Epson PriorityFAX 2000 User Manual

Epson PriorityFAX 2000 Manual

Epson PriorityFAX 2000 manual content summary:

  • Epson PriorityFAX 2000 | User Manual - Page 1
    EPSON® Priority FaxTM 2000 n Owner's Manual
  • Epson PriorityFAX 2000 | User Manual - Page 2
    EPSON® Priority Fax™ 2000 n Owner's Manual
  • Epson PriorityFAX 2000 | User Manual - Page 3
    used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been OF WARRANTY Epson America makes no representations or warranties, either express or implied, by or with respect to anything in this manual, and
  • Epson PriorityFAX 2000 | User Manual - Page 4
    product. 12. Except as specifically explained in the User's Manual, do not attempt to service this product yourself. Opening or removing those covers that are when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions, since improper
  • Epson PriorityFAX 2000 | User Manual - Page 5
    telephone service. If you experience trouble with this telephone equipment, please contact the manufacturer's authorized service agency for information on obtaining service or repair. The telephone company may ask that you disconnect this equipment from the network until the problem has
  • Epson PriorityFAX 2000 | User Manual - Page 6
    2-6 Sending Photocopies 2-7 Sending Documents More Than Five Pages Long 2-7 Manual Sending 2-8 Document Sending Enhancements 2-l0 Fax Number Redialing 2-l1 Receiving Documents 2-l2 Automatic Reception 2-l2 Manual Reception 2-l2 Basic Customizing Procedures 2-l3 Setting the Date and Time
  • Epson PriorityFAX 2000 | User Manual - Page 7
    3-4 Standard Dialing 3-5 Manual Redialing 3-6 One-touch Telephone Dialing 3-6 Registering One-touch Telephone Numbers 3-7 Using One-touch Telephone Dialing 3-9 4 Using the PriorityFax Advanced Features Sending a Fax Back Message 4-1 Fax Back Message With a Document 4-2 Fax Back Message Only
  • Epson PriorityFAX 2000 | User Manual - Page 8
    5 Troubleshooting 6 Maintenance Contents Problems and Solutions 5-l Sending 5-1 Documentjam 5-1 Document doesn't enter the feeder properly 5-l Documents cannot be fed into the fax machine 5-2 Password security documents cannot be sent 5-2 You hear ringing but the other fax machine does not
  • Epson PriorityFAX 2000 | User Manual - Page 9
    PriorityFax 2000 Manual 7 Technical Specifications Glossary Index Viii
  • Epson PriorityFAX 2000 | User Manual - Page 10
    Introduction Features The Epson PriorityFax™ 2000 is an advanced desktop facsimile machine and telephone that combines high speed and quality with a wide range of features. In addition to its compact design and ease of operation, this fax machine offers the following: Ll High-speed transmission cl
  • Epson PriorityFAX 2000 | User Manual - Page 11
    PriorityFax 2000 Manual About This Manual Conventions Used in This Manual This manual provides step-by-step instructions for setting up and operating the fax machine. Chapter 1 contains information on unpacking, setting up, connecting, and testing the fax machine. Chapter 2 provides basic
  • Epson PriorityFAX 2000 | User Manual - Page 12
    make sure that no document is in the fax machine. This tells you to insert a document in the feeder. Customer service for Epson products is provided by a network of authorized Epson Customer Care Centers throughout the United States. Call the Epson Consumer Information Center at l-800-922-8911 for
  • Epson PriorityFAX 2000 | User Manual - Page 13
    1 Setting Up the PriorityFax This chapter takes you through the steps of unpacking, assembling, and testing the fax machine. Unpacking the Fax Machine As you unpack the fax machine, check that you have all the items shown below and none have been damaged during transportation. After removing the
  • Epson PriorityFAX 2000 | User Manual - Page 14
    2000 Manual WARNING Lift the fax machine by its body, never by the telephone handset or cradle. Choosing a Place for the Fax Machine Assembling the Fax Machine When you select a location for your fax machine, keep the following in mind: 0 Place the fax . To assemble the fax machine, you need only
  • Epson PriorityFAX 2000 | User Manual - Page 15
    cradle and plug in one end of the handset cord. Plug the other end of the cord into the handset, as shown below. 0 Connecting the Fax Machine to the Telephone Line Installing a single-line telephone connection Push firmly to be sure both ends of the cord are locked in place. There
  • Epson PriorityFAX 2000 | User Manual - Page 16
