Epson U01II User Manual
Epson U01II - UB Print Server Manual
 |
UPC - 000055894678
View all Epson U01II manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson U01II manual content summary:
- Epson U01II | User Manual - Page 1
EPSON OPOS ADK MANUAL User's Manual (Installer/ SetupPOS/ TMUSB) Version 2.65 Jul. 2009 - Epson U01II | User Manual - Page 2
registered trademarks of SEIKO EPSON CORPORATION. Other product and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective companies. Copyright © 2000-2009 SEIKO EPSON CORPORATION ii User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 3
Installation Using the Registry File 42 3.10. Add-in Functions (Service Pack 44 3.11. Silent Installation 47 3.12. Messages for Messages during Installation 51 3.12.3. Message during Driver Installation after EPSON OPOS ADK Installation ...... 53 3.12.4. 's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 4
Removing a Device 136 5.8. Glossary ...136 SECTION 6. EPSON TM USB DRIVER 139 6.1. Installation ...139 6.1.1. Windows 2000 139 6.1.2. Windows USB device driver 141 6.2.1. Windows 2000 141 6.3. Naming Devices ...141 6.3.1. Device Names in the Registry 141 iv User's Manual Installer, SetupPOS - Epson U01II | User Manual - Page 5
Version 2.65 Jul. 2009 6.4. Port Names on OPOS 142 SECTION 7. WARNINGS 144 7.1. Precautions for Connecting with USB I/F 144 v User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 6
2.65 Jul. 2009 This manual contains an outline of the EPSON OPOS ADK program, and provides installation and setup instructions for the OPOS Setup program. EPSON OPOS ADK contains software with API functions that can be used easily through ActiveX controls supported by Visual Basic on a computer - Epson U01II | User Manual - Page 7
open POS systems easily. 2.2. Operating Environment The EPSON OPOS ADK operates under the following environment. • 2000 Windows XP Windows Vista Windows Embedded for Point Of Service Windows Embedded POSReady 2009 * For the details of each operation COM10) 2 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 8
USB) EPSON DM-D500 EPSON DM-D500U (USB) EPSON DM-D120 *1 (For ARCX(IM-700)) *1 The operation is not supported in Windows Vista environment. MICR: EPSON TM-H5000II with MICR EPSON TM-H5000IIP with MICR EPSON TM-H5000IIU with MICR (USB) EPSON TM-H5000IIE with MICR (Ethernet) 3 User's Manual Installer - Epson U01II | User Manual - Page 9
Jul. 2009 EPSON TM-U675 with MICR EPSON TM-U675P with MICR EPSON TM-U675U with MICR (USB) EPSON TM-U675E with MICR (Ethernet) EPSON TM-U950 with MICR EPSON TM-H6000II with MICR EPSON TM-H6000IIP with MICR EPSON TM-H6000IIU with MICR (USB) EPSON TM-H6000IIE with MICR (Ethernet) EPSON TM-J7000/J7100 - Epson U01II | User Manual - Page 10
Ethernet) EPSON TM-U675 EPSON TM-U675P EPSON TM-U675U (USB) EPSON TM-U675E (Ethernet) EPSON TM-U675M EPSON TM-U675PM EPSON TM-U675MU (USB) EPSON TM-U675ME (Ethernet) EPSON TM-U950 EPSON TM-U950P EPSON TM-U230M EPSON TM-U230PM EPSON TM-U230MU (USB) EPSON TM-U230ME (Ethernet) 5 User's Manual Installer - Epson U01II | User Manual - Page 11
EPSON TM-L90 EPSON TM-L90P EPSON TM-L90U (USB) EPSON TM-L90E (Ethernet) EPSON TM-U210DM EPSON TM-U210DPM EPSON TM-U210DMU (USB) EPSON TM-U210DME (Ethernet) EPSON TM-H6000II EPSON TM-H6000IIP EPSON TM-H6000IIU (USB) EPSON TM-H6000IIE (Ethernet) EPSON TM-H6000IIM EPSON TM-H6000IIPM EPSON TM-H6000IIMU - Epson U01II | User Manual - Page 12
-U220AM EPSON TM-U220APM EPSON TM-U220AMU (USB) EPSON TM-U220AME (Ethernet) EPSON TM-U220BM EPSON TM-U220BPM EPSON TM-U220BMU (USB) EPSON TM-U220BME (Ethernet) EPSON TM-U220DM EPSON TM-U220DPM EPSON TM-U220DMU (USB) EPSON TM-U220DME (Ethernet) EPSON TM-P60 EPSON TM-P60W (IEEE802.11b) 7 User's Manual - Epson U01II | User Manual - Page 13
)) EPSON TM-H6000III EPSON TM-H6000IIIP EPSON TM-H6000IIIU (USB) EPSON TM-H6000IIIE (Ethernet) EPSON TM-H6000IIIM EPSON TM-H6000IIIPM EPSON TM-H6000IIIMU (USB) EPSON TM-H6000IIIME (Ethernet) EPSON TM-P60PEELER EPSON TM-P60PEELERW (IEEE802.11b) EPSON TM-U120M EPSON TM-U120PM EPSON TM-T88IV EPSON TM - Epson U01II | User Manual - Page 14
) EPSON TM-T70E (Ethernet) EPSON TM-295M EPSON TM-295PM EPSON TM-U950M (EPROM) EPSON TM-U950PM (EPROM) EPSON TM-U950M (FlashROM) EPSON TM-U950PM (FlashROM) EPSON TM-T88IVReStick EPSON TM-T88IVReStickP EPSON TM-T88IVReStickU (USB) EPSON TM-T88IVReStickE (Ethernet) *1 The operation is not supported in - Epson U01II | User Manual - Page 15
CheckScanner: EPSON TM-H6000II with Scanner EPSON TM-H6000IIP with Scanner EPSON TM-H6000IIU with Scanner (USB) EPSON TM-H6000IIE with Scanner (Ethernet) EPSON TM-H6000III with Scanner EPSON TM-H6000IIIP with Scanner EPSON TM-H6000IIIU with Scanner (USB) EPSON TM-H6000IIIE with Scanner (Ethernet - Epson U01II | User Manual - Page 16
Windows Embedded for Point Of Service Windows Embedded POSReady 2009 • guide. Please copy onto the hard disk as necessary. Manuals: On-line manuals are included on EPSON OPOS ADK Disk. USER'S GUIDE Information on EPSON OPOS ADK installation and setup. APPLICATION DEVELOPMENT GUIDE 11 User's Manual - Epson U01II | User Manual - Page 17
and explanations of factors governing of peripherals. The Application Development Guide is divided into common subjects and device subjects. The SAMPLE PROGRAM GUIDE Contains outlines, detailed explanations, and notes on the sample program included on the EPSON OPOS ADK. 12 User's Manual Installer, - Epson U01II | User Manual - Page 18
