GE JB450RKSS Quick Specs
GE JB450RKSS Manual
 |
View all GE JB450RKSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE JB450RKSS manual content summary:
- GE JB450RKSS | Quick Specs - Page 1
OVEN RANGE INSTALLATION INFORMATION: Before installing, consult installation instructions for GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000. 26-1/4" w/o handle 29" w/handle All GE ranges - GE JB450RKSS | Quick Specs - Page 2
JB450RF GE Appliances 30" Free-Standing Electric Range FEATURES AND BENEFITS Upfront controls - Minimize need to reach 5.0 cu. ft. oven great results Removable full-width storage drawer - Store cookware or kitchen accessories Model JB450RFSS - Stainless steel JB450RF Specification Revised 12/15
-
1 -
2
 |
 |
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Specification Revised 12/15
JB450RF
GE Appliances Series 30" Free-Standing Electric Range
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
RECEPTACLE LOCATIONS
Locally approved flexible service cord or conduit must
be used because terminals are not accessible after range
installation. See shaded area in drawing for location of
electrical outlet box. Recommended outlet locations allow
range to be installed directly against wall.
NOTE:
This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION:
Before installing,
consult installation instructions for current dimensional
data and additional requirements.
†
NOTE:
Check local codes for required breaker size.
KW RATING
240V
12.1
208V
9.1
BREAKER SIZE
240V
40 Amps
†
208V
40 Amps
†
30
"
36
"
to
36-1/2
"
11
"
46-3/4
"
29
"
26-1/4
"
47
"
w/handle
w/o handle
2-1/4"
5"
1
"
CENTER LINE
REAR
WALL
2-1/4"
7-1/2"
7"
7-1/2"
3-1/2"
2-1/4"
5"