    PriorityFax 2000 Manual 0 Plug one end of the telephone line cord (the flat cord) into the back of the fax machine, as shown below. Plug the other end into your modular telephone wall jack (USOC 0 RJllC). Make sure both ends of the cord click securely
  • Epson PriorityFAX 2000 | User Manual - Page 17
    If you install the PriorityFax and a separate telephone on the same telephone line, do not pick up the telephone handset when you are receiving a fax. This can cause the received document to contain distorted characters. There are two types of paper holders for the PriorityFax: the output tray for
  • Epson PriorityFAX 2000 | User Manual - Page 18
    PriorityFax 2000 Manual Installing the output tray Shown below are the three ways you can front of you. Then insert 0 the wire output tray paper guide into the holes on either side of the output tray base as shown below. Place the fax machine at the edge of the table and locate the two 0
  • Epson PriorityFAX 2000 | User Manual - Page 19
    the PriorityFax Holding the output tray base level, press the tabs extending from the output tray base into the notches on the front of the fax machine, as shown in the following illustration. If you have chosen the base only installation, skip the next two steps. Place the output tray in
  • Epson PriorityFAX 2000 | User Manual - Page 20
    PriorityFax 2000 Manual For the horizontal installation, attach the output tray to the output tray base using the rear slots. For the front holes on the output tray base. Then allow the tray to hang over the edge of the fax machine operating surface to catch your incoming or copied documents. 1-8
  • Epson PriorityFAX 2000 | User Manual - Page 21
    of the paper holders, the paper rest, is used to hold documents that you have just faxed to others. To install the paper rest, follow these steps: Locate the grooves at the back of the fax machine, right below the back control panel. Holding the paper rest at about a 45o angle to
  • Epson PriorityFAX 2000 | User Manual - Page 22
    PriorityFax 2000 Manual Attaching the Quick Reference Sticker 0 0 Attach the Quick Reference sticker as follows: Remove the backing from the adhesive side of the sticker. Place the sticker in the blank space on the far left of the top control panel. Plugging in the Fax Machine The fax machine can
  • Epson PriorityFAX 2000 | User Manual - Page 23
    of the roll, as shown. Note Be sure not to insert the paper roll upside down. If the paper roll is inserted upside down, the fax machine cannot produce an image. l-11
  • Epson PriorityFAX 2000 | User Manual - Page 24
    2000 Manual Place the paper into the machine. Then pull the paper from the top of the roll and carefully insert the end of the paper under the paper cutter guide, as shown below. (Paper loading instructions are also printed inside the fax fax machine is ready for use. WARNING Always use the
  • Epson PriorityFAX 2000 | User Manual - Page 25
    Priority Fax The LCD lets you know when to replace the paper roll. When approximately 4 inches (10 cm) of paper is left, the ADD PAPER message appears on the LCD. When you see this message, remove the old roll and follow the instructions document guide on the right to match the width of the
  • Epson PriorityFAX 2000 | User Manual - Page 26
    PriorityFax 2000 Manual The ready display appears: Press START. The fax machine draws the original document and fine (for all other documents). Fine is the factory setting. See Chapter 4 for instructions on changing the resolution mode. Once copying is complete, the automatic cutter cuts the page
  • Epson PriorityFAX 2000 | User Manual - Page 27
    time. The Control Panels The Top Control Panel The buttons and switches on the top and back control panels let you control many of the fax machine's settings. The top control panel has a Liquid Crystal Display (LCD) and many buttons. The Liquid Crystal Display assists you in making settings and in
  • Epson PriorityFAX 2000 | User Manual - Page 28
    PriorityFax 2000 Manual Buttons SPKR (Speaker). Pressing this button allows you to dial without lifting the handset. CALL RSRV (Call Reservation). Pressing this button during fax transmission allows you to talk to the receiving party after the document is sent. (Both fax machines must have the call
  • Epson PriorityFAX 2000 | User Manual - Page 29
    these buttons for dialing, speed dialing, and for some customizing functions. See Chapters 2, 3, and 4. ONE-TOUCH. Each button allows you to dial a complete pre-registered fax or telephone number. See Chapters 2 and 3. 2-3
  • Epson PriorityFAX 2000 | User Manual - Page 30