CO install) • Installation of the manual and the Sample Program • Installation of the driver of EPSON TM USB • Installation of the driver of parallel • Uninstallation type y Full uninstallation (all) y Custom uninstallation (3) Selection of the SO • Add-in (Service Pack, File update) • Silent mode - Epson U01II | User Manual - Page 19
FD is not supported. Install according to EPSON TM USB Driver (EPSON USB controller for TM printer EPSON OPOS USB devices are to be used. For details of EPSON TM USB Driver, please refer to the "Section 6 EPSON TM USB Drive"of this manual. 3.3.1. First Installation Without the installation of EPSON - Epson U01II | User Manual - Page 20
agreed with the contents. (3) The "Software License Agreement" dialog box is displayed. To install the EPSON OPOS ADK, the user must agree to the contents of the displayed agreement. Read the contents. of the license agreement". Then, select the [Cancel] 15 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 21
the folder name that includes the REG file. The REG file is a file for restoring information related to EPSON OPOS ADK. Use the SetupPOS utility to create this file. If an improper Registry File is selected, box. Select the [Cancel] button for quitting. 16 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 22
Selectable types are "Developer", "User" and "Custom". The details of type are as follows： Developer Components: Full installation of programs Manual SampleProgram CO: CCO CCO User Components: Full installation of programs CO: CCO - Epson U01II | User Manual - Page 23
is decided, select the [Next] button. Select the [Back] button to return to the previous dialog box. Select the [Cancel] button for quitting. 18 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 24
should be used. The folder name can be changed, or an existing folder can be selected, but if an existing folder is used, 19 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 25
contents and select the [Next] button. Select the [Back] button for return to the previous dialog box. Select the [Cancel] button for quitting. 20 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 26
the port. When the Parallel port was selected, the Lilac parallel driver is installed. When the USB port was selected, the TMUSB driver is installed. Select the [Cancel] button for quitting. (12) pressing the [Cancel] button is not guaranteed. If pressed, 21 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 27
Select in the check box whether or not to display the release note on the installed EPSON OPOS ADK. It is strongly recommended to read the notes. (14) If system files setup described in "Section 5. SetupPOS Utility" of this manual. When system rebooting is executed, SetupPOS utility does not start - Epson U01II | User Manual - Page 28
been selected, the uninstaller gets started. When the "No" has been selected, this dialog is displayed again. Select the [Cancel] button for quitting. 23 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 29
and remove, select the [Next] button. Select the [Back] button to return to the previous dialog box. Select the [Cancel] button for quitting. 24 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 30
[Next] button. When the Parallel port is selected, the Lilac parallel driver is installed. When the USB port is selected, the TMUSB driver is installed. Select the [Back] button to return to the previous dialog necessary for the version upgrade shall be 25 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 31
is completed. The SetupPOS utility starts up. Confirm the settings in accordance with the setup described in "Section 5. SetupPOS Utility" of this manual. When system rebooting is executed, SetupPOS utility does not start automatically. Please start SetupPOS utility from start menu. 26 User - Epson U01II | User Manual - Page 32
cannot be changed. If Version 2.xx prior to Version 2.60 of EPSON OPOS ADK already has been installed, when you try to install the installed with the module contained in the package. If there is a possibility that problem occurs, the "Question" dialog box is displayed and a summary is notified. - Epson U01II | User Manual - Page 33
This dialog box displays information on the settings of the already installed EPSON OPOS ADK. Confirm the contents of the list and select the [ The "Software License Agreement" dialog box is displayed. To install the EPSON OPOS ADK, the user must agree to the contents of the displayed agreement - Epson U01II | User Manual - Page 34
the folder name that includes the REG file. The REG file is a file for restoring information related to EPSON OPOS ADK. Use the SetupPOS utility to create this file. If an improper Registry File is selected, box. Select the [Cancel] button for quitting. 29 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 35
box is displayed. Select the method of connection used by device, select the [Next] button. When the Parallel port is selected, the Lilac parallel driver is installed. When the USB port is selected, the TMUSB driver is installed. Select the [Back] button to return to the previous dialog box. 30 User - Epson U01II | User Manual - Page 36
, all the information necessary for the version upgrade shall be updated. It may take a few minutes for all the operations to be completed. 31 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 37
