Epson XP-430 User Manual

Epson XP-430 Manual

Epson XP-430 manual content summary:

  • Epson XP-430 | User Manual - Page 1
    : You can change the language later using the product's control panel. For more information, see the online User's Guide. 4 Load paper 3 4 1 2 Press to prime the ink delivery system. Priming takes 1 about 4 minutes. Note: • The printer is designed for use with Epson® cartridges only, not
  • Epson XP-430 | User Manual - Page 2
    connecting it with a USB cable. Make sure the printer is turned on and that it is securely connected as shown: XP-330/XP-430/XP-434 replacement ink cartridges Color Standard-capacity High-capacity Black Cyan Magenta Yellow 288 288XL 288 288XL 288 288XL 288 288XL EPSON and DURABrite are
  • Epson XP-430 | User Manual - Page 3
    -en-un XP-330/XP-430/XP-434 Français Point de départ Veuillez lire ces instructions avant d'utiliser le produit. Remarque pour les hispanophones : Pour obtenir des instructions de configuration en espagnol, consultez le guide d'installation à l'adresse www.epson.com/support/xp330sp, www.epson.com
  • Epson XP-430 | User Manual - Page 4
    branchez le câble USB. 6 Insérez le CD de votre produit ou téléchargez et exécutez le progiciel de votre produit : XP-330 : www.epson.ca/support/xp330downloadsfr XP-430 : www.epson.ca/support/xp430downloadsfr XP-434 : www.epson.ca/support/xp434downloadsfr 7 Suivez les instructions à l'écran pour ex
  • 1
  • 2
  • 3
  • 4

Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de
configuración en español, consulte la
Guía de instalación
en
www.epson.com/support/xp330sp
,
www.epson.com/support/xp430sp
o
www.epson.com/support/xp434sp
(requiere una
conexión a Internet).
1
2
3
Unpack
Turn on and configure
4
Load paper
Install ink cartridges
To select
English
as your language, press
OK
.
If you want to change the language, press
or
to select
it, then press
OK
.
Note:
You can change the language later using the product’s
control panel. For more information, see the online
User’s Guide
.
Note:
Do not open ink cartridge packages until
you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
XP-330/XP-430/XP-434 Small-in-One
®
Printer
English
Caution:
Do not lower the control
panel without first squeezing the
release bar underneath or you may
damage the product.
1
2
Press
to prime the ink delivery system. Priming takes
about 4 minutes.
Note:
The printer is designed for use with Epson
®
cartridges only,
not third-party cartridges or ink.
The cartridges included with the printer are designed for
printer setup and not for resale. After some ink is used for
priming, the rest is available for printing.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
2
1
3
4
2
1
8½ × 11 inch
(216 × 279 mm)
4 × 6 inch
(102 × 152 mm)
4 minutes
Check the current paper settings on the
control panel.
To use these settings, press
OK
. If you
want to change the settings, press
or
to select
Change
, then press
OK
. Select
paper size, press
OK
, select paper type,
then press
OK
to confirm settings.
Caution:
Do not connect to your computer yet.
2
1
1
2