    2000 Manual The Back Control Panel The back control panel contains only four controls. AUTO ANS (Automatic Answering). When this is turned on, fax the AUTO ANS label in the last space of the LCD. When off, fax reception begins if the telephone handset is not picked up within ten rings. RING
  • Epson PriorityFAX 2000 | User Manual - Page 31
    use automatic sending most of the time, all the instructions in this manual are for automatic sending. In case you do need to use manual sending, the instructions for it are on page 2-8. Included with the PriorityFax is a test document for you to send to Epson. It is ideal for your first exercise in
  • Epson PriorityFAX 2000 | User Manual - Page 32
    PriorityFax 2000 Manual 0 Dial the number of the receiving fax machine. (Include the area code if the receiving fax number is outside of your dialing area.) The number appears on the LCD display as you dial it. START/COPY Document Sending Cautions 2-6 When you press START, the fax machine pulls
  • Epson PriorityFAX 2000 | User Manual - Page 33
    STOP and then remove it. Sending Photocopies The following hints will help you avoid trouble when you send photocopied documents. Cl Make sure the document is photocopied on your document face down. Since the fax machine sends the bottom page first, the pages are sent in the correct order. Dial
  • Epson PriorityFAX 2000 | User Manual - Page 34
    PriorityFax 2000 Manual Manual Sending Press START. As the pages are fed into the fax machine, notice when there is only one page left. Then place the next four pages face down on top of the page that is still
  • Epson PriorityFAX 2000 | User Manual - Page 35
    not a speaker phone, you must use the handset to talk to the other party.) Press START and then hang up when you hear the fax tone. The fax machine pulls the document through the slot as it sends it; then it beeps once when transmission is complete. (If the Transmission Verification feature
  • Epson PriorityFAX 2000 | User Manual - Page 36
    PriorityFax 2000 Manual Document Sending Enhancements For special document sending needs you can choose one or . cl Polling. This feature provides several ways for two or more fax machines to request documents from each other. Note See Chapter 4 for instructions on how to use these options. 2-10
  • Epson PriorityFAX 2000 | User Manual - Page 37
    changing the automatic redial settings. See Chapter 4 for instructions. When you are using manual sending and you receive a busy signal, you can the handset. When you hear the dial tone, press REDIAL. The fax machine automatically redials the number. (The redial feature redials the last number dialed
  • Epson PriorityFAX 2000 | User Manual - Page 38
    PriorityFax 2000 Manual Receiving Documents The PriorityFax can receive documents either automatically or manually; you make the choice with the AUTO ANS switch on the back control panel. If Automatic Answering is on, fax reception is automatic; if it is off, fax reception is manual. Automatic
  • Epson PriorityFAX 2000 | User Manual - Page 39
    the PriorityFax Now that you have been introduced to the basics of sending and receiving documents on your PriorityFax, you can begin customizing your fax machine. This section has the basic customizing features, and Chapter 4 has the more advanced options. To set the correct date and time for the
  • Epson PriorityFAX 2000 | User Manual - Page 40
    2000 Manual Registering Your Number and Name After you use the following procedure to register your number and name, they are automatically printed (along with the page number) at the top of each page of each document you send. This makes it easy for the recipients of your faxes your fax number
  • Epson PriorityFAX 2000 | User Manual - Page 41
    Using the PriorityFax When your fax number is entered, press NEXT so you can enter a name, such as your own name or your company's name. You directly. You must use a special method to convert numbers into letters, as shown on the chart below. For example, the name Epson is 37, 48, 51, 47, 46. 2-15
  • Epson PriorityFAX 2000 | User Manual - Page 42
    PriorityFax 2000 Manual As you enter your name, you see each character appear on the display registered. Printing these lists is described later in this chapter. You can register up to five fax numbers for dialing frequentlycalled numbers by pressing just one of the five buttons to the left of the
  • Epson PriorityFAX 2000 | User Manual - Page 43
