Epson XP-5200 Start Here - Installation Guide

4

Remove only the yellow tape from each ink cartridge.

Caution:

Do not remove any other labels or seals, or ink will

leak. Do not touch the areas shown here.

5

Insert the cartridge in the holder for each color. Press

each cartridge down until it clicks. Make sure all

cartridges are pushed down into place.

6

Lower the scanner unit.

Note:

Continue to lower the scanner unit even if you feel some

resistance.

7

Press

OK

. The printer starts charging the ink. Ink

charging takes approximately 5 minutes. When you see

a completion message on the printer’s LCD screen,

charging is complete.

Caution:

Don’t turn off the printer or raise the scanner unit while

it is charging or you’ll waste ink.

Note:

As part of setup, your product’s serial number will be

sent to a secure Epson server so that you can be eligible to

participate in programs we may offer from time to time, including

the Epson ink replenishment program. You will have a separate

opportunity to consent to participating in such programs.

8

Follow the on-screen instructions to adjust the print

quality of your product.

Note:

•

You need to load 4 sheets of letter-size paper before you can

adjust the print quality. See “Load paper” on this sheet for

details.

•

Select

Adjust Later

if you want to adjust the print quality later.

For more information, see the online

User’s Guide

.

IMPORTANT:

Before using this product, make sure you read

these instructions and the safety instructions in the online

User’s Guide

.

Note:

This printer is designed for use with Epson

®

cartridges only, not

third-party cartridges or ink. For important ink information, visit

http://epson.com/epsonink

(U.S.) or

http://epson.ca/epsonink

(Canada) or see your printer box.

1

Unpack

Note:

Do not open ink cartridge packages until you are ready to install

the ink. Cartridges are vacuum packed to maintain reliability.

1

Remove all protective materials from the product and lift

up the scanner unit until it locks into place.

2

Remove all protective materials from inside the product.

Caution:

Do not touch the flat white cable.

3

Lower the scanner unit.

Note:

Continue to lower the scanner unit even if you feel some

resistance.

4

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

2

Choose a setup method

The Epson Smart Panel

®

app can help you set up your printer

through an interactive, step-by-step process using your

smartphone or tablet.

If you do not want to use

a mobile device for setup,

skip to the “Turn on and

configure” section.

To use your mobile device

for setup, continue to

step 1.

OR

1

Download the Epson Smart Panel app

from your device’s app store. Do not

launch the app yet.

2

Hold the

power button until it lights up to turn on the

product.

Note:

Do not connect your product to your computer yet.

3

Launch the app and follow its instructions to set up your

product. If necessary, tap the

+

icon on the top right

corner of the app’s home screen, tap

Start setting up

,

and follow the instructions to set up your product.

For information on connecting your product to a computer,

using voice-activated printing, or solving problems, or for

details on reaching Epson support, see the sections on the

back of this sheet.

3

Turn on and configure

1

Raise up the control panel, turn on the product and wait

for the power light to turn on.

Note:

If an error code appears, turn off the product and check

that no protective material has been left inside the product.

2

Press

or

to select your language, then press

OK

.

Note:

You can change the language later using the product’s

control panel. For more information, see the online

User’s Guide

.

3

When you see the Epson Smart Panel setup screen, select

Continue setup without the app

and press

OK

.

4

Install ink cartridges

Caution:

Keep ink cartridges out of the reach of children and do not

drink the ink.

Note:

The included initial cartridges are designed for reliable printer

setup and cannot be used as replacement cartridges or resold. After

setup, the remaining ink is available for printing.

1

Lift up the scanner unit until it locks into place.

2

Gently shake the black ink cartridge.

Caution:

Do not shake the other ink cartridges.

3

Unpack the ink cartridges.

Start Here

XP-5200

Epson XP-5200 Start Here - Installation Guide

Epson XP-5200 Manual

Epson XP-5200 manual content summary: