjust your cooktop for use with LP gas A Disconnect all electrical power, at the main circuit breaker or fuse box. B Shut off the gas supply to the cooktop by closing the manual shut-off valve. C Adjust the pressure regulator, by the following instructions - GE JGP628BEKBB | Installation Instructions - Page 14
Instructions Making the LP Conversion (CONT.) 3 Change Cooktop Burner Orifices A Remove the top grates, burner caps, and burner heads. Remove This Assembly B Remove the spark over the ring. Spark igniter Burner base 18,000 BTU Burner (on some models) Burner cap Burner base Burner head - GE JGP628BEKBB | Installation Instructions - Page 15
to the cooktop burner. I II III X I II III X 18,000 BTU/HR Burner (on some models) The 18,000 BTU/HR burner has LP/Propane orifices in their precise locations as noted in the illustrations above. F Return the natural gas orifices to the bracket and reattach the bracket and the instruction - GE JGP628BEKBB | Installation Instructions - Page 16
the gas line may cause an orange flame at first, but this will soon disappear. NOTE: For the 18,000 BTU/HR burner (on some models) the cooktop the cooktop gas inlet opening to alert others in the future that this appliance has been converted to LP gas. If converting back to natural gas from LP, - GE JGP628BEKBB | Installation Instructions - Page 17
de 91 cm (36″) JGP628, JGP630, JGP963, JGP970, JGP975, ZGU36 Questions? Appelez le Centre de réponse 1.800.561.3344 ou visitez notre site Web à l'adresse : www.electromenagersge.ca AVANT DE COMMENCER Avant de commencer, lisez attentivement la totalité de ces instructions. • IMPORTANT - Conservez - GE JGP628BEKBB | Installation Instructions - Page 18
codes locaux ou, en l'absence de codes locaux, au National Fuel Gas Code, ANSI Z223.1/NFPA 54 Dernière édition. • A ssurez-vous que votre table de cuisson soit bien installée par un installateur qualifié ou un technicien de service. • P our éliminer tout mouvement corporel au dessus des brûleurs - GE JGP628BEKBB | Installation Instructions - Page 19
Boîtes de grille Emballage en mousse Table de cuisson C Enlevez les instructions d'installation de la trousse de documentation et lisez-les soigneusement avant de autour de la table de cuisson puissent supporter la chaleur [pouvant atteindre 93°C (200°F)] produite par la table de cuisson. 3 - GE JGP628BEKBB | Installation Instructions - Page 20
Instructions d' la matière combustible. 2 Dimensions du découpage de la table de cuisson 91 cm (36″) 53 cm (21″) (54,6 cm [21-1/2″] max. pour table de cuisson en verre autour de la table de cuisson puissent supporter la chaleur (pouvant atteindre 93°C [200°F]) Les revêtements de - GE JGP628BEKBB | Installation Instructions - Page 21
Instructions d'Installation Installation de la table de cuisson 1 Placez la prise d' de la table de cuisson 4 Trouvez les pièces de montage Retirez les supports de fixation de la trousse de documentation. 5 Fixez les supports de fixation à la table de cuisson Enlevez la vis d'un côté de la - GE JGP628BEKBB | Installation Instructions - Page 22
Instructions de l'usine réglée pour le gaz naturel. Le régulateur de pression convertible fourni avec l'appareil doit être branché en série à la tubulure ligne d'approvisionnement qu'il s'agisse de gaz naturel ou de gaz propane (LP). POUR OBTENIR UN BON FONCTIONNEMENT, LA PRESSION MAXIMALE D'ENTRÉE AU - GE JGP628BEKBB | Installation Instructions - Page 23
pressions de test égales ou inférieures à 1/2 psig (3,5 kPa). 6 Installation sur un four encastré Consultez l'installation du four encastré pour y trouver les instructions d'installation. Coude de 90° Côtés de l'armoire 5 po. depuis le comptoir jusqu'au centre du trou de 2 po. Trou de 2 po. (20 - GE JGP628BEKBB | Installation Instructions - Page 24
Instructions d'installation Installation-Raccords Électriques AVERTISSEMENT - Débranchez tout courant électrique au niveau du disjoncteur de la maison ou de la boîte à fusibles avant d'installer. 1 RALLONGES À - GE JGP628BEKBB | Installation Instructions - Page 25
Instructions d'installation Installation-Raccords Électriques (SUITE) 4 Situation d'utilisation où le cordon d'alimentation d'un appareil électroménager est infréquemment débranché Pour un circuit électrique de 15 ampé - GE JGP628BEKBB | Installation Instructions - Page 26
