Esoteric N-01 Firmware Update Manual
Esoteric N-01 Manual
 |
View all Esoteric N-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Esoteric N-01 manual content summary:
- Esoteric N-01 | Firmware Update Manual - Page 1
version 1 Turn the unit on while pressing the + button. Supported operating systems Windows 7 (32/64-bit) Windows 8 (32/64-bit) Windows 8.1 (32/64-bit) Windows 10 (32/64-bit) As of June, 2018 NOTE In this manual, we refer to the N-01 as "the unit". The firmware version will be shown. Display - Esoteric N-01 | Firmware Update Manual - Page 2
N-01 Firmware update manual Update procedures A micro USB cable is necessary to update the program for a different model will make this unit unusable. NOTE The screens used in these instructions are from Windows 7. 5 Click "Finish". Installing the driver for the update After installing this - Esoteric N-01 | Firmware Update Manual - Page 3
Firmware update manual 3 Press the − button twice. 5 Double-click N-01_vxxx_updater.exe. oo N-01 I/F firmware updater * Please set N-01 to F/W cannot be used for firmware updates. Always use a USB cable that supports data transmission. oo Connecting to a different USB port on the computer might - Esoteric N-01 | Firmware Update Manual - Page 4
N-01 7 When "* Writing is completed." appears, press the Enter key to close the window. 1 Device(s) found: Device [1]: STM Device in DFU Mode, that the unit has been updated to the latest version, reconnect the disconnected cables as they were before. Firmware update manual 4 0618 MA-2616A
-
1 -
2 -
3 -
4
 |
 |
1
N-01
Firmware update manual
Models covered
N-01
Equipment used
Windows computer (with built-in USB 2.0 port)
Micro USB cable
o
Cables designed only for charging cannot be used. Always use a
micro USB cable that supports data transmission.
Supported operating systems
Windows 7 (32/64-bit)
Windows 8 (32/64-bit)
Windows 8.1 (32/64-bit)
Windows 10 (32/64-bit)
As of June, 2018
NOTE
In this manual, we refer to the N-01 as “the unit”.
Checking the firmware version
1
Turn the unit on while pressing the + button.
The firmware version will be shown.
Display example
I / F
V1.00
2
After checking the firmware version, press the
MENU button.
o
If the version shown is the latest version, there is no need to
update the unit.
Microsoft and Windows are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other
countries.
Other company names and product names in this document are
the trademarks or registered trademarks of their respective owners.