    the next available one-touch button.) You see the following display: Enter the first fax number using the keypad. You can enter up to 22 digits, but the display can show only the last 16. Include the area code if the fax number is outside of your dialing area. Note If you make a mistake
  • Epson PriorityFAX 2000 | User Manual - Page 44
    PriorityFax 2000 Manual Press NEXT. The following display appears: Enter the name of the person or company associated with the fax number, using the instructions on entering letters on page 2-15. When the name is correct, press NEXT. You see the following display: You can assign any one-touch or
  • Epson PriorityFAX 2000 | User Manual - Page 45
    the machine. Press FUNCTION. You see the function display. Press 2. Press the # cursor key until you see the following display: Using one-touch faxing Insert Document Press START. The list begins printing. When the list is finished printing, you see the function display. Press SET once to return
  • Epson PriorityFAX 2000 | User Manual - Page 46
    PriorityFax 2000 Manual Press the one-touch button for the number you want to use. If you have not registered a number for the button you pressed, the message NOT REGISTERED appears. Speed dial faxing Registering speed dial numbers Press START. The fax machine starts feeding the first page and
  • Epson PriorityFAX 2000 | User Manual - Page 47
    on the LCD: #01:9P5551212 Press NEXT. The following display appears. Enter the name of the person or company associated with the number, using the instructions for entering letters on page 2-15. 2-21
  • Epson PriorityFAX 2000 | User Manual - Page 48
    use sequential polling which is described in Chapter 4. If you do not want to assign this number to a group, press NEXT to return to the fax number display. If you want to assign this number to a group, enter the group number and press NEXT. Now your display shows #0l and the
  • Epson PriorityFAX 2000 | User Manual - Page 49
    key until you see the following display: Using speed dial faxing Press START. The list begins printing. When the list is the date/time display. After you have registered the speed dial numbers, you can send a fax to any of those numbers in just four steps: Insert the document face down in the
  • Epson PriorityFAX 2000 | User Manual - Page 50
    PriorityFax 2000 Manual Removing Numbers and Names If you wish to remove an entire fax number, telephone number, or name, use the instructions in this section. Note If you remove a fax number, this procedure also removes the name registered with it. Removing Numbers Removing Names To remove a
  • Epson PriorityFAX 2000 | User Manual - Page 51
    appears. When you see this message, remove the old roll and follow the instructions in Chapter 1 to insert the new roll. Every 12 hours your PriorityFax automatically transmission). If you have been sending and receiving a large number of faxes, the message PLS PRINT REPORT may appear on the LCD. If
  • Epson PriorityFAX 2000 | User Manual - Page 52
    PriorityFax 2000 Manual Press 2 to select the print mode. You see the following display: Press START. The report is printed out. When the list is finished printing, you
  • Epson PriorityFAX 2000 | User Manual - Page 53
    as a Telephone The PriorityFax offers sophisticated, yet easy-to-use telephone capabilities. You can use this fax machine for voice conversation even when it is set to automatic fax reception mode. This chapter covers operating the control panels, standard dialing, redialing, and one-touch
  • Epson PriorityFAX 2000 | User Manual - Page 54
    2000 Manual Buttons The four buttons to the right of the keypad and just below the LCD (Liquid Crystal Display) have several applications; some are used for fax as they relate to telephone operations. For information on button use for fax operations, see Chapter 2. KEYPAD. The keypad is used to dial
  • Epson PriorityFAX 2000 | User Manual - Page 55
    telephone company features you may have installed, such as call waiting. Note Call waiting is discouraged for use with this fax machine because it may interfere with fax transmission and reception. FUNCTION. Use this button in registering one-touch and speed dial telephone numbers. ONE-TOUCH. Each
  • Epson PriorityFAX 2000 | User Manual - Page 56
    2000 Manual The Back Control Panel The back control panel has only two controls that have telephone uses. SPEAKER (volume). Moving this dial on the back control panel of the fax the Handset Volume and Ringer Switches The handset of the fax machine is used like the handset of any other telephone.