the check box whether or not to display the release note on the installed EPSON OPOS ADK. It is strongly recommended to read the notes. (10) If system with the setup described in "Section 5. SetupPOS Utility" of this manual. When system rebooting is executed, SetupPOS utility does not start - Epson U01II | User Manual - Page 38
Version 2.65 Jul. 2009 3.3.2.3. Overwriting Version 1.xx by Version 2.60 EPSON OPOS ADK Version 1.xx can be overwritten only by Version 2.xx. The Version 2.xx overwrites all [Next] button if agreed with the contents. Select the [Cancel] button for quitting. 33 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 39
This dialog box displays information on the settings of the already installed EPSON OPOS ADK. Confirm the contents of the list and select the [Next in "3.3.1 First Installation". Please refer to "3.3.1 First Installation" of this manual. (12) The "Question" dialog box is displayed. Select the [Yes - Epson U01II | User Manual - Page 40
the check box whether or not to display the release note on the installed EPSON OPOS ADK. It is strongly recommended to read the notes. (14) If system with the setup described in "Section 5. SetupPOS Utility" of this manual. When system rebooting is executed, SetupPOS utility does not start - Epson U01II | User Manual - Page 41
1.xx : Printer, Display, Drawer are hydra settings. Version 2.60 : When printer alone is unless Printer, Display and Drawer are also installed in Version 2.60. Only the printer information is apply to the following devices. COM hydra : Printer, Display, Drawer, MICR, CheckScanner Keyboard hydra - Epson U01II | User Manual - Page 42
for all devices. When the type is decided, select the [Next] button. Select the [Back] button to return to the previous dialog box. 37 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 43
, all the information necessary for the version upgrade shall be updated. It may take a few minutes for all the operations to be completed. 38 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 44
release note on the installed EPSON OPOS ADK. It is strongly recommended to read the notes. When the installation of the parallel driver is successfully done, system the setup described in "Section 5. SetupPOS Utility" of this manual. When system rebooting is executed, SetupPOS utility does not - Epson U01II | User Manual - Page 45
. To install these files, select "Manuals" in the "Select Install Module" dialog box at installation. • EPSON TM USB Driver Files: These files are installed in the Tmusb folder under the folder where the EPSON OPOS ADK is installed. The Installer of EPSON TM USB Driver and related files are included - Epson U01II | User Manual - Page 46
Full installation Full installation installs all the supported devices. For supported devices, read the release note included in to install. 3.6. CO Registration Both CCO and EPSON CO can be installed and registered in EPSON OPOS ADK. In addition, you can also choose Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 47
will become the older version. Follow the above steps, then update the CCO again. y If you uninstall EPSON OPOS, the updated CCO will also be uninstalled. Follow the above steps, then update the CCO again. in the registry. With the SetupPOS utility, only 42 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 48
and the environment that you want to reconstruct is called "target PC". (1) Install the EPSON OPOS ADK in the main PC, and set the necessary information and the various devices using the File, the old version's information is not succeeded. 43 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 49
(Version 2.xx) of EPSON OPOS ADK with a new version. In this case, the installed devices or the files only are all updated. (1) Run the SETUP.EXE file on the service pack disk. If Setup is the [Next] button if you agree with the contents. 44 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 50
REG file. The REG file is a file for restoring information related to EPSON OPOS ADK. Use the SetupPOS utility to create this file. If an to be installed. Selectable modules are "Program Files", "Samples", and "Manuals". Installed modules cannot be selected. After selecting a module, press the - Epson U01II | User Manual - Page 51
. Select in the check box whether or not to display the release note on the installed EPSON OPOS ADK. It is strongly recommended to read the notes. When the installation of the parallel driver is successfully done, system files are renewed and a message to query rebooting method is indicated. Please - Epson U01II | User Manual - Page 52
base version and the desired devices before installing the service pack. 3.11. Silent Installation Installation can be Manuals and the Sample Programs cannot be installed when using the Silent Installation function. To use this function, take the following procedures. Install the EPSON - Epson U01II | User Manual - Page 53
Path\Setup.exe" /s /a"Full Path\OposData.reg" Adding Parameter: " /n" Example: "Full Path\Setup.exe" /s /a"Full Path\OposData.reg" /n 48 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 54
installation), then execute the Silent Installation with the service pack and the registry file for the service pack. EX: Procedures for service pack Silent Installation 2. First Silent Installation of the OPOS Version 2.xx by using the following Example: 49 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 55
