Epson TM-L90 Plus with Peeler OT-WL02 Technical Reference Guide
Epson TM-L90 Plus with Peeler Manual
 |
View all Epson TM-L90 Plus with Peeler manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson TM-L90 Plus with Peeler manual content summary:
- Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 1
Technical Reference Guide Product Overview This chapter explains the features of the product. Installation This chapter explains the connection and installation of the wireless LAN unit. M00096101 Rev.B - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 2
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. • Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 3
: • Use in an environment where it may cause interference with other devices and services. ❏ If you do not understand the radio device usage policy in a specific and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. ❏ If this - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 4
). 1. Confirm that radio and other broadcasting equipment are not used nearby before using this product. 2. When trouble occurs, for example, if the Radio Frequency module causes problems such as radio wave interference, consult your dealer. ❏ Because not all the combinations of the printer and - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 5
settings using your own judgment and assuming full responsibility, and with your full understanding of problems that may occur if you do not make any security settings. Notes on Setting SSID (Service Set Identifier) For protection of security, note the following precautions when setting the SSID - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 6
For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. You must follow warnings carefully to avoid - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 7
power control equipment, or medical equipment related to direct medical care, etc., please make your own judgment on this product's suitability after a full evaluation. Product Servicing This product cannot be serviced at the component level. In case of a fault, replace the OT-WL02 itself. 7 - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 8
About this Manual Aim of the Manual This manual is aimed to provide the necessary information on installation and network connection for this product. Manual Content The manual is made up of the following sections: Chapter 1 Product Overview Chapter 2 Installation 8 - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 9
Restriction of Use ...7 ■ Product Servicing...7 ■ About this Manual...8 Aim of the Manual ...8 Manual Content ...8 ■ Contents...9 Product Overview 17 Connecting a TM printer that supports the SimpleAP mode to the network 17 Connecting a TM printer that does not support the SimpleAP mode to the - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 10
10 - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 11
of the wireless LAN unit from the extension cable Product Configurations Accessories • Wireless LAN unit • USB extension cable • Affixing tape (1 pair, 2 pieces) • Rubber cover • User's manual 11 - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 12
Parts Name and Function Wireless LAN Indicator Wireless LAN indicator : Flashing : On : Off Status The wireless LAN unit is not connected to the printer. Or the printer power is OFF. This wireless LAN unit is connected to the printer and is in operation. This wireless LAN unit is connected to - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 13
is to turn the TM printer off. • Countries where this product can be used are limited. Since notes are provided for each country, check the manual supplied with the product. • When setting the encryption type, there are the following restrictions: • WPA/WPA2-PSK is not available in the Ad-Hoc mode - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 14
14 - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 15
the wireless LAN unit to an USB connector of the printer. The position of the USB connector varies by printer. For details, see the user's manual for each printer. 2 Wireless LAN indicator USB connector Using the USB Extension Cable 1 Attach the included rubber cover to the connector of the USB - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 16
3 Connect the USB extension cable to the USB connector of the printer. If you want to fix the wireless LAN unit, cut the included affixing tape to fit and put on the unit, and fix the unit in a place of good communication environment. Affixing tape 16 - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 17
is installed in the printer. For the initialization method, see the user's manual for the printer or the interface unit. Setting up from a Smart Device Necessary Items Prepare the following items. • Printer which supports this wireless LAN unit • Device for setting: iOS or Android device • Utility - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 18
Running Epson TM Utility 1 Run the Epson TM Utility 2 Set from "Wi-Fi Setup Wizard" in the menu. Setup and Operation Work flow Select the network you want to connect to. Enter the passkey. Perform a test print. Setting up from a Windows Computer Necessary Items Prepare the following items. • TM - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 19
Pass phrase 12345678 IP Address 192.168.192.168 An example of Connection Screen 2 • For the setting method for the computer for setting, see the manual for your computer. • If you are setting multiple TM printers, only turn on the power for the printer you are setting. You cannot set multiple - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 20
Configure the [Network] settings and the [TCP/IP] settings. For detailed information about EpsonNet Config, see the EpsonNet Config manual (operation guide) or the EpsonNet Config online help. Be sure to confirm the necessary setting information with your network administrator. Setting is completed - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 21
Installation Connecting a TM printer that does not support the SimpleAP mode to the network To connect the which is installed in the printer. For printing instructions, see the user's manual for the printer you are using or the Technical Reference Guide for the printer's interface unit. An example - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 22
point is set for the Status Sheet. The setting items are as follows. As for the setting method of the setting computer, refer to the manual of the computer used. • SSID (Ex: EpsonNet) • IP Address (Ex: 192.168.192.2) (Don't set the same address as the IP Address of the printer - Epson TM-L90 Plus with Peeler | OT-WL02 Technical Reference Guide - Page 23
obtain software and manuals from one of the following URLs. For customers in North America, go to the following web site and follow the on-screen instructions. http://www.epson.com/support/ For customers in other countries, go to the following web site: http://download.epson-biz.com/?service=pos 23
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
M00096101
Rev.B
Product Overview
This chapter explains the features of the
product.
Installation
This chapter explains the connection and
installation of the wireless LAN unit.
Technical Reference Guide