  • Epson PriorityFAX 2000 | User Manual - Page 57
    of your dialing area.) Note Remember that you can adjust the speaker volume by moving the SPEAKER dial on the back control panel of the fax machine. When you hear the number start ringing, lift the handset. The PriorityFax is not a speaker phone. You cannot speak to someone on the other
  • Epson PriorityFAX 2000 | User Manual - Page 58
    PriorityFax 2000 Manual Manual Redialing When you receive a busy sure to lift the handset when ringing begins. Note The manual redialing feature may also be used to send a fax. See Chapter 2. The PriorityFax allows you to access up you registered. See the instructions later in this section. 3-6
  • Epson PriorityFAX 2000 | User Manual - Page 59
    Registering One-touch Telephone Numbers Using the PriorityFax as a Telephone To register the one-touch telephone numbers, follow the steps below. Make sure no document is in the machine. Press FUNCTION. You see the function display: Press 1 to choose the register mode. Press 2 to choose the one-
  • Epson PriorityFAX 2000 | User Manual - Page 60
    PriorityFax 2000 Manual Enter the first telephone number using the keypad. (Include the area code if the one-touch number is outside of your dialing area.) Note You
  • Epson PriorityFAX 2000 | User Manual - Page 61
    Using the PriorityFax as a Telephone Press the # cursor key until you see the following display: Using One-touch Telephone Dialing Press START. The list begins printing. When the list is finished printing, you see the function display. Press SET once to return to the date/time display. After you
  • Epson PriorityFAX 2000 | User Manual - Page 62
    document transmission and security. The following list allows you to easily select those features appropriate to your faxing needs. Feature Page No. FaxBackMessage 4-1 Resolution 4-3 Contrast 4-5 Beeper 4-7 LeadSheet 4-8 Transmission Verification 4-10 Automatic Redial Settings 4-11
  • Epson PriorityFAX 2000 | User Manual - Page 63
    PriorityFax 2000 Manual Fax Back Message With a Document lnsert Document To send the fax back message after a document, follow these steps: Insert the document face down in the feeder. The ready display appears: Press FUNCTION. You see the function
  • Epson PriorityFAX 2000 | User Manual - Page 64
    the Resolution Using the PriorityFax Advanced Features Press FUNCTION. You see the function display: Press 0 to enter the fax back message mode. Press SET. You see the following display: Dial the fax number and press START. You can adjust the quality of the documents produced by the PriorityFax by
  • Epson PriorityFAX 2000 | User Manual - Page 65
    PriorityFax 2000 Manual One Document Only To change the resolution for only one document, follow these steps: Insert the document face down in the feeder. The ready display
  • Epson PriorityFAX 2000 | User Manual - Page 66
    date/ time display. Remember that this procedure changes the resolution for all documents. Follow the instructions on page 4-4 to change the resolution for only one document. Setting the Contrast Your fax machine has three contrast settings: normal, light, and dark. You can change the contrast for
  • Epson PriorityFAX 2000 | User Manual - Page 67
    PriorityFax 2000 Manual One Document Only To select light or dark for a single document, follow these steps: First follow steps 1 through 4 on page 4-4 to set the resolution to
  • Epson PriorityFAX 2000 | User Manual - Page 68
    three times to register your selection and return to the date/time display. Remember that this procedure changes the contrast for all documents. Follow the instructions on page 4-6 to change the contrast for only one document. If you do not want the beeper to sound, use the following steps to turn
  • Epson PriorityFAX 2000 | User Manual - Page 69
    PriorityFax 2000 Manual HOLD/SET (3 times) Sending a Lead Sheet Press SET three times to that it is the first (or top) document in the output tray of the receiver's fax machine. If you dial the fax number manually instead of using one-touch or speed dial (explained in Chapter 21, the name of
  • Epson PriorityFAX 2000 | User Manual - Page 70
    Using the PriorityFax Advanced Features Press the # cursor key to turn Lead Sheet on. Press SET once to return to the function display. Press 6. You see the following display: Press either cursor key. The following display appears: Use the keypad to enter the total number of pages in the document
  • Epson PriorityFAX 2000 | User Manual - Page 71
    PriorityFax 2000 Manual Setting the Transmission Verification Transmission verification is a printed report that confirms that your fax reached its destination. The transmission verification message includes the date and time of transmission, the destination fax number or name, the mode of
  • Epson PriorityFAX 2000 | User Manual - Page 72
    important document. The factory setting for Automatic Redial causes the PriorityFax to redial the number you tried every five minutes until it reaches the other fax machine or until it redials six times. If you want to change the number of tries or the number of minutes between tries, follow these
  • Epson PriorityFAX 2000 | User Manual - Page 73
    PriorityFax 2000 Manual Press 1 to enter the register mode. Press 7 to enter the automatic redial mode. Enter the number of times you would like the automatic redial feature to call the fax number in the event of a busy signal. Use a zero before a single-digit entry, such as 03 for three tries.
