Ganz Security NR4HL-2TB PixelMaster 4/8 Ch Quick Guide
Ganz Security NR4HL-2TB Manual
 |
View all Ganz Security NR4HL-2TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security NR4HL-2TB manual content summary:
- Ganz Security NR4HL-2TB | PixelMaster 4/8 Ch Quick Guide - Page 1
Quick Guide 4CH / 8CH Full HD NVR Installation Rear View 4 Channels 8 Channels Basic Connection port for external SATA storage (HDD). HD MONITOR Port for connecting a full HD (1920x1080) supported monitor. Use the HDMI cable to connect with a 1080p 60Hz monitor. LAN(DOWNLINK) Port for - Ganz Security NR4HL-2TB | PixelMaster 4/8 Ch Quick Guide - Page 2
on the PTZ screen. Move to the Zoom screen. Display the log list of the recent recording events. Item Description You can use the camera supporting the audio input to listen the audio. Select a camera to which the audio signal will be transferred from the connected microphone. Start the emergency - Ganz Security NR4HL-2TB | PixelMaster 4/8 Ch Quick Guide - Page 3
for RTSP and Web Service ports by clicking Port Forwarding. (The default value of the Web service port is 8080.) 4) support UPNP properly. If you see a failure message after settings, refer to the user manual of the router and configure the DMZ or port forwarding settings manually - Ganz Security NR4HL-2TB | PixelMaster 4/8 Ch Quick Guide - Page 4
use the IP address of the NVR: http://192.168.1.116:8080 For more information about the router and network setting, refer to the user manual of the respective product. 2. When the login dialog appears, enter the user name and password. The default ID and password -User name :ADMIN -Password : 1234
-
1 -
2 -
3 -
4
 |
 |
Quick Guide
4CH / 8CH Full HD NVR
Rear View
4 Channels
8 Channels
Installation
CAM1-CAM8
WAN(UPLINK)
AUDIO IN
ALARM OUT
RS-485
Power Switch
DC 12V
RS-232C
ALARM IN
AUDIO OUT
eSATA
HD MONITOR
DC 48V
Ethernet ports used for connecting the network cameras.
Network ports for connection to the internet, router or hub.
Microphone connection port.
Alarm Out port.
Communication port for connecting peripherals such as system
keyboards.
Power switch of the NVR.
Plug the power cord and turn this switch on
NVR power input port.
Connect to a 12V adapter.
Alarm input signal port.
Port for speaker connection.
Connection port for external SATA storage (HDD).
Port for connecting a full HD (1920x1080) supported monitor.
Use the HDMI cable to connect with a 1080p 60Hz monitor.
Port for connecting the dedicated network device.
(Do not share with other device )
LAN(DOWNLINK)
Power input port for the camera (PoE compliant).
Connect to a 48V adapter.
Basic Layout
Camera
Internet
Network
Attached
Storage
DMS,
Web viewer
Mobile Viewer
eSATA
Storage
box
POS
ATM
Access
controller
Control
Device
Alarm
Sensor
Speaker
Microphone
Full HD monitor
Connecting the camera
IP Camera
Hub or Router
NVR
Signal connection port for POS and ATM.
Sheduled to be upgraded
No.
Item
Description