Ganz Security ZN-MD243M ZN-MD2xxM Quick Guide
Ganz Security ZN-MD243M Manual
 |
View all Ganz Security ZN-MD243M manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security ZN-MD243M manual content summary:
- Ganz Security ZN-MD243M | ZN-MD2xxM Quick Guide - Page 1
heat sources, such as a television or oven. -Refer to your instruction manual for the operating temperature. -Keep the Network camera away from direct manual". 1. Check Contents No. Item 1 Network Camera 2 Software CD 3 Quick User Guide 4 Accessories Description ZN-MD2xx Series User's Manual - Ganz Security ZN-MD243M | ZN-MD2xxM Quick Guide - Page 2
Quick User Guide ZN-MD2xx Series Network Camera 1. Control Button -Change Video output format NTSC/PAL. (toggle) -Factory Default (Keep hold more than 10 seconds) 2. Network LED 3. Status LED 4. Reset Button 5. Video output for service monitor 6. Lock nut 7. Focus adjustment 8. Network (RJ-45 PoE - Ganz Security ZN-MD243M | ZN-MD2xxM Quick Guide - Page 3
Quick User Guide 5. Web browser connection ZN-MD2xx Series Network Camera Note : The Network camera supports Internet Explorer 7 or above. Please check version of your browser and or 1080p streaming. For further information for setup, please refer to User's manual in software CD. Ver1.00 EN 3
-
1 -
2 -
3
 |
 |
Quick User Guide
ZN-MD2xx Series Network Camera
Ver1.00 EN
1
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water.
If the Network camera gets wet, power
off immediately.
-Do not place the Network camera near heat sources, such as a television or oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to “User’s manual”.
1. Check Contents
No.
Item
Description
1
Network Camera
ZN-MD2xx Series
2
Software CD
User’s Manual, Utility software
3
Quick User Guide
This document
4
Accessories
Silica-gel
Templates for installation
Video monitor cable
Focus adjust ring
Anti reflect rubber
Tapping Screw M4x30 : 3pcs
Anchor : 3pcs
Screw M4x8
: 4pcs
Surface Mount Bracket
L-Wrench (T20)
2. Physical Description