  • Epson PriorityFAX 2000 | User Manual - Page 74
    settings you have made, what numbers you have registered, or what faxes you have sent and received, you can use the Print function of the options listed above. When you see the option you want, press START. The fax machine begins printing the list or lists. After printing is over, the LCD returns to
  • Epson PriorityFAX 2000 | User Manual - Page 75
    PriorityFax 2000 Manual Activity Report Timing Ordinarily, the PriorityFax automatically prints an activity report every 12 hours. (See page 2-25.) If you send and receive a great number of faxes, you may want to change this interval. To change the time between automatic activity reports, follow
  • Epson PriorityFAX 2000 | User Manual - Page 76
    Using the PriorityFax Advanced Features Press FUNCTION. You see the function display. Press 3 for Delayed Send. Use the # cursor key to turn the function on. The following display appears: Press SET. You see the following display. Use the keypad to select the day and time to send. For the first 0 (
  • Epson PriorityFAX 2000 | User Manual - Page 77
    PriorityFax 2000 Manual Dial the fax number and press START. You see the following password can help insure confidentiality of fax machine communication and prevent an influx of fax "junk mail." WARNING Do not use passwords casually. Only people who have Epson PriorityFax machines, who know your
  • Epson PriorityFAX 2000 | User Manual - Page 78
    Using the PriorityFax Advanced Features Press 1 to enter the register mode. Press 6. Enter a four-digit password code using the keypad. HOLD/SET (3 times) Press SET three times to register your selection and return to the date/time display. Even though you have entered a password, the password
  • Epson PriorityFAX 2000 | User Manual - Page 79
    PriorityFax 2000 Manual Activating the Password 0 WARNING cl After you activate the password, all the documents you send have this password. Therefore, only people who have Epson PriorityFax machines with the password feature, who know the password, and who know how to use the password can receive
  • Epson PriorityFAX 2000 | User Manual - Page 80
    from you, so you are the called side), and outgoing requests (you request documents from others, so you are the calling side). Your fax machine has four calling-side polling types: LI O F F The polling feature is not set Cl STANDARD Requests documents from a single destination Cl SEQUENTIAL
  • Epson PriorityFAX 2000 | User Manual - Page 81
    PriorityFax 2000 Manual Setting Called-side There are two called-side polling types: Cl O F F The polling feature is not set Cl STANDARD Your fax machine is ready to be polled. After your document is polled successfully, your fax machine prints a polling report including the time, date,
  • Epson PriorityFAX 2000 | User Manual - Page 82
    the PriorityFax Advanced Features Once the document has been polled by the calling side, the display returns to the date/time. Then the fax machine prints a polling report. To cancel called-side polling, return to steps 2 and 3 above. Select P O L L I NG : O F F , press SET twice, and press STOP
  • Epson PriorityFAX 2000 | User Manual - Page 83
    PriorityFax 2000 Manual Press SET. You see this display: Setting sequential polling Dial the fax number and press START. Once Make sure that all of the parties expect to be polled and have set their fax machines accordingly. When you are finished polling, you receive a sequential polling report.
  • Epson PriorityFAX 2000 | User Manual - Page 84
    Using the PriorityFax Advanced Features Press SET. You see the following display: Press the l cursor key followed by the group number (from 1 to 5) that you wish to poll and then press START. Once the polled documents are received, the display returns to the date and time. You receive a sequential
  • Epson PriorityFAX 2000 | User Manual - Page 85
    PriorityFax 2000 Manual Setting Delayed Polling Dial the fax number and press START. Once your fax machine sends your document request a document from a single destination at a time when you are away from your fax machine, do the following: Make sure no document is in the machine. Press FUNCTION
  • Epson PriorityFAX 2000 | User Manual - Page 86
    . If you enter the current time or an earlier time, the PriorityFax sends your document immediately. Press SET. You see the following display: Dial the fax number and press START. You see the following display: Once the document is received, the display returns to the date/ time. To cancel delayed
  • Epson PriorityFAX 2000 | User Manual - Page 87