.reg" 3. Next, Silent Installation of the service pack by using the following Example: "Full Path installing EPSON TM USB Driver or parallel driver with this installer, the driver being in a dialog box. Follow the instructions in them. Conditions in which messages Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 56
of this installation is different from the language of OPOS being installed. It can't be installed. For EPSON OPOS ADK to run properly, the update of Comctl32.DLL is required. The latest DLL update ca information. The uninstaller may not work correctly. 51 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 57
version is contained in the specified registry file. Information for registered devices that is not supported by the current version is contained in the specified registry file. Since the use " to continue the install and delete this device information. 52 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 58
Message during Driver Installation after EPSON OPOS ADK Installation Condition Error Message There is no driver supporting the OS currently used. The OS currently used is not supported. The specified in the command line is the parameter. illegal. 53 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 59
during registry file selection or startup A registry file created with a version that is not supported is specified. An internal processing of the registry file isn't performed smoothly due to some reasons want to update the shared OPOS information? 54 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 60
is not supported. The service pack has been already installed in the OPOS. The OPOS base version for this service pack has not for Installation • Overwriting installation is not possible when an EPSON OPOS ADK of different version or language (US version, Japanese Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 61
, install the Epson TM USB Driver (Epson USB controller for TM printer series) in advance. It is not possible to install the USB OPOS information unless the Epson TM USB driver is installed. Users of the EPSON TM USB Driver should refer to "Section 6. EPSON TM USB Driver" of this manual. • When - Epson U01II | User Manual - Page 62
. • Upon completion of the installation, a Tmusb folder that stores the installer of EPSON TM USB Driver and a Lilac folder that stores the installer of recommended parallel driver are created at the target folder. Even if these drivers are not installed with this installer, they can be installed by - Epson U01II | User Manual - Page 63
, select No. (2) The "ADK Selection" dialog box is displayed. All the currently installed EPSON OPOS ADK versions are displayed. Select the version to uninstall. Multiple versions cannot be selected. to the previous dialog box, select the [Back] button. 58 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 64
It is possible to perform uninstallation without using the user interface. This is called Silent Uninstallation. When Silent Uninstallation is used, only full 59 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 65
Uninstallation of from Version 2.00 to 2.50 (including service pack version) Example: "FullPath\Uninstaller.exe" /s When a file for recording the operation of uninstall. To uninstall the EPSON OPOS ADK, perform the following commands. (Example) "Full Path User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 66
that is made and used by ElectronicJournal> Adding Parameter: /m, /e Example: "FullPath\Uninstaller.exe" /s /z"/m /e" To specify the "/m" option and the "/e" option, use the "/z" option. 61 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 67
execution of dialog boxes or making of settings. Follow the instructions in them. Conditions in which messages appear and the messages copied to the install Unable to remove directory. Remove directory directory. manually. An illegal value has been entered on the Invalid Parameter. Required - Epson U01II | User Manual - Page 68
not uninstall the EPSON TM USB Driver and the recommended parallel driver that are provided by drivers. • If the parameter "/m" is specified for the Silent Installer, it operates in Silent mode. For this reason, after the Silent Uninstaller is finished, do not execute the installer. 63 User's Manual - Epson U01II | User Manual - Page 69
Utility SetupPOS is a setup utility for registering, modifying, or deleting devices and port environments of EPSON OPOS ADK to the system registry. On Windows 2000, Windows XP or Windows Vista, depending on window. From the shortcut menu, select Close. 64 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 70
command to display properties of the item selected in the left or right pane. The properties can only be viewed but not modified. 65 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 71
follows: Device class/device class name This gives information about EPSON OPOS ADK, CO, or version of SetupPOS. Device name key time settings and DeviceStatistics settings. *1 It becomes key hook driver in case of the MSR and Keylock. Port connection This User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 72
Use this menu command to invert the sate of the selection of all items displayed in the right pane. vi. Add New Device 67 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 73
see the Section 5. "5.3.1. Using the Add New Device wizard" of this manual. On Windows 2000, Windows XP and Windows Vista, the user must have or by name. Also, only device classes which the control objects (CO) supporting the device is installed are listed in the combo box. "Choose DeviceNameKey" - Epson U01II | User Manual - Page 74
