Esoteric Grandioso D1X Firmware Update Manual

Esoteric Grandioso D1X Manual

Get Esoteric Grandioso D1X PDF manuals and user guides View all Esoteric Grandioso D1X manuals
Add to My Manuals
Save this manual to your list of manuals

Esoteric Grandioso D1X manual content summary:

  • Esoteric Grandioso D1X | Firmware Update Manual - Page 1
    Grandioso D1X Firmware update manual Model covered Grandioso D1X Equipment used Windows computer (with built-in USB 2.0 port) Micro USB cable oo Cables designed only for charging cannot be used. Always use a micro USB cable that supports data transmission. Supported operating systems Windows 8 (32
  • Esoteric Grandioso D1X | Firmware Update Manual - Page 2
    Grandioso D1X (left and right channel units) off. 2 Use a micro USB cable to connect the computer to the USB Micro-B SOFTWARE maintenance port on the back of the left channel unit. Computer oo Refer to the unit's operation manual use a micro USB cable that supports data transmission. oo Connecting to
  • Esoteric Grandioso D1X | Firmware Update Manual - Page 3
    Grandioso D1X Firmware update manual 1 Device(s) found: Device [1]: STM Device in DFU Mode, having [4] alternate charging cannot be used for firm- ware updates. Always use a micro USB cable that supports data transmission. 5 Double-click MQA_vxxxxxx_updater.exe. 6 Click "Connect". 7 Click the "
  • Esoteric Grandioso D1X | Firmware Update Manual - Page 4
    Grandioso D1X 8 When "Succeeded" appears, press the POWER button on the left channel unit to turn it off. Then, disconnect the micro USB cable from that unit's SOFTWARE maintenance port. Firmware update manual c 9 Update the right channel unit in the same way. 4 0420 MA-3108 A
  • 1
  • 2
  • 3
  • 4
1
Grandioso D1X
Firmware update manual
Model covered
Grandioso D1X
Equipment used
Windows computer (with built-in USB 2.0 port)
Micro USB cable
o
Cables designed only for charging cannot be used. Always use a
micro USB cable that supports data transmission.
Supported operating systems
Windows 8 (32/64-bit)
Windows 8.1 (32/64-bit)
Windows 10 (32/64-bit)
(as of February, 2020)
1. Preparation
A micro USB cable is necessary to update the firmware.
Use a
commercially-available micro USB cable.
Download the DFU driver and updaters to any location on the
computer from the following download link.
o
Double-click the downloaded files to decompress them.
DFU driver
o
Win_DFU_driver.exe
Updaters
o
D1X_IFvxxx_updater.exe
o
MQA_vxxxxxx_updater.exe
IMPORTANT NOTICE
Different firmware update programs are made for every
model. Execution of a firmware update program for a different
model will make the Grandioso D1X unusable.
NOTE
The screens used in these instructions are from Windows 10.
2. Install the DFU driver
After installing this on the computer once, installing it again will not
be necessary. Proceed to “3. Update the I/F firmware”
1
Double-click Win_DFU_driver.exe.
2
When “Press any key to continue...” appears,
press the Enter key.
Display example
* DFU driver for “Windows10 32bit” will be installed.
Press any key to continue...
NOTE
If a “User Account Control” pop-up message appears during
installation, click “Yes”.
3
When the Device Driver Installation Wizard
appears, click “Next”.
4
Click “Finish”.
Microsoft and Windows are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other
countries.
Other company names and product names in this document are
the trademarks or registered trademarks of their respective owners.