    PriorityFax 2000 Manual Setting delayed sequential polling When you want to request documents from several fax machines when all of the parties in the group expect to be polled and have set their fax machines accordingly. When you are finished polling, you receive a sequential polling report. Make
  • Epson PriorityFAX 2000 | User Manual - Page 88
    receive a document automatically in return at a time when you are away from the office and/or when telephone rates are lower, follow the instructions below. Make sure the other party expects to be polled. When polling is complete, the called side receives a polling report. Insert a document face
  • Epson PriorityFAX 2000 | User Manual - Page 89
    PriorityFax 2000 Manual Use the # cursor key to select the turnaround option. The following display sends your document immediately. Press SET twice. The following display appears: Dial the fax number (or use the one-touch or speed-dial buttons) and press START. You see the following display:
  • Epson PriorityFAX 2000 | User Manual - Page 90
    5 Troubleshooting This chapter discusses problems you may encounter and their likely solutions. Problems and Solutions Sending This section guide. The documents may be too thick or too thin. (From 0.055 mm to 0.12 mm is the recommended range of document thickness.) Use a copier other than the fax
  • Epson PriorityFAX 2000 | User Manual - Page 91
    2000 Manual Sending (continued) Cl The documents may be too small. Use a copier other than the fax fax machine and receiving fax machine do not match. Cl You may have dialed the wrong fax number. In all cases, call the receiving party to verify the problem. You hear ringing but the other party's fax
  • Epson PriorityFAX 2000 | User Manual - Page 92
    Troubleshooting The receiving party image quality is poor. If the receiving party reports poor image quality, use the copying capability of the fax machine to copy the document. If the image quality of the copy is good, the problem , take the fax machine to an authorized Epson Customer Care Center
  • Epson PriorityFAX 2000 | User Manual - Page 93
    , and try manual reception again. Recording paper is jammed. Cl Push down on the recording paper cover button to open up the fax machine. Pull out the jammed recording paper. Use scissors to make a clean edge on the end of the paper roll. Reinsert the paper according to the instructions in Chapter
  • Epson PriorityFAX 2000 | User Manual - Page 94
    polled parties have set their fax machines for calledside polling. See Chapter 4. Received document image quality is poor. LI The scanning area may be dirty. See Chapter 6 for cleaning instructions. tl You may be using the wrong type of paper. Use Epson PriorityFax recording paper for best results
  • Epson PriorityFAX 2000 | User Manual - Page 95
    PriorityFax 2000 Manual Copying (continued) Telephone No image appears on the paper. and make another copy. If neither of these methods improves the image quality, take the fax machine to an authorized Epson Customer Care Center. To find the location of the nearest Customer Care Center, call l-800
  • Epson PriorityFAX 2000 | User Manual - Page 96
    Troubleshooting The recording paper. Load a new roll according to the instructions in Chapter 1. The recording paper may not be inserted problem during transmission. Call the sender. You may be attempting to transmit to a non-fax number. Check to make sure the number you are calling is a fax
  • Epson PriorityFAX 2000 | User Manual - Page 97
    PriorityFax 2000 Manual LCD Error Messages (continued) Ll The document was removed from the fax machine during the REDIAL function. Insert the document and begin the sending procedure again. 0 If the paper jam occurs when you are using the copy
  • Epson PriorityFAX 2000 | User Manual - Page 98
    (continued) Troubleshooting Cl These messages indicate a problem with your fax machine. Press STOP and try the operation a second time. If the error occurs again, write down the error message and the conditions during which it occurred and take the fax machine to an authorized Epson Customer Care
  • Epson PriorityFAX 2000 | User Manual - Page 99
    Unplug the machine. 0 Press down on the recording paper cover button to open up the fax 0 machine. Remove the recording paper roll. Use a soft cloth or a cotton swab clean the clear plastic cover of the scanner (indicated by the two arrows in the illustration) and the white document pressure bar
  • Epson PriorityFAX 2000 | User Manual - Page 100
    PriorityFax 2000 Manual WARNING Do not use organic solvents, such as benzene or thinner. 0 0 Cleaning the Exterior of the Fax Machine Use a dry cloth to gently wipe off any excess alcohol from the newly cleaned interior. Replace the recording paper roll as described in Chapter 1.
