Epson SureLab D700 Start Here - Installation Guide

Epson SureLab D700 Manual

Get Epson SureLab D700 PDF manuals and user guides View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson SureLab D700 manual content summary:

  • Epson SureLab D700 | Start Here - Installation Guide - Page 1
    Epson® SureLab® D700 Series Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online Operation Guide. Choose a location for the printer Choose a location for the printer that is near a wall outlet where the power cord can be
  • Epson SureLab D700 | Start Here - Installation Guide - Page 2
    cartridge covers during the charging process. Note: The first time you install ink cartridges, the printer uses some ink to charge the printing system, so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full rated yield. Load paper 1 Make sure the
  • Epson SureLab D700 | Start Here - Installation Guide - Page 3
    sure the leading edge is cut straight across to avoid paper feeding problems. 8 Grip the handle to release the roll paper feeder and pull it out. 13 Push the roll paper feeder back into the printer. 9 Lift the inner edge guide towards you and slide it to the width of the roll paper
  • Epson SureLab D700 | Start Here - Installation Guide - Page 4
    Install the driver 1 Turn off the printer. 2 Connect a USB cable to the printer and your computer. 3 Download and run your product's software package: www.epson.com/support/d700 (U.S.) or www.epson.ca/support/d700 (Canada). 4 Follow the instructions on the screen to run the setup program.
  • 1
  • 2
  • 3
  • 4
Epson
®
SureLab
®
D700 Series
Start Here
IMPORTANT:
Before using this product, make sure you read these instructions
and the safety instructions in the online
Operation Guide
.
Choose a location for the printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface with enough space on
all sides.
13.9 in.
(354 mm)
1.2 in.
(30 mm)
1.2 in.
(30 mm)
16.9 in.
(430 mm)
1.2 in.
(30 mm)
18.1 in.
(460 mm)
11.8 in.
(300 mm)
Unpack
1
Make sure you have these items:
Power cord
Printer
Limited
warranty
2
Remove all of the packaging materials and tape from the outside of the
printer.
3
Remove the scrap paper box.
4
Remove all the packaging materials and tape from inside the roll paper
feeder.
5
Grip the handle to release the roll paper feeder and pull it out.
6
Remove the spindle and set it aside.
7
Push the roll paper feeder back into the printer.
8
Reattach the scrap paper box.
9
Open the ink cartridge covers and remove the packaging materials and
tape from inside the printer.