master device only or all including the slave devices. Delete of ElectronicJournal device If an Electronic Journal device is deleted, a data file confirmation 69 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 75
files are not deleted, if is possible that the files will not be able to be deleted using EPSON OPOS ADK. If no device name key or logical device name is selected, then this operation becomes disabled [Yes] button and the logical device name is changed. 70 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 76
LPT, USB, Ethernet, IEEE802.11b, or devices using the keyboard interface (such as Printer, LineDisplay, CashDrawer, MSR, Keylock, MICR, CheckScanner, ElectronicJournal). Communication Settings of slave permissions in order to use this function. 71 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 77
Version 2.65 Jul. 2009 72 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 78
For USB port, the ports, which can be connected by the USB driver when the "Communication Settings" dialog box appears, become the selectable range. If to the Section 5. "5.3.2. Using the USB Auto Setting wizard" of this manual. [Update] button Use this button to update the IP address or host - Epson U01II | User Manual - Page 79
" apply to the serial port. Change these settings to match the printer's settings. If the detailed settings of a master device in Hydra INF file). For information on parity bit of the device, refer to the hardware manual of the device. If the selected port is parallel, USB, network, wireless port, - Epson U01II | User Manual - Page 80
INF file). For information on handshake of the device, refer to the hardware manual of the device. If the selected port is parallel, USB, network, displayed but cannot be modified. "InputBuf" edit field This edit field supports only Version 1.xx devices. Use this edit field to display or set - Epson U01II | User Manual - Page 81
" dialog box and change the device specific settings for the selected device. If the selected device does not support device specific settings, then this button is disabled. For details, refer to the manual of the device. [OK] button Use this button to close the dialog box and save the device - Epson U01II | User Manual - Page 82
device" check button If the [Yes] button is selected, then the EPSON Keyboard Hook Control utility (hereafter referred to as "Hook Control") is placed To avoid this problem, it is necessary to register the hook control utility as the target of this device. If no keyboard-monitoring driver is used, - Epson U01II | User Manual - Page 83
interface and keyboard monitoring driver (EPSONHKO). However, this driver differs form version 1.xx for change of the position. Then follow the instructions and modify the position so that the key position support device specific settings, then this button becomes disabled. For details, see the manual - Epson U01II | User Manual - Page 84
icons. It is possible to display information using one of the following menu commands: [Large Icon], [Small Icon], [List], or [Details]. When selecting 79 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 85
together with the command. Once set, the setting remains effective even when restarting the system. As the default, "Device Class View" is selected. 80 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 86
" or "by Name". If "by Standard" is selected, then device classes supported by EPSON have the priority in the display. If "by Name" is selected, then 4. ElectronicJournal 5. MICR 6. CheckScanner 7. MSR 8. Keylock 9. Scanner 10. HardTotals 11. CashChanger 12. CoinDispenser 13. POSKeyboad 14. - Epson U01II | User Manual - Page 87
CheckHealth Interactive executes an interactive test with device. The supported service object usually provides a dialog box to display the test this operation becomes disabled. Also, if the selected device does not support device specific settings, then this operation becomes disabled. On Windows - Epson U01II | User Manual - Page 88
configuration key of the registry are always saved. [Selecting] button Use this button to export only the OPOS registry settings for the item 83 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 89
necessary to use this dialog box. The default range depends on the PC, but the acceptable range are as follows: COM port : 10 84 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 90
settings" dialog box and set the trace settings of OPOS ADK. Note that for version 1.xx, the trace function can be used only if an EPSON OPOS ADK supporting 85 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 91
function provides support for application permissions in order to use this function. When EPSON CO is used, the log of all devices . "Global Trace" : Trace all OPOS devices (EPSON devices only). "Private Trace" : Trace only the printer and the user uses the line display to set trace to " - Epson U01II | User Manual - Page 92
(even error log file of POSPrinter), log information of the following device don't be recorded. To avoid this problem, please don't use the same name as the other log file. If a special trace log file is box by clicking this button. iv. Message Handling 87 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 93
" dialog box and set the Sleep time of Win32 API. In the programs for waiting for input from device inside the driver or long processing programs, to keep the CPU time use exclusively, EPSON OPOS ADK calls Sleep (a WIN32 API) and specifies the time to pass control to other programs. 88 User - Epson U01II | User Manual - Page 94