  • Epson PriorityFAX 2000 | User Manual - Page 101
    Compatibility Coding System Transmission Speed Document Input Size Recording Paper Roll Size Recording Paper Roll Type Effective Scanning Width Scanner Method Recorder Type Resolution Gray Scale Document Feeder Paper Cutter Dialing Method Station Memory Power Source Communications Source Network
  • Epson PriorityFAX 2000 | User Manual - Page 102
    PriorityFax 2000 Manual Operating Environment Dimensions (Including Handset) Weight (Including Handset) 41 - 95 degrees F, 10 - 75% humidity 16.5" W x 11" D x 4.7" H 13.2 lbs Specifications are subject to change without notice. 7-2
  • Epson PriorityFAX 2000 | User Manual - Page 103
    . A feature by which you can dial a number by pressing just three buttons. 203 x 98 lines per inch, the transmission mode used by the fax to transmit images containing typewritten or printed matter and lessdetailed drawings. Types of dialing; pulse is the rotary method, where the phone system counts
  • Epson PriorityFAX 2000 | User Manual - Page 104
    a number to dial out on a, 2-17, 2-21 Character code table, 2-15 Cleaning the fax machine, 6-l-2 Coding system, 7-l COMJM ERROR message, 2-9, 5-8 Continuous ringing problems, 5-2, 5-4 Contrast, 2-10 setting for one document, 4-6 setting permanently, 4-6-7 Control panels back control panel
  • Epson PriorityFAX 2000 | User Manual - Page 105
    PriorityFax 2000 Manual D E COPY button, 2-3 Copying a document as a test, l-13 Copying problems, 5-5 blank copies, 5-6 no copies come out, 5-5 print quality, 5-6 Curled page problems, 5-1, 5-4 Customer Care Centers, Introduction-3, 5-9 Customer service, Introduction-3 Customizing procedures, 2-13-
  • Epson PriorityFAX 2000 | User Manual - Page 106
    to get, Introduction-3 HL OFF switch, 3-5 HN switch, 3-4 HOLD button, 3-2, 3-3 HOLD/SET button, 2-2, 3-3 I Image quality problems, 5-3, 5-5, 5-6 Interior of fax machine, cleaning, 6-l-2 International access code, 2-17, 2-21 Interval, activity report, 4-12, 6-l K Keypad, 2-3, 3-2 L LCD
  • Epson PriorityFAX 2000 | User Manual - Page 107
    2000 Manual M N 0 P MACHINE ERROR message, 5-9 Maintenance, 6-l-2 Manual reception, 2-12 Manual reception problems, 5-4 Manual redialing, 2-l1, 3-6 Manual 2-3, 3-3 One-touch dialing problems, 5-6 One-touch faxing, 2-5, 2-l6-18 One-touch faxing problems, 5-3 One-touch fax numbers, printing a list of
  • Epson PriorityFAX 2000 | User Manual - Page 108
    with, 5-l sending, 2-7 PLS PRINT REPORT message, 2-25-26 Plugging in the fax machine, l-10 Polling called-side, 4-19, 4-20-21 calling-side, 4-19, 4-21-24 delayed, 4-24 problems, 5-4 sequential calling-side, 4-22-23 sequential delayed, 4-26-27 standard calling-side, 4-21-22 standard delayed, 4-24
  • Epson PriorityFAX 2000 | User Manual - Page 109
    2000 Manual R S Receiving documents, automatically or manually, 2-12 Receiving problems, 5-4-5 blank pages received, 5-4 curled pages, 5-4 image quality, 5-5 manual switch, 2-4, 2-12 Ringer switch, adjusting, 3-5 Ringing problems, 5-4, 5-7 Scanner method, 7-l Scanning width, effective, 7-l S. DIAL (
  • Epson PriorityFAX 2000 | User Manual - Page 110
    Single-line telephone connection, installing, l-34 Speaker button, see SPKR button SPEAKER volume dial, 2-4, 3-4 Specifications, 7-l-2 Speed dial faxing, 2-5, 2-16, 2-20-22 Speed dial faxing problems, 5-3 Speed dial fax numbers, printing a list of, 2-22 registering, 2-20-22 using, 2-23 Speed dialing
  • Epson PriorityFAX 2000 | User Manual - Page 111
    2000 Manual T U w Technical specifications, 7-l-2 Telephone connection, installing multi-line, l-5 single-line, l-3-4 Telephone line, connecting the fax machine to the, l-3-4 Telephone problems verification, setting, 4-10-11 Troubleshooting, see Problems and solutions Turnaround polling, 4-19
  • Epson PriorityFAX 2000 | User Manual - Page 112
    n EPSON AMERICA, INC. 2780 Lomita Boulevard Torrance, California 90505 Printed in Japan 4000039-01 ,Y.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

EPSON
®
Priority Fax
TM
2000
n
Owner’s Manual