Epson PriorityFAX 3000 Product Support Bulletin(s)

Epson PriorityFAX 3000 Manual

Get Epson PriorityFAX 3000 PDF manuals and user guides View all Epson PriorityFAX 3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PriorityFAX 3000 manual content summary:

  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 1
    EPSON AMERICA, INC. Product Support Bulletin Subject: PriorityFax 2000/3000 Maintenance Switch Function Tables Date: 8/8/90 Page: 1 of 8 PSB No: P-0070 Originator: VB The purpose of this document is to describe the PriorityFax 2000/3000 maintenance soft switch functions and supply instructions
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 2
    PSB No: P-0070 Page: 2 of 8 5. Pressing the "STOP" key in the initial maintenance mode returns the unit to normal operation. Pressing the "STOP" key when only one digit has been entered returns the unit to the initial maintenance mode. The unit returns to the initial maintenance mode when the number
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 3
    PSB No: P-0070 Page: 3 of 8 EST PATTERN 1. To print the test pattern, enter the initial maintenance mode. Press the "0" key one time and then press the "9" key one time. The unit will continue to display "MAINTENANCE" on the LCD and print a test pattern as shown in Figure 1. 2. Upon completion of
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 4
    PSB No: P-0070 Page: 4 of 8 4. Pressing the "Next" key will store the values of WSWl in the EEPROM faancdtomryadkeefa"WulSt Wse2"ttinavgasi,lathbeleLfCorDcwhiallndgies.plWayhe"nWtShWe 2u=n1it13isDOsOeOtOt"o. the Table 3 lists the function of 8aCh WSW2 switch. 5. In this mode, every time the "
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 5
    PSB No: P- 0070 Page: 5 of 8 Table 3 - Switches 1 - 4: Start/End Transmission speed in G3 mode The starting and ending transmission speed can be set separately in G3 overseas communication mode. If there is excessive noise, decrease the starting Speed. Increase the ending Sp88d if th8 transmission
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 6
    PSB No: P- 0070 Page: 6 of 8 LCD FUNCTION TEST Operation method 1. To activate the LCD Function Test, enter the initial maintenance mode. Set the "Ring Delay" switch to the "4" position. 2. Press the "1" key one time and then press the "2" key one time. The LCD will display an oblique pattern (see
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 7
    PSB No: P- 0070 Page: 7 of 8 TAD RAM CHECK (PF3000 only) Function This function checks whether the TAD (Telephone Answering Device) RAM functions correctly. Operation Method 1. To activate the TAD RAM CHECK, enter the initial maintenance mode. Press the "1" key one time and then press the "3" key
  • Epson PriorityFAX 3000 | Product Support Bulletin(s) - Page 8
    I ISwitch tuution bkmhr Description I 01 EEPROl PARMETER I IYfTlALI2ATIOY PSB No: P- 0070 Page: 8 of 8 Suitch Y-r Ooscriptim tu'tch Setting faction I O V E R S E A S CC+WRIUTI# 0 OFT NODE mceptian) 1 al 2,3 WERSEAS cmkNI1cATIoy 2 . 3 MDDE (lrmmission) 0.0 l,O l,l Mf Imores DIS once
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
EPSON
EPSON AMERICA, INC.
INFORMATION
Product Support Bulletin
Subject: PriorityFax 2000/3000 Maintenance Switch Function Tables
Date: 8/8/90
PSB No: P-0070
Page: 1 of 8
Originator: VB
The purpose of this document is to describe the PriorityFax 2000/3000
maintenance soft switch functions and supply instructions for accessing them.
ACCESSING THE MAINTENANCE MODE
1. In normal operation mode without a document inserted, press
“FUNCTION
l
2 8 6 4” in the following sequence.
A. Press “FUNCTION” then immediately press “*“.
B. The unit will beep 3 times.
C. Immediately following the 3 beeps, press ’ 2 8 6 4 “.
NOTE: Numbers must be pressed in rapid succession.
2. The unit will emit one long beep and the LCD will display
“MAINTENANCE”, indicating it is in maintenance mode.
If the LCD does not display ‘MAINTENANCE”, press “STOP”, wait for
the LCD to display the date and time, then try step 1 again. Call
Epson Product Support at 213-539-9955 if assistance is required.
3. There are 2 levels of soft switch functions accessible in the
maintenance mode. Table 1 lists the initial level functions. Tables 2,
3, and 4 list the second level functions. The tables are located at the
end of this document.
4. To activate one of the functions listed in Tab 1, enter the initial
maintenance mode. Enter the two digit ‘Switch Number” with the keys
on the control panel. The unit will perform the function and return to
the initial maintenance mode.
The functions marked ‘NOT USED’ are either not available or require
Specialized equipment. They should only be accessed by an
authorized Epson Customer Care Center.