API. The acceptable range is 0 to 999. [OK] button Close the dialog box and save the sleep time to the registry. [Cancel] button 89 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 95
" radio button Use the radio buttons to specify the sending conditions of DataEvent when AutoDisable = TRUE. This button is available only when using EPSON OPOS ADK version 1.xx. For "Open, Claim&Enable" (default): Immediately after SO receives the data notified as DataEvent, DeviceEnabled is set to - Epson U01II | User Manual - Page 96
the prior to Version 2.60 of EPSON OPOS ADK already has been installed Default setting Ver2.60 specification Pre-Ver2.60 specification The target categories are as follows: POSPrinter LineDisplay CashDrawer (ElectronicJournal) 91 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 97
error code> LineDisplay CashDrawer Scanner MSR "POS Printer [Prior to Ver2.0]" check box This check box is available only when using EPSON OPOS ADK version 1.xx. Use this check For version 2.xx, because the equivalent properties 92 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 98
this is possible only when version 1.xx of EPSON OPOS ADK is used. Specify a track for storing the installer to register or delete EPSON OPOS ADK/CCO. Change EPSON OPOS ADK: Start the installer ( change EPSON OPOS ADK: " The path of the install file " edit field The path of the install file of EPSON - Epson U01II | User Manual - Page 99
is selected: the path to where CCO is installed, as well as the Uninstaller file. Note that EPSON does not provide CCO installer. Obtain it separately. CCO is available from the website of Microsoft. [ the Installer or Uninstaller of the file specified 94 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 100
of EPSON OPOS ADK appears in the edit field. If a Service Pack is installed, then "SPxx" appears after the version information. "UPOS Release" edit field The version of UPOS supporting this version of EPSON OPOS first is displayed. "Device Class" combo box 95 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 101
and return to the main window. [Help] button Use this button to display the help on the dialog box by clicking this button. 96 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 102
each item. • On Windows 2000, Windows XP and Windows Vista, the user must have the administrative permissions in order to modify the settings. 97 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 103
never appear in the left pane. • A device class is also displayed even if any corresponding device is registered. However, icons of installed devices not from EPSON are dimmed. 98 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 104
port are serial port devices only. What is LPT? It indicates a parallel port. Devices appearing below this port are parallel port devices only. 99 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 105
. • COM and LPT appear according to the range set in "Port Range Setting". • USB appears according to the port range where the USB driver is created. • Network appears according to the network devices which are connected. • Wireless appears according to the wireless devices which are connected. 100 - Epson U01II | User Manual - Page 106
the left and right panes of the window support pop-up menus. On Windows 2000, box. Property Use this menu command to display "About EPSON SetupPOS" dialog box. Help Use this menu command to Use this menu command to display "About EPSON SetupPOS" dialog box. Help Use this menu command to - Epson U01II | User Manual - Page 107
. If the selected device does not support device specific settings, then this command box. If the selected device is not from EPSON, then this command is disabled. Use this menu DeviceStatistics settings". *1 It becomes key hook driver in case of the MSR and Keylock. Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 108
command to display the "Export registry" dialog box. Use this menu command to display appropriate help to the connected port (USB/ NETWORK/ WIRELESS). 103 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 109
be set, or no device has been prepared for moving yet. Use this menu command to display appropriate help to the connected port. 104 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 110
box. If the selected device does not support device specific settings, then this command is disabled dialog box. If the selected device is not from EPSON, then this command is disabled. Use this menu and "DeviceStatistics Settings". *1 It becomes key hook driver in case of the MSR and Keylock. Use - Epson U01II | User Manual - Page 111
the device added to the port with Hydra connection set up, a conformation message appears. Follow the instructions in the message. • It is possible to use the drag-and-drop operation between the right and with Hydra established on COM1 to COM2 is allowed. 106 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 112
adds devices and performs communication settings. Follow the instructions on the screen to perform the operations. 5.3.1.1. only device classes that are installed control object (CO) that supports the device. If the necessary device classes are not listed in Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 113