Instructions d'installation BrÛleurs de la table de cuisson 1 Assemblez les brûleurs de la table de cuisson L'électrode de l'allumeur est exposée. Faites attention de - GE JGP628BEKBB | Installation Instructions - Page 27
Instructions d'installation 2 Vérifiez les allumeurs Vous devez vérifier le fonctionnement des allumeurs électriques après vous être soigneusement assuré que la table de cuisson et la ligne d' - GE JGP628BEKBB | Installation Instructions - Page 28
, et la catégorie de carburant et la pression de votre table de cuisson au départ de la fabrique. D Quand vous commandez des pièces. indiquez toujours le numéro assurer d'avoir bien suivi toutes les instructions de ce guide. Cela assure une bonne utilisation sécuritaire de la table de cuisson. 12 - GE JGP628BEKBB | Installation Instructions - Page 29
Instructions d'installation Conversion au gaz propane (LP) 1 Renseignements relatifs à la sécurité que vous devez connaître Les diaphragmes du régulateur de pression et du brûleur sont réglés pour le gaz naturel. Pour utiliser du gaz propane (LP), vous devez convertir les diaphragmes du ré - GE JGP628BEKBB | Installation Instructions - Page 30
Instructions d'installation Conversion au gaz propane (LP) (SUITE) 3 Changez les diaphragmes des brûleurs de la table de passant par le trou de la table de cuisson. Allumeur Base de brûleur Brûleur de 18000 BTU (sur certains modèles) Capuchon de brûleur Base de brûleur Tête de brûleur 3 - GE JGP628BEKBB | Installation Instructions - Page 31
cIIeIrtaines modèXles) Le brûleur de 18 000 BTU/HR a deux diaphragmes qui portent des marques de côté LP/propane à leur emplacement précis, conformément aux illustrations ci-dessus. F Remettez les diaphragmes pour gaz naturel sur le support et fixez à nouveau le support et la feuille d'instructions - GE JGP628BEKBB | Installation Instructions - Page 32
Instructions d'installation Conversion au gaz propane (LP) (SUITE) 4 Ajustez les flammes des brûleurs A Allumez tous début, mais cette couleur doit disparaître rapidement. NOTE : Pour le brûleur de 18 000 BTU/HR (sur certains modèles), vous devez tourner le bouton du brûleur de la table de cuisson
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
1
31-10612-4
(10-10
GE)
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
Installation
36
″
Sealed Gas Cooktop
Instructions
BEfORE YOU BEGIN
Read these instructions completely
and carefully.
•
IMPORTANT
—
Save these instructions
for local inspector’s use.
•
IMPORTANT
—
Observe all governing
codes and ordinances.
•
Note to Installer – Be sure to leave these
instructions with the Consumer.
•
Note to Consumer – Keep these instructions for
future reference.
•
Product failure due to improper installation is not
covered under the Warranty.
WARNING
—
This appliance must be
properly grounded.
•
IMPORTANT
—
Leak testing of the
appliance shall be conducted according to the
manufacturer’s instructions.
•
Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.
IN THE COMMONWEALTH Of
MASSACHUSETTS:
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball-type gas shut-off valves, they
shall be the T-handle type.
• A flexible gas connector, when used, must not
exceed 3 feet.
JGP628, JGP630, JGP963, JGP970,
JGP975, ZGU36
fOR YOUR SAfETY:
WARNING
—
If the information
in this manual is not followed exactly, a fire,
explosion or gas leak may result causing property
damage, personal injury or death.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance!
WHAT TO DO If YOU SMELL
GAS:
• Do not try to light any appliance. Do not touch
any electrical switch; do not use any phone in
your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
This cooktop has been design certified
by CSA International. You’ll find safety precautions
in your Owner’s Manual.
Read them carefully.
• Installation of this cooktop must conform with
local codes or, in the absence of local codes with
the National Fuel Gas Code, ANSI Z223.1/NFPA
54–Latest edition.
• Be sure your cooktop is installed properly by a
qualified installer or service technician.
• To eliminate reaching over surface burners,
cabinet storage above burner should be avoided.
• Do not install the unit near an outside door or
where a draft may affect its use.
WARNING
—
Disconnect all electrical
power at the main circuit breaker
or fuse box before installing.