. If no appropriate devices are provided, then this list becomes empty. The devices are displayed according to the INF file located in the folder where EPSON OPOS ADK is installed. "Display Ver1.xx" check box This check box is checked when there is the device of version 1.xx in the list - Epson U01II | User Manual - Page 114
Name" combo box, the "Select detailed model." combo box displays the following: TM-T88IV, TM-T88IVP, and TM-T88IVU. Select one of them. "Used Port" edit field This edit field . "KBD" : Keyboard Interface. "HT" : Memory Interface. "NET" : Ethernet Port. 109 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 115
call the CheckHealth method for the selected device using Level = OPOS_CH_INTERACTIVE. If the selected device is not HardTotals, then it is not displayed. 110 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 116
selected device is not HardTotals, then it is not displayed. Even for HardTotals device, if it does not support device specific settings, it appears dimmed. [Back] button Use this button to go back to the previous the dialog box by clicking this button. 111 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 117
to use the port range dialog box to change their port ranges. For USB port, when the communication settings screen appears, all of the USB driver's connectable ports become the selectable range. 112 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 118
on the device information file (INF file). For details, refer to the hardware manual of the device. If the port selection is parallel, USB, or "None", on the device information file (INF file). For details, refer to the hardware manual of the device. If the port selection is parallel, USB, or "None", - Epson U01II | User Manual - Page 119
. The acceptable range is 0 to 9999. For details, refer to the hardware manual of the device. If the port setting is "None", this field cannot be used to change the setting. "Input SleepTime" edit field This edit field supports only Version 1.xx devices. Use this edit field to display and set the - Epson U01II | User Manual - Page 120
settings for the selected device. If the port setting is "None" or the selected device does not support device specific settings, then this button becomes dimmed and disabled. [Back] button Use this button to go on the dialog box by clicking this button. 115 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 121
already exists at the IP address or host name entered into the edit field, then a message appears and the change is not accepted. 116 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 122
. The acceptable range is 0 to 9999. For details, refer to the hardware manual of the device. If the port setting is "None", this field cannot be modified. "Input SleepTime" edit field This edit field supports only Version 1.xx devices. Use this edit field to display and set the sleep time to use - Epson U01II | User Manual - Page 123
settings for the selected device. If the port setting is "None" or the selected device does not support device specific settings, then this button becomes dimmed and disabled. [Back] button Use this button to go on the dialog box by clicking this button. 118 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 124
driver) Use this screen to set the details of Keyboard Hook Control. This screen appears if MSR/Keylock is selected in the add device screen. "Start hooking keyboard input for this device" radio buttons If the [Yes] button is selected, then the EPSON this problem, it is necessary to register the - Epson U01II | User Manual - Page 125
for change of the position. Then follow the instructions and modify the position so that the key position can If the selected device does not support device specific settings, then this keyboard interface and keyboard monitoring driver (EPSONHKO). However, this driver differs form version 1.xx - Epson U01II | User Manual - Page 126
device communication settings wizard of the "Add New Device" wizard or the "Communication settings" dialog box. (2) If multiple search target devices are found: 121 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 127
Version 2.65 Jul. 2009 "The number has been searched below." edit field Multiple port numbers in the search result appear. To set the port number manually, click the [OK] button after selecting the port number. To narrow the port number choice, press the [Search] button again. [OK] button Use this - Epson U01II | User Manual - Page 128
for the selected item by clicking the [OK] button. Usually, use this method to correct the problem. However, this approach may result in losing all of the settings. To avoid some automatic corrections, and then select or clear items in the list boxes. 123 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 129
the following fields. "All hydra device settings." check box Select or clear multiple item in the list box, and this check box indicates 124 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 130
Hydra information set in the registry. It first shows the correct setting (ON or OFF). This problem only occurs in Hydra settings for version 1.xx of the application. It occurs when there is If only some items are selected : this check box is in an 125 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 131
and return to the main window. [Help] button Use this button to display the help on the dialog box by clicking this button. 126 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 132
the following message appears: "Are you sure you want to delete all setting information about device (TM-T88IVM)?" This operation will delete the selected logical device. (2) When the device to be deleted application settings. Do you want to rename it ?" 127 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 133
Yes] button, then the following message appears: "Logical Device Name "Unit 1" is used to refer to "TM-T88IVM". Do you want to replace it ?" 5. When changing a port causes an inconsistent Hydra state, the or IP address/Host name. 128 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 134
dialog box> (1) When changing the trace settings for TM-T88IVM and selecting an another device, the following message appears: "Trace settings for POSPrinter\TM-T88IVM have been changed. Do you want to save to change it ?" 129 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 135
2.65 Jul. 2009 (1) When changing the sleep time settings for TM-T88IVM and selecting an another device, the following message appears: "POSPrinter\TM-T88IVM has been changed. Do you want to save the change?" port setting for this device will be UNDEFINED." 130 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 136
message appears: "Another company's CO registered. Cannot use this function." (2) Sharing with non-EPSON SO When accessing SO where non-EPSON SO is registered, the following message appears: "Another company's SO registered. Cannot use this function." 131 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 137
and prompts for change of the position. Following the instructions and modifying the position adjust the key position correctly. is placed in the Windows Startup group or the keyboard hook driver will automatically load each time Windows is started. Also during setup, Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 138
control utility is registered at the setup, the device with the available keyboard interface is only the device for keyboard hook control utility. 133 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 139
.) Following the instructions in each screen of the wizard EPSON TM-T88IVM POS Printer" is displayed. INF File Name : INF file name of TM-T88IVM is displayed. [Browse] button : Not used for this time. (Use this button when selecting a different INF file of 134 User's Manual - Epson U01II | User Manual - Page 140
Version 2.65 Jul. 2009 TM-T88IVM which exists other than the folder where EPSON OPOS ADK is installed.) Add New LDN : If necessary, enter "Unit1." (It is possible Settings] button: If necessary, click this button to change the device specific settings. 135 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 141
the same folder where EPSON OPOS ADK is OPOS Appliccation Programmer's Guide ". Device Name TM-88IV in the same device class (POSPrinter). Using the logical device names does not need to specify the device name key directly and so makes application development versatile. 136 User's Manual - Epson U01II | User Manual - Page 142
section of the "OPOS Appliccation Programmer's Guide ". Input buffer length It sets the not running (hangs). To solve this problem, use the Sleep function between input processes can be used only if an EPSON OPOS ADK supporting trace is installed. Message handling Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 143
In the programs for waiting for input from device inside the driver or long programs which keep the CPU time use exclusively, EPSON OPOS ADK can call Sleep (a WIN32 API) to pass connection: POSPrinter, MICR, CheckScanner, ElectronicJournal, CashDrawer 138 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 144
65 Jul. 2009 Section 6. EPSON TM USB Driver The method for installing the USB driver with Windows 2000, Windows XP or Windows Vista are explained below (note that installation in operating systems other than Windows 2000, Windows XP and Windows Vista are not supported.) 6.1. Installation The method - Epson U01II | User Manual - Page 145
when the EPSON TMFLogo Utility is being installed, the version of TMUSB driver is affected by those drivers. In such case, please update the TMUSB driver. For details of update ways, please refer to the "6.2 Updating an old version of the USB device driver" of 140 User's Manual Installer, SetupPOS - Epson U01II | User Manual - Page 146
Version 2.65 Jul. 2009 this section. y - EPSON Advance Printer Driver y - EPSON TM-J9000/J9100 Driver y - EPSON OPOS ADK for .NET y - EPSON JavaPOS ADK 6.2. Updating an old version of the USB device driver The method for updating the USB driver is explained below. It takes Windows 2000 for instance. - Epson U01II | User Manual - Page 147
the registry information generated by the USB device driver. These device names are assigned in the TM printer) *As device names are assigned to the port ID numbers, the USB tree structure for connected printers can be located anywhere. 6.4. Port Names on OPOS The USB port names used with EPSON - Epson U01II | User Manual - Page 148
TMUSB003 ... TMUSB010 TMUSB100 => USB4 => USB11 => USB101 Version 2.65 Jul. 2009 143 User's Manual Installer, SetupPOS, TMUSB - Epson U01II | User Manual - Page 149
of the same model on different USB ports, only do automatic setting for one device. y Editing the registry during automatic USB port setting is not supported. 144 User's Manual Installer, SetupPOS, TMUSB
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
 |
 |
EPSON OPOS ADK MANUAL
User's Manual
(Installer/ SetupPOS/ TMUSB)
Version 2.65
Jul. 2009